Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 560

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
wos	WOS:000402063700058
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2012_007
id	ascaad2012_007
authors	Abdelsalam, Mai M.
year	2012
title	The Use of Smart Geometry in Islamic Patterns - Case Study: Mamluk Mosques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 49-68
summary	It is noted that architects need new and quick methods designing the historic architectural styles, as well as restoring the historical urban areas particularly the Islamic ones. These designs and restorations should adapt to the basics of the Islamic style used; general concept, module and features. Smart Geometry provides advanced design concepts and increases alternative variations. Parametric design softwares also add more rules and relations on the design process. Obviously, the Islamic module and proportions are used as design generators that result in extracting a number of alternatives easily in a little time. Generative Components (GC) is the parametric software used to achieve the desired objectives of this research.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_007.pdf
last changed	2012/05/15 20:46

_id	ecaade2022_168
id	ecaade2022_168
authors	Abdulmawla, Abdulmalik, Schneider, Sven, Koenig, Reinhard, Bielik, Martin and Fuchkina, Ekaterina
year	2022
title	Parametric Urban Data Structuring and Spatial Query - Advanced data mapping and selection methods for parametric modelling environments
doi	https://doi.org/10.52842/conf.ecaade.2022.2.277
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 277–286
summary	This paper presents a method for organising urban data inside the CAD environment into a hierarchical structure, which promotes the ease of transferring information between all available urban elements, from streets to buildings passing by the plots and blocks. This is done using parametric methods that map the urban data using the available CAD and GIS records. Finally, the paper presents a couple of example scenarios where such methods are most needed and how much they could facilitate more detailed and complex data to be accessed, compared, and analysed.
keywords	Urban Query, Urban Geometry, Spatial Mapping
series	eCAADe
email
last changed	2024/04/22 07:10

_id	cf2003_m_006
id	cf2003_m_006
authors	ACHTEN, Henri and JESSURUN, Joran
year	2003
title	Learning From Mah Jong - Towards a Multi-Agent System that can Recognize Graphic Units
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 115-124
summary	Sketching is a major means of exploiting the first conceptual developments in architectural design. If we want to support the architect in the ideas-developing phase of design, then we need to understand the conventions of depiction and encoding in drawings. The theory of graphic units provides an extended list of such conventions that are widely used. We propose that a multi-agent system for recognition of graphic units in drawings is fruitful: agents can specialize in graphic units, a multi-agent system can deal with ambiguity through negotiation and conflict resolution, and multi-agent systems function in dynamically changing environments. We first make a multi-agent system that can do something simpler: playing Mah Jong solitary. The Mah Jong solitary system shares the following important features with a multi-agent system that can recognize graphic units: (1) specialized agents for moves; (2) negotiation between agents to establish the best move; (3) dynamically changing environment; and (4) search activity in more advanced strategies. The paper presents the theoretical basis of graphic units and multi-agents systems. The multi-agent framework and its implementation is presented. Various levels of game play are distinguished, and these are correlated to the multi-agent system. The paper shows how the findings form the basis for graphic unit recognition.
keywords	artificial intelligence, games, graphic units, agents
series	CAAD Futures
email
last changed	2003/11/22 16:39

_id	2dbc
authors	Achten, Henri
year	1996
title	Teaching Advanced Architectural Issues Through Principles of CAAD
doi	https://doi.org/10.52842/conf.ecaade.1996.007
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 7-16
summary	The paper discusses the differences between teaching CAAD by using standard software ("off-the-shelf"-software) and teaching the principles of CAAD ("principles-teaching"). The paper distinguishes four kinds of application for design systems in education: social systems, professional systems, educational systems, and innovative systems. The paper furthermore proposes to distinguish between computational issues and architectural issues relative to design systems. It appears that there is not a principled distinction between software-teaching and principles-teaching when it comes to computational issues of design systems. However, when the architectural content of CAAD systems is concerned, then principles of CAAD systems seem to be more appropriate for teaching. The paper presents work on generic representations as a specific case. Generic representations can be used to teach one particular kind of architectural content of design systems. The paper ends with conclusions.
series	eCAADe
email
more	http://www.ds.arch.tue.nl/
last changed	2022/06/07 07:54

_id	7e52
authors	Achten, Henri
year	2001
title	Normative Positions in Architectural Design - Deriving and Applying Design Methods
doi	https://doi.org/10.52842/conf.ecaade.2001.263
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 263-268
summary	This paper presents a recently finished course of eight weeks where CAAD skills, design methodology, and architectural theory are combined to discuss possible perspectives on the use of the computer in design, and its influence on architecture. In the course, three contemporary architects were studied; Peter Eisenman, Ben van Berkel, and Greg Lynn. Each was discussed on aspects of ontology (which are the elements of discourse), design method (design process and organization of the process), and the use of the computer (techniques and approaches). These were linked with design theory, architectural theory, and CAD-theory. The reflection on the work of the architects resulted in a number of design methods for each architect. The design methods were adapted to the available technologies in the university as well as to the scope of the exercise, since the period of eight weeks for an exercise cannot compete with design processes in practice that take many participants and much time. The students then applied the design methods to a design task: student housing and an exhibition pavilion on the campus area of the university. The task was so devised, that students could focus on either architectural or urban design level with one of the design methods. Also, the choice of architects and accompanying design methods was made in such a way that students with low, medium, and advanced computer skills could take part in the course and exercise. In a workshop held at the Czech Technical University (CVUT) in Prague, the same procedure was used in a one-week period for a different design task, but in an otherwise almost identical setting with respect to the CAAD software used. The methods and material were easily transferred to the other setting. The students were able to cope with the task and produced surprising results in the short time span available. The paper will provide an overview of the course, discuss the pedagogical implications of the work, and discuss how this particular work can be generalized to incorporate other architects and approaches.
keywords	CAAD: Design Methods, Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2007_006
id	ascaad2007_006
authors	Afify, H.M.N. and Z. A. Abd ElGhaffar
year	2007
title	Advanced Digital Manufacturing Techniques (CAM) in Architecture
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 67-80
summary	Building projects today are not only born out digitally, but they are also realized digitally through "file-to-factory" processes of computer aided manufacturing (CAM) and computer numerically controlled (CNC) technologies. It was the challenge of constructability that brought into question, what new instruments of practice are needed to take advantage of the opportunities opened up by the digital modes of production, instead of whether a particular form is buildable. In this case of building construction, architects could design with attention to innovative details, afforded by unique shapes and sizes, knowing that whatever they created on their computer screen could be fabricated digitally for an affordable price. The aims of the research are to discuss and analyze the digital manufacturing techniques (CAM) in architecture and its fabrication, production process. To understand how these technologies fit within a broader context of architectural practice. The research begins with defining, what is digital manufacturing in architecture, its potentials, components and influences in the contemporary architecture. Further more it discusses the digital fabrication, Two- dimensional cutting, subtractive fabrication, additive fabrication and formative fabrication. The assembly technique, building skin, new materials and mass- customization in digital manufacturing techniques (CAM). That will be a hand in analyzing several case studies.
keywords	Digital technology in architecture, Digital manufacturing, Formative fabrication, New materials, Fabrication machines and software.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ijac20086405
id	ijac20086405
authors	Ahlquist, Sean; Fleischmann, Moritz
year	2008
title	Elemental Methods for Integrated Architectures: Experimentation with Design Processes for Cable Net Structures
source	International Journal of Architectural Computing vol. 6 - no. 4, 453-475
summary	Tension active systems are compelling architectural structures having an intimate connection between structural performance and the arrangement of material. The direct flow of structural forces through the material makes these systems attractive and unique from an aesthetic point of view, but they are a challenge to develop from a design and an engineering perspective. Traditional methods for solving such structural systems rely on both analog modeling techniques and the use of highly advanced engineering software. The complexity and laborious nature of both processes presents a challenge for iterating through design variations. To experiment with the spacemaking capabilities of tension active systems, it is necessary to design methods that can actively couple the digital simulation with the analog methods for building the physical structure. What we propose is a designer-authored process that digitally simulates the behaviors of tension active systems using simple geometric components related to material and structural performance, activated and varied through elemental techniques of scripting. The logics for manufacturing and assembly are to be embedded in the digital generation of form. The intention is to transform what is a highly engineered system into an architectural system where investigation is as much about the determination of space and environment as it is about the arrangement of structure and material.
series	journal
last changed	2009/03/03 07:48

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
doi	https://doi.org/10.52842/conf.ecaade.2011.799
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
wos	WOS:000335665500092
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
doi	https://doi.org/10.52842/conf.caadria.2000.491
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	461b
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2002
title	The Role of Advanced VR Interfaces in Knowledge Management and Their Relevance to CAD
doi	https://doi.org/10.52842/conf.caadria.2002.277
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 277-284
summary	This paper introduces knowledge management and computer aided visualisation as a key in establishing both valuation and value creation capabilities in the enterprise where dissemination of knowledge and effective sharing of information through collaboration spur creativity and stimulate business practices. The paper draws an original approach for the design and development of a universal information/knowledge visualisation tool and outlines the mechanics that enable the working prototype that focuses on CAD.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia09_30
id	acadia09_30
authors	Aish, Robert
year	2009
title	Tools of Expression: Notation and Interaction for Design Computation
doi	https://doi.org/10.52842/conf.acadia.2009.030
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 30-31
summary	Design considers function, fabrication, and aesthetics collectively. Computation is beginning to affect the competitive dynamics of design. Using algorithms, designers are exploring forms that are essentially “undrawable,” even with advanced modeling and direct manipulation techniques. Determining the appropriate functional characteristics may require the application of increasingly complex structural- and environmental-performance analysis techniques. To realize physically a design may require further geometric analysis and rationalization, and the use of complex computer-controlled fabrication techniques.
keywords	Design, Computation, Form Finding, Design logic
series	ACADIA
type	Keynote paper
email
last changed	2022/06/07 07:54

_id	sigradi2021_235
id	sigradi2021_235
authors	Akcay Kavakoglu, Aysegul
year	2021
title	Computational Aesthetics of Low Poly: [Re]Configuration of Form
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 17–28
summary	Low-poly modeling as an emerging field in visual arts, product design and architecture has an essential effect both on the designer's and the viewer/user's experience. It has an advanced abstraction ability over the reconfiguration of form. This paper examines the visual features of low-poly form in terms of the computability of its aesthetics. A visual feature classification is made by referencing George David Birkhoff's aesthetic measure theory based on the complexity and order relationship. Topo[i]wall installation has been examined as a case study during the analysis. The relationship between form, computation, aesthetics and human-computer interaction are elaborated according to the results. It has been observed that low poly modeling offers a variation set in terms of compositional features, which are proportion, balance, vertical and horizontal network system while protecting its unity through the analysis of the generated computational model.
keywords	computational aesthetics, low poly, form configuration, projection mapping, media art
series	SIGraDi
email
last changed	2022/05/23 12:10

_id	sigradi2021_234
id	sigradi2021_234
authors	Al Nouri, Mhd Ziwar, Baghdadi, Bilal and Khateeb, Nairooz
year	2021
title	Re-coding Post-War Syria: The Role of Data Collection & Objective Investigations in PostWar Smart City
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 127–145
summary	Re-coding post-war Syria is an ongoing research and data platform, focused on innovation and collecting comprehensive, infrastructural and socioeconomic analytics, synchronization data, by using AI driven to give a more transparent image of innovating a new methodology to regenerate the future of post-war smart cities into advanced and sustainable urban environments in a smarter way (Fig. 1). The pressure to achieve a rapid Post-war smart city without clear strategy and comprehensive analysis of all aspects will cause a particularly catastrophic collapse in the interconnected social structure, services, education and health care system, leaving a long-term impact on the society. This paper presents the current status of the Research & Documentation methodology in the Data Collection phase by the objective investigations conducted through a series of local and international workshops species developed in this research called “Re-Coding“, offering consequent direct ground surveys, statistics and documentation study of the targeted areas, merging professionalism and youth power with local community to detect an open source data used as a tool to re-generate a precarious area towards a new methodology.
keywords	Post-War Smart cities, Collecting Data, Local community, Objective Investigations, Artificial intelligence
series	SIGraDi
email
last changed	2022/05/23 12:10

_id	ascaad2016_052
id	ascaad2016_052
authors	Al-Badry, Sally; Cesar Cheng, Sebastian Lundberg and Georgios Berdos
year	2016
title	Living on the Edge - Reinventing the amphibiotic habitat of the Mesopotamian Marshlands
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 513-526
summary	The Mesopotamian Marshlands form one of the first landscapes where people started to transform and manipulate the natural environment in order to sustain human habitation. For thousands of years, people have transformed natural ecosystems into agricultural fields, residential clusters and other agglomerated environments to sustain long-term settlement. In this way, the development of human society has been intricately linked to the extraction, processing and consumption of natural resources. The Mesopotamian Marshlands, located in one of the hottest and most arid areas on the planet, formed a unique wetlands ecosystem, which apart from millions of people, sustained a very high number of wildlife and endemic species. Several historical, political, social and climatic changes, which densely occurred during the past century, completely destroyed the unique civilisation of the area, made all the wild flora and fauna disappear and forced hundreds of thousands of people to migrate. During the last decade, many efforts have been made to restore the marshlands. However, these efforts are lacking a comprehensive design strategy, coherent goals and deep understanding of the complex current geopolitical situation, making the restoration process an extremely difficult task. This work aims at providing strategies for recovering the Mesopotamian Marshlands, organising productive functions in order to sustain the local population and design a new inhabitation model, using advanced computational tools while taking into account the extreme climatic conditions and several unique cultural aspects. Part of the aim of this work is to advance the use of computation and explore the opportunities that digital tools afford in helping find solutions to complex design problems where various design variables need to be coordinated to satisfy the design goals. Today, advanced computation enables designers to use population consumption demands, ecological processes and environmental inputs as design parameters to develop more robust and resilient regional planning strategies. This work has the double aim of first, presenting a framework for re-inhabiting the Marshlands of Mesopotamia. Second, the work suggests a design methodology based on computer-aided design for developing and organising productive functions and patterns of human occupation in wetland environments.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	ecaade2017_199
id	ecaade2017_199
authors	Al-Douri, Ph.D., Firas
year	2017
title	Computational and Modeling Tools - How effectively are Urban Designers and Planners using them Across the Design Development Process?
doi	https://doi.org/10.52842/conf.ecaade.2017.1.409
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 409-418
summary	Literature suggests that despite the increasing range and variety of computational tools and technologies, they have not really been employed for designing as extensively as it might be. This is due in part to the numerous challenges and impediments limiting their effective usage such as the methodological, procedural, and substantive factors and limitations, and skepticism about their impact of usage on the design process and outcome. The gap in our understanding of how advanced computational tools could support the design activities and design decision-making has expanded considerably to become a new area of inquiry with considerable room for the expansion of knowledge. This research is a single-case study that has been pursued in two phases: literature review and survey followed by analysis and discussion of the empirical results. The empirical observations were compared to the theoretical propositions and with results of similar research to highlight the areas and the extent to what the IT tools' usage have influenced the outcome of the design process. The comparison has helped highlight, explain, and justify the mechanism and improvements in the design outcome. Please write your abstract here by clicking this paragraph.
keywords	Computational urban design; Urban Design Practice
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ascaad2009_hussein_albotany
id	ascaad2009_hussein_albotany
authors	Albotany, Hussein S.
year	2009
title	Development of Digital City Models Using 3d GIS
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 409-418
summary	“Digital city” is a copy of an actual city in the virtual space. It is expected to play an important role in urban planning, disaster simulation etc. Recent advanced remote sensing technologies, which are capable to quickly provide detailed information of city areas, ease the construction of 3D city models. Urbanization has evinced interest from a wide section of the society including experts, amateurs and novices. With the development and infrastructure initiatives mostly around the urban centers, the impacts of urbanization and sprawl would be on the environment and the natural resources. The research introduces an application of 3D GIS on Manama City.
series	ASCAAD
email
last changed	2009/06/30 08:12

For more results click below: