Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 16572

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2022_167
id	ecaade2022_167
authors	Lin, Han, Tsai, Tsung-Han, Chen, Ting-Chia, Sheng, Yu-Ting and Wang, Shih-Yuan
year	2022
title	Robotic Additive Manufacturing of Glass Structures
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 379–388
doi	https://doi.org/10.52842/conf.ecaade.2022.2.379
summary	This paper proposes a glass 3D printing system that can be used at room temperature. The system employs high-frequency electromagnetic induction heaters and stone-ground carbon tubes to heat glass raw materials. In this study, a digital control system was fully utilised to control the extrusion of borosilicate glass materials. Through a calculated design and communication between a six-axis robot arm and an external computer, the robot’s printing path and speed and the feeding state of the glass printing machine can be automatically controlled for different geometric shapes and velocities. This study examines digital manufacturing processes and material properties to investigate the novel glass printing of textures and free-form surface modelling.
keywords	Glass, Induction Heating, Rapid Prototype, 3D Printing, Robotic Fabrication
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2003_c3-3
id	caadria2003_c3-3
authors	Lin, Meng-Yian and Kang, Jian
year	2003
title	Adding Instant Acoustic Response to Caad Animation: A Feasibility Study
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 475-486
doi	https://doi.org/10.52842/conf.caadria.2003.475
summary	Although in recent years presentation using CAAD animation has played an important role in architectural design, it is still weak in terms of acoustic environment simulation. Current acoustic simulation software are mainly for accurately calculating various acoustic indices and the calculation is normally not real-time. This research is therefore to explore the possibilities of adding instant acoustic responses to presentations using CAAD animation.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2019_403
id	caadria2019_403
authors	Lin, Xuhui and Muslimin, Rizal
year	2019
title	RESHAPE - Rapid forming and simulation system using unmanned aerial vehicles for architectural representation
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 413-422
doi	https://doi.org/10.52842/conf.caadria.2019.1.413
summary	As digital technology advances, multiple ways of repre-senting objects interactively in space, architects and designers begin to use Virtual Reality (VR) and Immersive Digital Environ-ments (IDE) to communicate their ideas. However, these technolo-gies are bounded with their spatial limitations. In responding to this issue, our paper introduces ReShape, a digital-physical spatial representation system supported by Unmanned Aerial Vehicle (UAV) swarm technology that allows a user to project their unbuilt design and interact with them in real space, unattached by headset, fixed cameras or screen. ReShape can be controlled by user orien-tation and gesture as an input, where the real-time feedback is provided by UAV spatial arrangement in space, augmented by computational simulation. Spatial data is transmitted between the UAV agents for the user to experience the digital model, creating a versatile and computationally efficient platform to edit and en-hance the design in real-space. This paper outlines four systems in ReShape, i.e., (1) detection system to identify and locate the user position and orientation; (2) task-arrangement system to provide spatial information to the UAV agents; (3) UAV's communicating system to control the UAV position and task in space; and (4) Physical-Digital forming system, to project digital simulation by the UAV agents.
keywords	UAV system; Spatial representation; a detecting sys-tem; human-computation interaction
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2012_041
id	caadria2012_041
authors	Lin, Yifeng and Shanshan Shen
year	2012
title	Designing a performance-oriented house envelope based on a parametric approach: An integrated method
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 507–516
doi	https://doi.org/10.52842/conf.caadria.2012.507
summary	Conventional house envelope design methods often generate few alternatives related to meeting living comfort and building environmental requirements. However, these design methods are increasingly facing difficulties in following the dynamic climate change and advanced building performance conditions in the early stage of the design process. This paper attempts to introduce an integrated method for designing a performance-orientated house envelope in New Zealand which adopts the parametric approach. This approach can guide and assist designers to make a well-informed decision, which can satisfy both aesthetics and energy performance, and gain more efficiency for the design process in the early stage of housing performance simulation.
keywords	Performance-oriented house envelope design; integrated parametric design; dynamic approach
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2024_438
id	caadria2024_438
authors	Lin, Ying and Ye, Fei
year	2024
title	Architectural Generative Model Evaluation Methods: Image Quality Assessment Metrics and Expert-Based Approach
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 1, pp. 79–88
doi	https://doi.org/10.52842/conf.caadria.2024.1.079
summary	The feasibility of using machine learning methods to generative architectural design solutions has been widely recognized as an effective in enhancing innovation, diversity, and efficiency of solutions. However, in generative design methods, the accuracy and quality of design results often rely on empirical evaluation of expert, which is challenging to evaluate and quantify by unified standards. This paper proposes a comprehensive method for evaluating model performance in architectural design tasks. The evaluation is based on computational criteria (i.e., FID, IS, SIMM indicators) and expert system criteria. The computational metrics will measure the distance, diversity, and similarity between the feature vectors of the real image and the generated image. In contrast, the expert criteria will measure the accuracy, intentionality, and rationality of the layout scheme. This study applies this framework to evaluate three widely used generative models in architectural design: GANs, Diffusion Models, and VAE. The framework also guides the optimization of generative models in architectural applications and assists architects in validating generative outcomes with more efficient workflows.
keywords	Artificial Intelligence, Architectural, Generative Design Methods, Model Evaluation
series	CAADRIA
email
last changed	2024/11/17 22:05

_id	ecaade2022_324
id	ecaade2022_324
authors	Lin, Yu-Ting and Hsu, Pei-Hsien
year	2022
title	Dynamic Inflatable Structures and Digital Fabrication Process
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 311–320
doi	https://doi.org/10.52842/conf.ecaade.2022.1.311
summary	Inflatable structures made of flat film materials have an advantage of low cost, lightweight and rapid deployment, but the variation of their forms is relatively limited, and it is a challenge to produce pneumatic deformations. This paper proposes a designing and manufacturing process of inflatable structures which are made of flat film materials and are able to perform dynamic movements. The process includes steps in which a target 3D surface is produced through programmed 2D paths heat-sealed on flat films of different thickness, leading to a structure composed of air chambers. A parametric modelling procedure and associated principles are developed for the relationship between the forms of a flat-film-based inflatable structure and the heat sealing patterns on the film. A system of double-layer air chambers was designed to control the direction of bending movements. In addition, the form variation of a designed inflatable structure can be achieved by a parametric design process described in this paper.
keywords	Pneumatic Structural System, Inflatable Structure, Digital Fabrication, Design Tool, Kinetic Structure
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2018_210
id	caadria2018_210
authors	Lin, Yuqiong, Zheng, Jingyun, Yao, Jiawei and Yuan, Philip F.
year	2018
title	Research on Physical Wind Tunnel and Dynamic Model Based Building Morphology Generation Method
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 165-174
doi	https://doi.org/10.52842/conf.caadria.2018.2.165
summary	The change of the building morphology directly affects the surrounding environment, while the evaluation of these environment data becomes the main basis for the genetic iterations of the building morphology. Indeed, due to the complexity of the outdoor natural ventilation, multiple factors in the site could be the main reasons for the change of air flow. Thus, the architect is suggested to take the wind environment as the main morphology generation factor in the early stage of the building design. Based on the research results of 2017 DigitalFUTURE Wind Tunnel Visualization Workshop, a novel self-form-finding method in design infancy has been proposed. This method uses Arduino to carry out the dynamic design of the building model, which can not only connect the sensor to monitor the wind environment data, but also contribute the building model to correlate with the wind environment data in real time. The integration of the Arduino platform and the physical wind tunnel can create the possibility of continuous and real-time physical changes, data collection and wind environment simulation, using quantitative environmental factors to control building morphology, and finally achieve the harmony among the building, environment and human.
keywords	Physical wind tunnel; dynamic model; building morphology generation; environmental performance design; wind environment visualization
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2019_025
id	cf2019_025
authors	Lin, Yuqiong; Chenyu Huang ,Yuqiong Lin and Philip F. Yuan
year	2019
title	High-rise Building Group Morphology Generation Approach based on Wind Environmental Performance
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 185
summary	In the urbanization process, high-rise is favored and popularized? while results to the high-density urban space which aggravated the deterioration of urban wind environment. Using quantifiable environmental factors to control the building, is promoting a more meaningful group formation of the sustainable high-rise buildings. Thus, taking wind performance into account in high-rise design infancy is essential. According to the achievement of CAADRIA2018 “SELF-FORM-FINDING WIND TUNNEL TO ENVIRONMENTAL-PERFORMANCE URBAN AND BUILDING DESIGN” workshop, a preliminary set related to the environmental performance urban morphology generation system and method was constructed. In this study, various of high-rise building forms that might be conducive to urban ventilation were selected, such as “hollow-out”, “twisting”, “façade retracting” and “liftup”, to design the Dynamic Model System with multi-dimensional motion.
keywords	High-rise, group morphology, wind tunnel, dynamic models, environmental performance
series	CAAD Futures
email
last changed	2019/07/29 14:15

_id	caadria2023_192
id	caadria2023_192
authors	Lin, Zhichao, Yin, Shi, Liao, Wei and Xiao, Yiqiang
year	2023
title	Genetic Algorithm-Based Building Geometric Opening Configurations Optimization for Enhancing Ventilation Performance in the High-Density Urban District
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 251–260
doi	https://doi.org/10.52842/conf.caadria.2023.1.251
summary	The quality of the outdoor environment relates to urban ventilation performance. Poor wind conditions in high-density urban districts may lead to severe air pollution and deteriorate outdoor thermal comfort. The increase of openings in building geometry is one of the effective passive design strategies for enhancing the porosity of urban morphology and benefitting urban ventilation. However, the outdoor wind environment correlates with the opening configurations of building geometry complicatedly. For seeking the optimal opening configurations, a decision support tool is urgently needed. Our study proposes a genetic algorithm-based optimization workflow for the opening configurations of building geometry design by integrating Computational Fluid Dynamics simulation and parametric design. A residential block in Shenzhen, China is chosen as an example to show this workflow. The results demonstrate that when the porosity is 15%, the pedestrian-level mean wind speed, the wind speed dispersion, and the pressure difference between the front and rear of the downstream building can be optimized by 20.00%, 19.35%, and 183.33% on maximum. When the porosity is increased to 30%, these values are 42.22%, 16.13%, and 483.33%. The resultant opening distribution probability maps can support building design at an early stage to achieve a comfortable urban environment.
keywords	Urban Ventilation, Building Openings, Building Porosity, Genetic Algorithm Optimization, Computational Fluid Dynamics
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ddss2006-pb-153
id	DDSS2006-PB-153
authors	Linda Ma, Theo Arentze, Aloys Borgers, and Harry Timmermans
year	2006
title	A Multi-Agent Model for Generating Local Land-Use Plans in the Context of an Urban Planning Support System
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 153-168
summary	In a multi-player urban planning process, the outcome of any individual decision of the actors is uncertain until a state where the plan is satisfactory for all. To support the plan generation phase, this paper develops a generic multi-agent system, in which agents represent particular land-uses. In the system, agents higher in the hierarchy have priority over agents lower in the hierarchy to claim units of land. This one-direction claim process may result in a plan that is not optimal for every agent. The system, therefore, allows agents to revise their plans in an iterative procedure. A case study illustrates centralized, semi-centralized and decentralized solutions for a plan area based on the outcomes of different strategies used by facility agents (retail, green, schools) and a housing agent. The results show that the proposed system is able to generate rational and realistic plan alternatives for new residential areas.
keywords	Multi-agent system, Planning support system, Plan alternative, Land use planning
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2004_d-209
id	ddss2004_d-209
authors	Lindekens, J. and A. Heylighen
year	2004
title	Re-Using Re-Design Knowledge
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 209-224
summary	Addressing the issue of building re-use, this paper reports on the development of a re-design tool, which aims at helping students and novices (and even experienced architects) in understanding design decisions that have steered existing re-design projects. Furthermore the tool tries to support designers in using this understanding in their own design projects. The paper starts by situating the re-design tool within the overall research setup, and continues by motivating the observations that have led to developing this tool. The core of the paper describes the re-design tool itself and illustrates it with a concrete example. Finally, the tool is framed within the wider context of (architectural) design research, so as to explore where the tool accords or collides with generally accepted design theories.
keywords	Design Process, Design Method, Design Strategy, Re-Design, Design Tool
series	DDSS
last changed	2004/07/03 22:13

_id	c70a
authors	Lindgren, Christina Axelsson
year	1988
title	Forest Visual Variation as a Recreative Force
source	Knowledge-Based Design in Architecture, Tips-88 (pre-proceedings) (1988 : Otaniemi). editors. John S Gero and T. Oksala. Espoo, Finland: Research Institute for Built Environment, Helsinki University of Technology, Department of Architecture, pp. 149-157. includes bibliography.
summary	--- A revised version of this paper has been published in the Acta Polytechnica Scandinavica series. The article presents some findings concerning the importance of forest visual variation and the possibilities to create a Forest Visual Opportunity Spectrum. In the light of suggestions on theory of recreation and of the actual multiple use planning situation of forests, the possibilities and limits of empirical studies as a tool to receive knowledge of visual aspects of forests are discussed
keywords	planning, knowledge, applications, landscape
series	CADline
last changed	1999/02/12 15:09

_id	ecaade2021_058
id	ecaade2021_058
authors	Lindner, Clemens, Langenhan, Christoph, Petzold, Frank, Schneider-Brachert, Wulf, Holzmann, Thomas, Rath, Anca and Widbiller, Matthias
year	2021
title	A Software Concept for Assessing the Risk of Infection in Enclosed Spaces - Exemplified by the COVID-19 pandemic
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2021.2.021
summary	The COVID-19 pandemic has immense impact on our daily life. Precautions like facemasks and social distancing restrict the economy as well as the social life. The aim of the bachelor project was to support architects by integrating health specifications into a software environment and automatically derive specific design support by analyzing architecture. This interdisciplinary project combined architectural and medical expertise to determine the risk of SARS-CoV-2-infection in enclosed spaces by a software approach on basis of parameters provided by the Max Planck Institute for Chemistry (Mainz, Germany) and the Association of German Engineers. Subsequently, calculated risks were evaluated by hygiene experts and summarized in a traffic light scheme, which is clearly intelligible and thus allows simple use. Furthermore, the software concept provides instructions for action for architects and specialists in the field of infection control and suggests architectural tools to minimize the risk of infection. The developed concept can be applied to an existing building and contribute to the planning of new buildings.
keywords	Building Information Modelling; Parametric Design; Design Support; COVID-19
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia06_190
id	acadia06_190
authors	Lindquist, Mark
year	2006
title	Web Based Collaboration (for Free) Using Wikis in Design Studios
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 190-199
doi	https://doi.org/10.52842/conf.acadia.2006.190
summary	This paper presents a case study of the use of Wikis by students in a landscape architecture design studio to evaluate the suitability of Wikis for enhancing student collaboration in the site analysis and preliminary design stage of a project. It was anticipated that using Wikis to facilitate collaboration would provide alternatives to conventional peer to peer collaboration. In addition, Wikis could enhance feedback between the course coordinator and students. The Wiki was used to collect, compile and present data for the purpose of a precedent study of cultural and physical analysis of a site in New Zealand, for which the technology proved successful. The Wiki was less successful in contributing to the collaborative preliminary design of the project. The following discussion and presentation will include the evaluation of online Wiki services, the process used in the design studio, strengths and weaknesses observed, and opportunities for future research.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	ec37
authors	Lindsey, Bruce and Rosenblatt, Paul
year	1993
title	Cutting Up Time: Craft and Technology in the Niches Project
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 523-541
summary	In this paper, which will cite as illustrations some of the documents that have resulted in the completion of the Carnegie Mellon University College of Fine Arts Niches, we will discuss the interdependent relationship between craft and technology in architectural computer modeling practice. We will suggest that practical uses of the computer demand the counterbalancing intimacy of craft in the design studio. Our goal in the Niches Project was to couple direct tactile experience, historical knowledge, and the precise operations afforded by computers.
keywords	Trends in Practice, CAD, CAD/CAM, Stonecarving, Architectural Design, Technology, Craft
series	CAAD Futures
last changed	1999/04/07 12:03

_id	sigradi2011_145
id	sigradi2011_145
authors	Linhares, Bruna; Alarcão, Helena; Carvão, Luís; Toste, Pedro; Paio, Alexandra
year	2011
title	Using Shape Grammar to design ready-made housing for humanized living. Towards a parametric-typological design tool
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 78-81
summary	The research described in this paper is part of a larger on-going project called "Emerg.cities4all" that proposes a generative computer-aided planning system for housing for low-income populations using shape grammars. This paper presents the preliminary research results of a group of four master students who proposed to develop a grammar of ready-made housing for humanized living based in three informal settlements case studies. The results of this research are based on the assumption that it is possible to generate modular, adaptable and affordable ready-made housing for humanized living solutions design, supported by a computational generation tool.
keywords	Shape grammars; emergent housing; housing design; CPLP
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	3e01
authors	Linnert, C., Encarnacao, M., Storck, A. and Koch, V.
year	2000
title	Virtual Building Lifecycle - Giving architects access to the future of buildings by visualizing lifecycle data
source	ICCCBE8, Stanford, August 2000
summary	Today’s software for architects and civil engineers is lacking support for the evaluation and improvement of building lifecycles. Facility Management Systems and 4D-CAD try to integrate lifecycle data and make them better accessible, but miss the investigation of the development of the structure itself. Much money is inappropriately spent when materials with different life expectancies are combined in the wrong way and building parts are repaired or replaced too early or too late. With the methods of scientific visualization and real-time 3Dgraphics these deficiencies can be eliminated. The project “Virtual Building Lifecycle” (short VBLC, [W-VBLC]) connects 3D geometrical information to research data such as life expectancy and emissions and to standard database information like prices. The automated visualization of critical points of the structure in the past, presence and future is a huge advantage and helps engineers to improve the duration of the lifecycle and reduce the costs.
keywords	Visualization; lifecycle; virtual building; realtime 3D graphics; architectural database; 4D-CAD; Facility Management
series	other
email
last changed	2003/02/26 18:58

_id	sigradi2009_955
id	sigradi2009_955
authors	Lino, Sulamita Fonseca; Clarisse Martins Vilella; Cezar Augusto Figueredo
year	2009
title	Architecture without ‘a form of use’ [Architecture without "a form of use"]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The objective of this paper is to present the methodology used in the Computer graphics applied to architecture class, its potentialities and limitations, and preliminary conclusions. The premises of the course were: to discuss the relation between the architect and the users of architecture, considering that the spaces of the architecture must be projected without “a form of use”, and to teacher the students in the use of software being aimed at the elaboration of spaces in flexible form.
keywords	Architecture; users; flexibility
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	0ddb
authors	Linzer, H., Schmidinger, E., Voigt, A. and Walchhofer, H.P.
year	1995
title	Computer Integrated Building-up Planning (CIBP)
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 259-265
summary	Building-up planning holds a prominent position within the planning- and realization process due to its closeness to the constructional-spatial translation. Based on spatial analysis, spatial characteristics and the elaboration of marginal conditions of spatial development within the framework of building-up planning, building volumina, building density, manner of building-up and storeyheights amongst others are to be defined and analyzed as to their spatial impact prior to their realization. The present project has presented possibilities for improvement of planning quality as well as of optimizing clearness and comprehension of the legally binding marginal conditions of building-up planning. Based on the wording of the Austrian Law governing Area Planning building-up planning constitutes an integral part of Urban and Regional planning. Building-up planning is the planning instrument considered right next to putting into reality the effects of which becoming immediately visible in the constructional transfer of frame conditions of spatial development. As a legal instrument it is - due to its overpacked nature - complicated in its practical application and disposes of only a small degree of flexibility concerning its consequences. Thus, a major goal of the research project aims at the development of a building-up plan of a prohibitory - (mandatory) plan acting as an instrument for designing public space.
series	plCAD
email
last changed	2003/05/17 10:01

_id	2fc4
authors	Linzer, H., Martens, B. and Voigt, A.
year	1994
title	The Integration of Virtual and Full-Scale Modelling
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 147-151
doi	https://doi.org/10.52842/conf.ecaade.1994.147
summary	Practically every design- and planning activity aims at its ultimate realization in the built environment. Any respective decisions are generally taken on the basis of substitutes of the original. Yet, the true spatial dimensions and proportions can be conceived on a 1:1 scale "without any mental detour". Moreover, the interaction of light, colour and material is best represented in the 1:1 model. One of the main reasons why physical 1:1 models are rarely constructed is certainly the unbalanced economic relation between expenditure and resulting use. Therefore, representation by means of less expensive virtual models has taken a preeminent position. However, a balanced combination of physical and virtual models in full-scale according to area- and problem-type, degree of details and scale is likely to become increasingly important in the future. It is not the aim of Simulation Aided Architectural Design (SAAD) and Simulation Aided City Development (SACD) to do completely away with existing working procedures and planning techniques, but to act supplements promoting the integration of traditional and new simulation techniques by an-ticipating "realities" aimed at the best-suited design of a common living space. Furthermore, the generation of visions and utopian schemes may add to an enhancement as far as spatial development and design are regarded within the issue of falsification and verification of spatial developments.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/
last changed	2022/06/07 07:59

For more results click below: