Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 218

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_370
id	ecaade2018_370
authors	Abdelmohsen, Sherif, Massoud, Passaint, El-Dabaa, Rana, Ibrahim, Aly and Mokbel, Tasbeh
year	2018
title	A Computational Method for Tracking the Hygroscopic Motion of Wood to develop Adaptive Architectural Skins
doi	https://doi.org/10.52842/conf.ecaade.2018.2.253
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 253-262
summary	Low-cost programmable materials such as wood have been utilized to replace mechanical actuators of adaptive architectural skins. Although research investigated ways to understand the hygroscopic response of wood to variations in humidity levels, there are still no clear methods developed to track and analyze such response. This paper introduces a computational method to analyze, track and store the hygroscopic response of wood through image analysis and continuous tracking of angular measurements in relation to time. This is done through a computational closed loop that links the smart material interface (SMI) representing hygroscopic response with a digital and tangible interface comprising a Flex sensor, Arduino kit, and FireFly plugin. Results show no significant difference between the proposed sensing mechanism and conventional image analysis tracking systems. Using the described method, acquiring real-time data can be utilized to develop learning mechanisms and predict the controlled motion of programmable material for adaptive architectural skins.
keywords	Hygroscopic properties of wood; Adaptive architecture; Programmable materials; Real-time tracking
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_138
id	ecaade2018_138
authors	Abdulmawla, Abdulmalik, Schneider, Sven, Bielik, Martin and Koenig, Reinhard
year	2018
title	Integrated Data Analysis for Parametric Design Environment - mineR: a Grasshopper plugin based on R
doi	https://doi.org/10.52842/conf.ecaade.2018.2.319
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 319-326
summary	In this paper we introduce mineR- a tool that integrates statistical data analysis inside the parametric design environment Grasshopper. We first discuss how the integration of statistical data analysis would improve the parametric modelling workflow. Then we present the statistical programming language R. Thereafter, we show how mineR is built to facilitate the use of R in the context of parametric modelling. Using two example cases, we demonstrate the potential of implementing mineR in the context of urban design and analysis. Finally, we discuss the results and possible further developments.
keywords	Statistical Data Analysis; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_172
id	ecaade2018_172
authors	Al-Douri, Firas
year	2018
title	The Employment of Digital Simulation in the Planning Departments in US Cities - How does it affect design and decision-making processes?
doi	https://doi.org/10.52842/conf.ecaade.2018.2.539
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 539-548
summary	The increased interactivity of digital simulation tools has offered a wide range of opportunities that may provoke a paradigmatic shift in urban design practice. Yet, research results did not provide any clear evidence that such shift seems to exist. Further studies are required to examine the methods and impact of their usage on decision-making and design outcome. To that goal, this research uses the single-case study design that has been pursued in three phases: literature review, online survey, and semi-structured interviews. The results have shown inadequacies, inconsistency, and ineffectiveness of usage of the tools that are most appropriate to the design activities of each phase and thus a limited impact on critical areas of the decision-making. The impact of the tools' usage is found to be correlated with not only the extent of their usage, but also with a variety of procedural and substantive factors such as the plan methodology, extent of tool's usage, choice of the appropriate tool, and planners' skills and capabilities in using those tools.
keywords	Urban Simulation ; Urban Design Practice
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_389
id	ecaade2018_389
authors	Algeciras-Rodriguez, Jose
year	2018
title	Stochastic Hybrids - From references to design options through Self-Organizing Maps methodology.
doi	https://doi.org/10.52842/conf.ecaade.2018.1.119
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 119-128
summary	This ongoing research aims to define a general assisted design method to offer non-trivial design options, where form is produced by merging characteristics from initial reference samples collection that serves as an input set. This project explores design processes laying on the use of non-linear procedures and experiments with Self-Organizing Map (SOM), as neural networks algorithms, to generate geometries. All processes are applied to a set of models representing classic sculpture, whose characteristics are encoded by the SOM process. The result of it is a set of new geometry resembling characteristics from the original references. This method produces hybrid forms that acquire characteristics from several input references. The resulting hybrid entities are intended to be non-trivial solutions to specific design situations, so far, at the stage of this research, mainly formal requirements.
keywords	Self-Orgnizing Maps; Cognitive Space; Design Options; Form Finding; Artificial Intelligence
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_162
id	ecaade2018_162
authors	Alkadri, Miktha, Turrin, Michela and Sariyildiz, Sevil
year	2018
title	Toward an Environmental Database - Exploring the material properties from the point cloud data of the existing environment
doi	https://doi.org/10.52842/conf.ecaade.2018.2.263
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 263-270
summary	The utilization of point cloud as a 3D laser scanning product has reached across multi-disciplines in terms of data processing, data visualization, and data analysis. This study particularly investigates further the use of typical attributes of raw point cloud data consisting of XYZ (position information), RGB (colour information) and I (intensity information). By exploring the optical and thermal properties of the given point cloud data, it aims at compensating the material and texture information that is usually remained behind by architects during the conceptual design stage. Calculation of the albedo, emissivity and the reflectance values from the existing context specifically direct the architects to predict the type of materials for the proposed design in order to keep the balance of the surrounding Urban Heat Island (UHI) effect. Therefore, architects can have a comprehensive analysis of the existing context to deal with the microclimate condition before a design decision phase.
keywords	point cloud data; material characteristics; albedo; emissivity; reflectance value
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_201
id	ecaade2014_201
authors	Anetta Kepczynska-Walczak
year	2014
title	Data Integration In A Visual Mode
doi	https://doi.org/10.52842/conf.ecaade.2014.1.565
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 565-572
wos	WOS:000361384700056
summary	The principal aim of the paper is to discuss data integration issues in the context of urban scale studies. A special attention is dedicated to built environment, visual thinking and synthesis of knowledge. The paper is based on literature studies, professional experience and the outcomes of an experimental students' project conducted by the author last year. First, the theoretical background and the current state of research in the area is revealed. Then, the project theme, goals and organisation are described. So, the main idea of the experiment was to explore data collection methods at the urban scale without a design goal since the prime approach was to take into consideration students' perceptions of space and its multifaceted aspects. Thus, to maintain an open mind about gathering such information and not to bias participants towards one approach or another were crucial. Finally, the outcomes of the project are discussed. Students' presentations showed that they used different approaches not only in terms of digital tools but also in terms of their understanding of data integration. The author believes a discussion of the experiment outcomes will contribute to the main theme of the eCAADe 2014 Conference entirely.
keywords	Built environment; visual thinking; data integration
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_167
id	ecaade2018_167
authors	Anton, Ana and Abdelmahgoub, Ahmed
year	2018
title	Ceramic Components - Computational Design for Bespoke Robotic 3D Printing on Curved Support
doi	https://doi.org/10.52842/conf.ecaade.2018.2.071
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 71-78
summary	Additive manufacturing enables the fabrication of affordable customisation of construction elements. This paper presents a computational design method developed for 3D printing of unique interlocking ceramic components, which assemble into segmented columns. The fabrication method is ceramic-paste extrusion, robotically placed on semi-cylindrical molds. Material system and fabrication setup contribute to the development of an integrated generative system which includes overall design, assembly logic and printing tool-path. By contextualizing clay extrusion and identifying challenges in bespoke tool-path generation, this paper discusses detailing opportunities in digital fabrication. Finally, it identifies future directions of research in extrusion-based printing.
keywords	CAAD education; generative design; robotic 3D printing; clay extrusion; curved support
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_124
id	ecaade2018_124
authors	Asanowicz, Aleksander
year	2018
title	Digital Architectural Composition in Virtual Space
doi	https://doi.org/10.52842/conf.ecaade.2018.2.703
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 703-710
summary	The paper is divided into two main parts. The first part refers to the history of attempts to use VR technology in the process of architectural space creation in a dynamic way. The second part presents the experiment carried out at our Faculty, in which we implemented VR in the Digital Architectural Composition course. This experiment was divided into two parts. In the both parts Google Blocks software was used. In the first part we have used the first exercises which was completed by students during the first semester in a traditional way (a cardboard mock-up) and then in the third semester as a digital model in Cinema 4D. It was a Solid form with. In the second part of this experiment we asked students to create a sketch of walk through space and they can created their own shapes in their design. The analysis of the results allows to formulate the thesis that there is a qualitative revolution in the area of human-computer interface. The main conclusion is that Virtual Reality eliminates the boundaries between the spectator and the space and that the idea - Designing Become a Place" is still actual.
keywords	Architectural composition; virtual reality; direct design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_261
id	ecaade2018_261
authors	Austern, Guy, Capeluto, Isaac Guedi and Grobman, Yasha Jacob
year	2018
title	Rationalization and Optimization of Concrete Façade Panels
doi	https://doi.org/10.52842/conf.ecaade.2018.1.727
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 727-734
summary	The presented research develops methods for introducing fabrication constraints into architectural design, a process often referred to as design rationalization. In the first stage of the research, a computational method for evaluating the fabrication potential of geometries was developed. The method predicts the feasibility, material use and machining time of a geometry in relation to different fabrication techniques. It uses geometric properties to mathematically estimate these parameters without simulating the actual machining. The second stage of the research describes processes for adapting architectural designs to their fabrication technique. The evaluation method previously developed is used as a fitness criterion for a computational optimization algorithm aimed at adapting concrete façade elements to the fabrication constraints of their molds. A case study demonstrates how the optimization process succeeded in improving the feasibility of different geometries within a time-frame suitable to the architectural design process, and without significant changes to the initial design.
keywords	Optimization; Digital Fabrication; Rationalization; Computational Design Process
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_309
id	ecaade2018_309
authors	Aºut, Serdar, Eigenraam, Peter and Christidi, Nikoletta
year	2018
title	Re-flex: Responsive Flexible Mold for Computer Aided Intuitive Design and Materialization
doi	https://doi.org/10.52842/conf.ecaade.2018.1.717
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 717-726
summary	The paper presents an ongoing research about the design and a possible use of a responsive flexible mold. The mold is developed by integrating its precedents with automation and Human-Computer Interaction (HCI). The objective of the design is to provide an immersive design tool which has direct link to fabrication. It allows intuitive interaction to its user in order to help with the design and production of complex forms by supporting the designer's implicit skills with computer. The paper presents the design by illustrating the use of the hardware such as the actuators, the sensor and the projector; and by defining the workflow within the software. The paper concludes with the description of a possible use case in which the system is used to design and materialize an object in different scales.
keywords	Design tools development; Digital fabrication and robotics; Human-computer interaction in design; Shape, form and geometry; Inventive Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_w08
id	ecaade2018_w08
authors	Aºut, Serdar, Gouwetor, Friso and Latka, Jerzy
year	2018
title	Form-Adapt - Using Adaptable Form-work for Fabricating Double-Curved Surfaces
doi	https://doi.org/10.52842/conf.ecaade.2018.1.047
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 47-48
summary	This workshop will introduce the use of FlexiMold, an adaptable form-work device for fabricating double-curved surfaces; and Marionette, the parametric design tool of Vectorworks. The participants will have the opportunity to experience the entire workflow from the design to the production of a spatial object which has a complex form. The object will be composed of separate panels each of which will be designed by a participant and will be fabricated by team work.
keywords	Computational Design; Computer Aided Manufacturing; Double-Curved Surfaces
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_219
id	ecaade2018_219
authors	Bai, Nan, Ye, Wenqia, Li, Jianan, Ding, Huichao, Pienaru, Meram-Irina and Bunschoten, Raoul
year	2018
title	Customised Collaborative Urban Design - A Collective User-based Urban Information System through Gaming
doi	https://doi.org/10.52842/conf.ecaade.2018.1.419
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 419-428
summary	As we step into a new data-based information age, it is important to get citizens involved in the whole design process. Our research tries to build up a user-based urban information system by collecting the data of neighborhood land use preference from all the residents through gaming. The result of each individual decision will be displayed in real time using Augmented Reality technology, while the collective decision dataset will be stored, analyzed and learnt by computer, forming an optimal layout that meets the highest demand of the community. A pre-experiment has been conducted in a. an abstract virtual site and b. an existing site by collecting opinions from 122 participants, which shows that the system works well as a new method for collaborative design. This system has the potential to be applied both in realistic planning processes, as a negotiation toolkit, and in virtual urban forming, in the case of computer games or space colonization.
keywords	Collaborative Design; Customization; Urban Design; Gaming; Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_424
id	ecaade2018_424
authors	Barczik, Günter
year	2018
title	From Body Movement to Sculpture to Space - Employing Immersive Technologies to Design with the whole Body
doi	https://doi.org/10.52842/conf.ecaade.2018.2.781
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 781-788
summary	We present and discuss an experimental student design and research project that investigates how architectural design can be enhanced via immersive technologies. Specifically, by employing not a 2D interface for designers' thoughts, but a 3D interface and thereby activating the whole body instead of merely head and hands.
keywords	Virtual Reality; Design Tools; Design Concepts; Design Methods
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_377
id	ecaade2018_377
authors	Beaudry Marchand, Emmanuel, Dorta, Tomás and Pierini, Davide
year	2018
title	Influence of Immersive Contextual Environments on Collaborative Ideation Cognition - Through design conversations, gestures and sketches
doi	https://doi.org/10.52842/conf.ecaade.2018.2.795
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 795-804
summary	In the design studio, Virtual Reality (VR) has mainly been included as a visualization tool to explore pre-designed ideas developed in traditional 3D software or using pen on paper. Meanwhile, a reshaping of the design process has been taking place, bringing forward interaction/experiential concerns and co-design approaches throughout disciplines in a push for a more thorough consideration of projects' contexts. This paper reports an exploratory study of how immersive contextual representations influence the co-ideation process. Audio-video recordings of co-ideation sessions (9) from a pedagogical studio were analyzed through verbal and representational (sketches and design gestures) exchanges as occurring in three different conditions: (a) pen on paper, immersive headset-free VR (b) without, and (c) with the use of contextual immersive environment (photogrammetric scans and 3D models). Results show that, although design conversations were similar across all conditions, design gestures were more often directly related to- than independent from the graphical representation only when using an immersive contextual environment. Furthermore, the rate of sketching episodes in general and sketching explanations were considerably lower in this condition. This could imply that use of pre-made context greatly reduces the need of sketching elements to support a clearer co-ideation.
keywords	Immersive context; Design gestures; Design conversations; Sketches; Co-design studio; Design cognition
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_237
id	ecaade2018_237
authors	Beir?o, José, Mateus, Nuno and Siopa Alves, Jo?o
year	2018
title	Modular, Flexible, Customizable Housing and 3D Printed - An experiment in architectural education
doi	https://doi.org/10.52842/conf.ecaade.2018.1.381
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 381-390
summary	Technological developments in construction always bring new expectations in terms of design possibilities. The use of digital tools both in design exploration and applied to explore new forms of computer controlled manufacture provide opportunities for the emergence of new tectonics. Because these transformations change our construction reality fast and with impacts never seen before, it is important that architectural education follows such change and prepares students for what will be their future really, making them capable to accept and incorporate the tectonic implications of digital tools and construction methods in the way they design. This paper shows a tutored approach to mass customized housing resorting to 3D printed parametric modular construction.Please write your abstract here by clicking this paragraph.
keywords	caad education; mass customization; 3D printed housing
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_405
id	ecaade2018_405
authors	Belém, Catarina and Leit?o, António
year	2018
title	From Design to Optimized Design - An algorithmic-based approach
doi	https://doi.org/10.52842/conf.ecaade.2018.2.549
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 549-558
summary	Stringent requirements of efficiency and sustainability lead to the demand for buildings that have good performance regarding different criteria, such as cost, lighting, thermal, and structural, among others. Optimization can be used to ensure that such requirements are met. In order to optimize a design, it is necessary to generate different variations of the design, and to evaluate each variation regarding the intended criteria. Currently available design and evaluation tools often demand manual and time-consuming interventions, thus limiting design variations, and causing architects to completely avoid optimization or to postpone it to later stages of the design, when its benefits are diminished. To address these limitations, we propose Algorithmic Optimization, an algorithmic-based approach that combines an algorithmic description of building designs with automated simulation processes and with optimization processes. We test our approach on a daylighting optimization case study and we benchmark different optimization methods. Our results show that the proposed workflow allows to exclude manual interventions from the optimization process, thus enabling its automation. Moreover, the proposed workflow is able to support the architect in the choice of the optimization method, as it enables him to easily switch between different optimization methods.
keywords	Algorithmic Design; Algorithmic Analysis; Algorithmic Optimization; Lighting optimization; Black-Box optimization
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade03_397_180_bialas
id	ecaade03_397_180_bialas
authors	Bialas, Z., Glinkowska, A., Kepczynska-Walczak, A., Szrajber, R. and Urbaniak, M.
year	2003
title	The ICT as a Driving Force in The Field of Archaeological Research
doi	https://doi.org/10.52842/conf.ecaade.2003.397
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 397-402
summary	The paper is a contribution to the domain of computer tools for archaeological excavations and research. The present project described in this paper has been undertaken in close co-operation of specialists from two universities including archaeologists and architects from the CAAD unit. The project objective is to assess the suitability of new media offering an alternative to the traditional methods in archaeological practice.
keywords	Innovation; Research, Education & Practice; Integration of ICT withinarchaeological research
series	eCAADe
email
more	http://www.arch.p.lodz.pl
last changed	2022/06/07 07:52

_id	caadria2003_a6-4
id	caadria2003_a6-4
authors	Bialas, Z.,Glinkowska, A., Kepczynska-Walczak, A. and Szrajber, R.
year	2003
title	Architectural Heritage As A Force In Networked Caad Education
doi	https://doi.org/10.52842/conf.caadria.2003.801
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 801-808
summary	This paper aims to present a project being currently in progress. The task is to describe a concept for future access to information resources which cover the Polish (in wider international context) architectural and urban design, architectural heritage, applied arts in form of drawings, images, 3D models and VR along text explanations. In this way the database would enable access to huge resources and didactic packages. The proposed database would be primarily addressed to students of architecture, who in addition would be involved in creation of the collection, e.g. through building 3D models.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2015_77
id	ecaade2015_77
authors	Bialkowski, Sebastian and Kepczynska-Walczak, Anetta
year	2015
title	Engineering Tools Applied in Architecture - Challenges of Topology Optimization Implementation
doi	https://doi.org/10.52842/conf.ecaade.2015.1.261
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 261-268
wos	WOS:000372317300028
summary	Computation, in the context of a digital designing process, is redefining architectural practice. Architects are developing new sets of tools which are dramatically changing the typical way of design procedure. The paper describes the research assumptions, problems and solutions proposition, aimed at creation of a real-time form finding tool for architects based on engineering methods. Through intersecting architectural form evaluation with engineering analysis and optimisation tools it is highly intended to offer the opportunity to variety of architects and designers to use the exceedingly complex and compound process for their design improvement. The form finding tool, to be effective and reliable, has to provide immediate feedback to a designer. This requirement enforces a software developer to use more sophisticated solutions. The paper focuses on possibilities of already known engineering procedures acceleration such as Finite Element Method or Topology Optimization for effective implementation in architectural design process.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=1337360e-702e-11e5-90b6-cbdace47c7fb
last changed	2022/06/07 07:52

For more results click below: