Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 16853

Reformat results as: short short into frame detailed detailed into frame

_id	ebcc
authors	Kolb, David A.
year	1984
title	Experiential Learning
source	Prentice Hall
summary	In his book Experiential Learning: Experience as the Source of Learning and Development (1984), David Kolb introduces his experiential learning theory and provides a model for its application in schools, organizations, and virtually anywhere people are gathered together. Kolb's comprehensive and practical theory builds on the rich foundations of experience-based learning provided by John Dewey, Kurt Lewin, and Jean Piaget. We first consider the roots of his theory following which we offer a summary of it in practice.
series	other
last changed	2003/04/23 15:14

_id	ecaade2015_84
id	ecaade2015_84
authors	Kontovourkis, Odysseas and Tryfonos, George
year	2015
title	Robotic Fabrication of Tensile Mesh Structures and Real Time Response - The Development and Simulation of a Custom-Made End Effector Tool
doi	https://doi.org/10.52842/conf.ecaade.2015.2.389
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 389-398
summary	This paper presents an ongoing research, aiming to introduce a fabrication procedure for the development of tensile mesh systems. The purpose of this methodology is to be implemented in real time, based on a feedback loop logic cyclically iterated between robotic machine control and elastic material behaviour. Our purpose is to extend the capacity of robotically driven mechanisms to the fabrication of complex tensile structures and at the same time, reduce the defects that might occur due to the deformation of the elastic material. In this paper, emphasis is given to the development of a custom-made end effector tool, which is responsible to add elastic threads and create connections in the form of nodes. Based on additive fabrication logic, this process suggests the real time development of physical prototypes through the increasing smoothness of mesh structures.
wos	WOS:000372316000045
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2021_244
id	ecaade2021_244
authors	Kontovourkis, Odysseas and Tryfonos, George
year	2021
title	A Hybrid Robotic Construction Approach in Large Scale - The example of a tree-like timber branching structure development
doi	https://doi.org/10.52842/conf.ecaade.2021.2.189
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 189-198
summary	This paper demonstrates an integrated approach for the development of a complex timber structure through a hybrid model of robotic and conventional construction. Specifically, a tree-like branching structure is parametrically developed and optimized in terms of material waste reduction during robotic cutting of variable structural components in size and angle. Also, the position and angle of joints are determined through robotic marking of wooden components in a continuous robotic workflow. This is followed by their conventional assembly into larger structural elements and then into an overall structure. The physical results are evaluated in terms of cutting and assembly accuracy of wooden parts based on a 3D scanning approach. The results show manufacturing deviations, both in cutting and assembly stages, which are executed by the robot and the carpenters respectively. These results provide useful inputs that enables a more thorough and productive consideration of the application of robotic technology and human involvement in the construction industry.
keywords	Hybrid construction; Tree-like branching structure; Robotic cutting; Manual assembly; Accuracy
series	eCAADe
email
last changed	2022/06/07 07:51

_id	6153
authors	Korbel, Wojciech
year	1996
title	The Present and Future, Development of CAD Exploration in the Office of City’s Architect
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 147-157
summary	The usage of computer as a standard tool for an architect became obvious in the past few years. Late 90's along with their rapid development of technology, followed by the growing amount of computer hardware on the market /constantly better and cheaper at the same time/ caused the big changes in the possibilities of project's presentation. The lack of necessary memory to perform proper calculations for high quality rendered images no longer exists. The question raised most commonly by all leading computer software producers concerns the amount of time in which those calculations can be carried out. The race continues while once again, the price of already existing hardware drops rapidly. All these facts make computer more accessible for a potential user such as an architect. Additionally CAD programmers try to make programs as friendly as possible, reducing constantly the amount of time required to learn the program, at least at its bases. As the result, in the next few years, computer may become a standard, at least in some ways of project's presentation. Once again we may face the problem, when the everyday life goes far beyond the expectations. The question appears, how can all kinds of architectural authorities be prepared for constant changes in this field.
series	plCAD
last changed	1999/04/09 15:30

_id	6ab7
authors	Korson, Tim and McGregor, John D.
year	1990
title	Understanding Object- Oriented : A Unifying Paradigm
source	Communications of the ACM September, 1990. vol. 33: pp. 40-60. includes bibliography.
summary	The purpose of this paper is to introduce terminology, concepts and basic techniques surrounding the object-oriented paradigm. software / OOPS / programming. 63. Koskela, Lauri, Raija Hynynen and Martti Kallavuo, et al. 'Expert Systems in Construction - Initial Experiences.' CAD and Robotics in Architecture and Construction, Proceedings of the International Joint Conference = CAO et Robotique en Architecture et B.T.P. Actes des Journees Internationales. June, 1986. Paris: Hermes, pp. 167-176. includes bibliography and abstracts in French and English. This paper describes development of expert systems for construction applications in the Laboratory of Building Economics of the Technical Research Centre of Finland. Five small expert systems are described. Experiences gained in the development work are evaluated. The future significance of expert systems for the construction industry is discussed, and an approach towards expert systems to be adopted by organizations in the construction industry is suggested
keywords	construction, applications, economics, expert systems, knowledge, evaluation, analysis
series	CADline
last changed	2003/06/02 10:24

_id	2d77
authors	Korte, Michael
year	1991
title	CASOB - Simultaneous Surveying and Drawing
doi	https://doi.org/10.52842/conf.ecaade.1991.x.t7p
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	Accurate planning and economical building within an existing structure require a complex building analysis based upon detailed scale plans. Work has shown unsatisfactory of measuring tools: (1.) Recording of measurements with meterrule and measuring tape often results in mistakes and wasted time. Since the data is not digitalized the measurements cannot be used by a CAD system. (2.) Commercially available CAD software is made only for new planning but not for planning with an existing structure. Up till now architects who predominantly work with existing structures were not able to take advantage of products in the software- and hardware market which would satisfy their needs. The problems already begin with the search for appropriate tools for the surveying of existing structures and the simplest possible transfer of the data to a CAD System. There is an increased demand for quality surveying of existing structures. In Germany, far more than 60 % of all construction planning is related to existing structures. Due to the special situation in the five new states this percentage will grow significantly. Other countries will find themselves in a similar situation. A large number of precise and analytical surveys of existing structures will be needed in a relative short time. Time pressure and stress factors at construction sites call for quality planning and economical construction which can only be accomplished with reliable and exact surveying of structures. Frustrating experiences in the field have led me to develop systems for the surveying of existing structures. With CASOB (Computer Aided Surveying of Buildings) we have a tool today that simultaneously surveys and creates a CAD compatible drawing.
series	eCAADe
last changed	2022/06/07 07:50

_id	ecaade2013_072
id	ecaade2013_072
authors	Kos, Jose Ripper; Angeloni, Guilherme and Brito, Thiago Mello
year	2013
title	Connecting Dwellers to Building Performance and Weather Data through Sustainable Automation Systems
doi	https://doi.org/10.52842/conf.ecaade.2013.1.157
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 157-165
summary	The paper presents a prototype for a Home Automation and Information Systems (HAIS) applied to an existing dwelling, the Florianopolis House, with the potential to address building performance and user behavior towards a more sustainable way of living. Home information and automation systems based on a great variety of sensors, associated with local weather stations and climate forecast databases can significantly impact the construction of more sustainable habits in home dwellers. Monitoring the weather variations, building’s performance and the impact each resident’s activity in energy and water consumption is a powerful tool for the dwellers’ awareness and can provide a significant impact on residents’ reconnection with the natural cycles. The development of the graphic interface is highlighted as a critical issue for the communication of building performance, weather data and actuators control.
wos	WOS:000340635300015
keywords	Home automation system; user behavior; weather data; graphic interface; building performance.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac20031305
id	ijac20031305
authors	Kos, José R.
year	2003
title	3D models of urban icons: tracing Benjamin and Koolhaas
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	Walter Benjamin and Rem Koolhaas developed two significant investigations, which explored the culture of Paris and New York through the analysis of their architectural artifacts. Their research projects successfully construct, from a few meaningful components of the built environment, an understanding of the overall city and its society. The objective of this paper is to address the similarities between the research carried out at the Federal University of Rio de Janeiro and the work of these two acclaimed writers. Our group aims to select urban icons, from different moments and areas in Rio de Janeiro, to be studied in order to understand the city evolution in the 20th Century. The distinguished Ministry of Education building is the investigation's prototype, analyzed thorough several 3D models and other digital techniques. We conclude that a thorough study of Benjamin's and Koolhaas' work should be considered a primary support for the interrogation of our own investigation.
series	journal
type	normal paper
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	687c
authors	Kosco, Igor
year	1999
title	How the World Became Smaller
doi	https://doi.org/10.52842/conf.ecaade.1999.230
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 230-237
summary	The world of computers became fruitful and independent before the new millennium started. New technologies and methods are giving us new tools and possibilities every day as well as the challenge how to use them. The advantage of architecture and namely of architects teaching at the universities or schools is remarkable: new techniques reflect the education, research and practice - and what is important - by one person. The links between practice and university from the point of view: how the computer technologies and CAAD influences methods of designing, managing and collaboration are very important in both directions. It grows with the number of students who left university with good computer skills on one side and number of architectural and engineering offices using computers on the other. Networks and Internet enables to exchange data but also experiences. Internet itself is not only a tool for surfing and enjoying or the source of information, but preferably like a powerful tool for collaboration, workgroups, virtual studios or long distance education. This paper describes experiences from research and educational projects between Slovak Technical University, IUG Grenoble, University of Newcastle and others and their influence on architectural education and practice.
keywords	Long-Distance Education, Research, Practice
series	eCAADe
email
last changed	2022/06/07 07:51

_id	40d5
authors	Koskenniemi, Outi
year	2003
title	Information systems for monitoring land use planning in the Finnish Environmental Administration. GISALU (Land Use GIS) and KATSE (the Information System for Monitoring Land Use Planning)
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The primary aim of the monitoring of land use planning is to obtain information about the state and development of land use planning. The new Land Use and Building Act of Finland has obliged the authorities to monitor land use since the beginning of the year 2000. Two information systems help to fulfil this task in the Finnish Environmental Administration. GISALU (Land Use GIS) is a collection of data sets containing geographical data on land use plans, deviation decisions and the cultural environment. KATSE(the Information System for Monitoring Land Use Planning) mainly contains statistical data on the state of planning as a whole and changes in it. GISALU is an important information source for KATSE. Both information systems form part of ALUTJ (the information systems for land use), and they are also subsystems of HERTTA (the Finnish Environmental Information System).
series	other
email
last changed	2003/03/11 20:39

_id	ecaade2008_019
id	ecaade2008_019
authors	Koutamanis , Alexander
year	2008
title	Recognition of Building Elements in Free-Hand Sketches
doi	https://doi.org/10.52842/conf.ecaade.2008.419
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 419-426
summary	The paper presents a framework for the recognition of free-hand sketches based on spatial and temporal information that permits identification of strokes, grouping of strokes into graphic symbols and recognition of depictions of building elements in the graphic symbols. It proposes that the symbols involved in 2D projections are generally small and manageable despite the vagueness and multiple layering of sketches.
keywords	Sketching, recognition, building elements, representation
series	eCAADe
email
last changed	2022/06/07 07:51

_id	62b9
id	62b9
authors	Koutamanis, A.
year	2010
title	Mobile information processing in architecture and building
source	Multi-Science / ISBN 978-1-907132-17-9
summary	This book outlines the applications of mobile devices such as smartphones and PDAs to architecture and building. It offers an overview of the possibilities and limitations of what is likely to become a major development in their field. The book addresses general use issues as well as specifically architectural applications - sketching, CAD, and project management. There is a critical overview of the reasons why one might use mobile devices for each specific purpose; of the possibilities and limitations of these devices; of the skills and facilities required for using them effectively and efficiently; and of the relation between mobile applications and general computerization in architectural practice (in terms of both technology and organisation).
series	book
type	normal paper
email
more	http://www.multi-science.co.uk/mobile-info.htm
last changed	2011/04/21 07:30

_id	ijac20032101
id	ijac20032101
authors	Koutamanis, Alexander
year	2004
title	CAAD's Seven Arguable Virtues
source	International Journal of Architectural Computing vol. 2 - no. 1
summary	In 1995 Maver proposed seven deadly sins for CAAD as the prelude to a critical discussion on the principles, methods and practices of the field. In an attempt to return to this discussion, in this paper these sins are linked to the seven deadly sins and the complementary seven heavenly virtues. The analysis of computational processes into a theoretic, an algorithmic and an implementational framework provides a framework for the positioning of sins and possible or already attained virtues in CAAD.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade2007_039
id	ecaade2007_039
authors	Koutamanis, Alexander
year	2007
title	Matching Representation to Perception
doi	https://doi.org/10.52842/conf.ecaade.2007.551
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 551-558
summary	Visual representations play an important role in mobile architectural guides, especially with respect to the identification of buildings, i.e. matching internal representations to external ones (the documentation in the guide) and the perceived scene. By restructuring this documentation into networks of significant architectural entities and features a guide is enriched with flexible, economical means for supporting building identification under the typically variable conditions architectural travelers have to endure.
keywords	Mobile computing, architectural guide, representation, perception, recognition
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac20108208
id	ijac20108208
authors	Koutamanis, Alexander
year	2010
title	W.J. Mitchell - In Celebration of An Approach
source	International Journal of Architectural Computing vol. 8 - no. 2, 223-231
summary	Among the founding fathers of architectural computing, the late W.J. Mitchell was arguably the one who managed to capture the imagination of the younger generations through overviews and insights that described the backgrounds and scope of the area in a way that was suitable for novices as well as people outside the area. Calling such overviews successful popularization is only part of the truth. More importantly, they formulate a coherent and comprehensive approach that allowed Mitchell to move between eras and contexts without loosing focus or sacrificing fundamental priorities. It is an approach that remains valid and usable, a source of inspiration and understanding for future generations in the area.
series	journal
last changed	2019/05/24 09:55

_id	2961
id	2961
authors	KOUZELEAS Stelios
year	2004
title	COMPUTATIONAL PROCESSES OF A HALL CAD MODELISATION FOR ACOUSTIC SIMULATION ACCORDING TO ACCEPTED GEOMETRY FORMAT VIA ACOUSTIC SOFTWARE
source	1st International Conference “From Scientific Computing to Computational Engineering” (IC-SCCE), 8-10 September 2004, Athens, Greece
summary	The acoustic computational simulation presents many advantages but at the same time there are some limits corresponding, among others, to the modelisation of the hall geometry. The integrated modelers of geometry of the halls in the acoustic simulation software are based especially on the programming code modelisation via text editors of coordinate points and not on the graphical modelisation, as the CAD software is. In cases of complex architectural shapes of halls, the majority of the acoustic simulation software imperatively needs to import a model from a CAD software. However, the modelisation of the geometry of the hall must take into account several criteria in order to run in an acoustic simulation software, and optimize the calculation results, such as the plane surfaces, the limited number of surfaces in some cases, the elimination of the unnecessary elements, the accepted geometry model format, etc. This paper explains the description and the particularities of three different modelisation processes of the Architectural School Amphitheater of Bordeaux in a CAD system in order to be adequate for acoustic simulation via acoustic software, such as ASCII, dxf and normals orientation model formats. It also presents computer automatization aspects of these processes integrated in a plate-form adaptable to a CAD system named “CAD-Acoustic.” These modelisation processes can also be a helpful tool during the architectural conception of the acoustic hall.
keywords	CAD modelisation process, Architectural acoustics, Acoustic simulation
series	other
type	normal paper
email
more	http://ic-scce.upatras.gr/
last changed	2005/10/25 09:47

_id	diss_kouzeleas
id	diss_kouzeleas
authors	Kouzeleas, S.
year	2002
title	DEVELOPMENT OF A HELP TOOL IN ARCHITECTURAL ACOUSTICS SIMULATION ADAPTABLE IN A MODELISATION CAD SYSTEM
source	Ph.D. Thesis, Order number 2642, University of Bordeaux 1, 2002, France
summary	The aim of the proposed research in this thesis is the rapprochement of the acoustical conception and simulation with the architectural conception in order to give the architect the means to appreciate and evaluate the acoustical results, facilitate his collaboration with the acoustician, and, finally, allow him to have a help base during his architectural conception for acoustical simulation. This is proposed by the realisation of a plate-form of help adaptable to an architectural modelisation C.A.D. program, integrating acoustical calculate motors, graphical modules and research developed. This research concerns the definition of different processes of modelisation and simplification of architectural models for acoustical simulation, the translation of the acoustical results in an architectural way, the integration of an architectural approach to the acoustical conception, and an acoustical integrated multimedia database.
keywords	architectural acoustics, acoustics simulation, acoustics conception, architectural
series	thesis:PhD
type	normal paper
email
last changed	2005/10/17 21:57

_id	ecaade2015_140
id	ecaade2015_140
authors	Kowal, Slawomir; Koszewski, Krzysztof, Slyk, Jan and Wrona, Stefan
year	2015
title	Parametric Methods in Reconstruction of the Medieval Proto-Town in Pultusk, Poland
doi	https://doi.org/10.52842/conf.ecaade.2015.1.695
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 695-700
summary	This paper describes methods, processes and the outcome of the reconstruction in the medieval wooden settlement complex in Pultusk, Poland. It is the result of the interdisciplinary cooperation between architects from Warsaw University of Technology and archaeologists from Regional Museum of Pultusk. They have undertaken the research issues of information exchange and knowledge-building processes in the digital environment. Main issues were related to the methods of computer reconstruction in architectural and urban scale, which enable alternative narrative threads. To achieve this, parametric techniques were adopted and the 'Pultusk Recontructor' application was developed in Grasshopper. The interaction between architects and archaeologists over hypotheses and alternatives was supported in urban scale by 'Rapid Reconstruction Modular Model'. This 3D printed urban model, consist of segments which can be simultaneously exchanged. It became not only a substrate for scientific debate, but also may serve an education role for the permanent Museum exhibition.
wos	WOS:000372317300075
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=21013e32-702a-11e5-99b6-d34246563b4e
last changed	2022/06/07 07:51

_id	65c4
authors	Kozma, R.B.
year	1993
title	Will Media Influence Learning? Reframing the Debate
source	Educational Technology Research and Development (1):1-31
summary	This article addresses the position taken by Clark that media do not influence learning under any conditions. The article reframes the questions raised by Clark to explore the conditions under which media will influence learning. Specifically, it posits the need to consider the capabilities of media, and the methods that employ them, as they interact with the cognitive and social processes by which knowledge is constructed. This approach is examined within the context of two major media-based projects, one which uses computers and the other video. The article discusses the implications of this approach for media theory, research, and practice.
series	other
last changed	2003/04/23 15:14

_id	sigradi2023_55
id	sigradi2023_55
authors	Koçer Özgün, Feyza Nur and Alaçam, Sema
year	2023
title	Understanding the User Interfaces Through Spatial Metaphors
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1573–1584
summary	This study focuses on spatial metaphors in digital interfaces that designers use in their modeling processes. When designers themselves perform an action by using a digital tool, they often make spatial inferences without realizing it, with the help of their mental models and established modeling experiences. In order to trace these implicit spatial metaphors, the spatial metaphors used by the designers were discussed through their verbal expressions. Within the scope of the pilot case study, the participants told each other the 3D models given to them verbally, and the other participant made the 3D model simultaneously with the narrative. The metaphors that the participant in the role of the narrator used with the intention of making a spatial description allowed the participant in the role of the modeler to build spatial relations. This study, which has the potential to provide a spatial framework for interfaces in the future, is a step toward designing new user interface metaphors.
keywords	Spatial metaphors, User interface, UI metaphors, Modeling process, Human-computer interaction
series	SIGraDi
email
last changed	2024/03/08 14:09

For more results click below: