Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 69

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2023_426
id	ecaade2023_426
authors	Adelzadeh, Amin, Karimian-Aliabadi, Hamed and Robeller, Christopher
year	2023
title	Wave-edge Modeling Method for Segmented Timber Plate Shell Structures: A computational tool for optimizing the bonding area of CLT joints
doi	https://doi.org/10.52842/conf.ecaade.2023.1.301
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 301–310
summary	The paper presents an algorithmic modeling tool for segmented timber shell structures made of glued wave-edge CLT plates. The goal is to provide a larger bonding area and thereby higher adhesive strength between plates, especially where a higher tension-resistant capacity is required. In addition to a number of contemporary research for exploring stereotomic modules, the inspiration is taken from the long history of the traditional glued finger joints in carpentry where they are used for providing higher interlocking capacity and adhesive strength. The structural performance of regular and glued finger joints is directly proportional to the bonding area between adjoining elements where they are interlocked and glued. Hence, expanding the shared faces would intrinsically magnify the structural performance of the glued finger joints. The paper presents the modeling method of a material-efficient, grain-informed, and structurally-optimized wedge edge joint system for the multi-shaped shell structures where the wave pattern is chosen for generating smoother fabrication toolpaths compared to any sharp-cornered pattern. The algorithm developed by the authors can efficiently maximize the glue bond by optimizing the wave-edge properties dynamically with respect to the geometric design, material system, and structural analysis within a feedback loop. The wave-edge properties directly affect the material waste and fabrication time and cost; therefore, the production parameters could be directly considered and controlled within the design process. The algorithm is able to produce the structural data model for the direct RFEM structural analysis, and fabrication data for automated production of multitude elements. The paper argues the application possibilities and limitations of the joint system for multi-shaped timber plate shells made of a multitude of geometrically-differentiated timber plates.
keywords	Algorithmic Design, Wave-edge Joint System, CLT, Shell Structure, Timber Prefabrication
series	eCAADe
email
last changed	2023/12/10 10:49

_id	acadia17_38
id	acadia17_38
authors	Ahlquist, Sean; McGee, Wes; Sharmin, Shahida
year	2017
title	PneumaKnit: Actuated Architectures Through Wale- and Course-Wise Tubular Knit-Constrained Pneumatic Systems
doi	https://doi.org/10.52842/conf.acadia.2017.038
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 38-51
summary	This research explores the development of seamless pneumatically actuated systems whose motion is controlled by the combination of differentially knitted textiles and standardized thin-walled silicone tubing. This work proposes a fundamental material strategy that addresses challenges ranging from soft robotics to pneumatic architecture. Research in soft robotics seeks to achieve complex motions through non-mechanical monolithic systems, comprised of highly articulated shapes molded with a combination of elastic and inelastic materials. Inflatables in architecture focus largely on the active structuring of static forms, as facade systems or as structured envelopes. An emerging use of pneumatic architecture proposes morphable, adaptive systems accomplished through differentiated mechanically interconnected components. In the research described in this paper, a wide array of capabilities in motion and geometric articulation are accomplished through the design of knitted sleeves that generate a series of actuated “elbows.” As opposed to molding silicone bladders, differentiation in motion is generated through the more facile ability of changing stitch structure, and shaping of the knitted textile sleeve, which constrains the standard silicone tubing. The relationship between knit differentiation, pneumatic pressure, and the resultant motion profile is studied initially with individual actuators, and ultimately in propositions for larger seamless assemblies. As opposed to a cellular study of individual components, this research proposes structures with multi-scalar articulation, from fiber and stitch to overall form, composed into seamless, massively deformable architectures.
keywords	material and construction; fabrication; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
doi	https://doi.org/10.52842/conf.ecaade.2011.799
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
wos	WOS:000335665500092
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2016_055
id	ecaade2016_055
authors	Baranovskaya, Yuliya, Prado, Marshall, Dörstelmann, Moritz and Menges, Achim
year	2016
title	Knitflatable Architecture - Pneumatically Activated Preprogrammed Knitted Textiles
doi	https://doi.org/10.52842/conf.ecaade.2016.1.571
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 571-580
summary	Textiles are widely used in architecture for tensile structures, as they are lightweight and can easily span large distances. These structures typically require an external framework for a support. Inflatable structures are self-supporting but are limited to relatively simple forms or require complex and predetermined cut patterns. The development of an adaptive and programmable textile system with an integrative method for pneumatic activation would create a novel self-supporting structure with high degree of design and architectural potential. This creates a highly integrative hybrid system where the generic pneumatic membranes are constrained by the differentiated knitted textile skin that is stretched in several directions under air pressure. This allows for an innovative, lightweight, easily transportable design, where the preprogrammed knitting pattern defines the structure, geometry and formation, activated under pneumatic pressure.
wos	WOS:000402063700062
keywords	programming textiles; binary textiles; analogue computing; air inflation; grading textile properties
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddss9811
id	ddss9811
authors	Barbanente, A., Conte, E. and Monno, V.
year	1998
title	Changing trends and approaches in human and computer modelling for social housing policies
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper discusses conceptual issues, goals and preliminary results of an on-going research which aims at building a Decision Support System for public housing environmental oriented maintenance and management in a city in Southern Italy, Bari. Traditional post-war Italian housing policies are compared with more recent approaches in the field, pointing out the change from quantitative, aggregated, more simple building problems and relatedapproaches to qualitative, differentiated, complex ones integrating social, economic and environmental dimensions with the aim of regenerating deteriorated residential areas. The paper claims for the need shift, both in the human and computer areas, from traditional quantitative models to new approaches able to manage also qualitative variables, temporal dynamics, emergencies, and intentionality, since they appear key aspects of the real world to be modelled. The housing estate of Bari and its needs of maintenance and management are examined, eliciting essential related knowledge using the interview technique. The clear orientation towards sustainable policies for urban regeneration, at a local, national, and Community level, is also considered. The innovative and collaborative nature of such policies and the attention to be paid to the social aspects ofthe problem require a complex DSS, integrating various kind of hypertexts, information systems and case-based fuzzy expert systems, whose main aims, functions, software and general organisation are outlined in the paper.
series	DDSS
last changed	2003/11/21 15:16

_id	ecaade2015_222
id	ecaade2015_222
authors	Barczik, Guenter
year	2015
title	Differentiated Continuity and Mutual Support - How Intersecting and Unrolling Operations, Made Manageable through CAD, Facilitate Richer and More Effective Spatial Articulations
doi	https://doi.org/10.52842/conf.ecaade.2015.1.389
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 389-393
summary	The two geometric operations of intersecting shapes with one another and unfolding complex shapes into flat patterns have through CAD software been changed from challenge to triviality. Thus, combinations of shapes that have eluded designers for the difficulty of their handling are now at the hands of everybody who is able to use common CAD packages. We investigate what this can mean for architectural design.
wos	WOS:000372317300042
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=a6fef7a2-7022-11e5-abe6-338fd23b59eb
last changed	2022/06/07 07:54

_id	acadia13_293
id	acadia13_293
authors	Bessai, Tom
year	2013
title	Bending-Active Bundled Structures: Preliminary Research and Taxonomy Towards an Ultra-Light Weight Architecture of Differentiated Components
doi	https://doi.org/10.52842/conf.acadia.2013.293
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 293-300
summary	This paper documents preliminary research into a bending-active architecture that leverages the “bundling” of linear force-active elements in order to create spatial diversity and differentiation.The primary design components of the system are light-weight GFRP rods and tubes that perform well in elastic bending. Material testing and iterative physical model studies are documented, and provide a framework to guide the further development of emerging spring-based computation methods. Challenges to the system include the analysis and resolution of rod-to-rod bundled connections, as well as the development of predictable bifurcation and crossing unions. The paperidentifies key precedents to the work followed by a brief summary of the material selection and testing framework. A speculative taxonomy of bundled bending-active “types” is proposed and supported by examples and prototypes.
keywords	Bundling, Bending-Active, Force-Active Architecture, Material Systems, Spring-based Modeling
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	acadia19_80
id	acadia19_80
authors	Bouayad, Ghali
year	2019
title	Three-Dimensional Translation of Japanese Katagami Patterns
doi	https://doi.org/10.52842/conf.acadia.2019.080
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 80-89
summary	The aim of this ongoing doctoral research is to rely on the incommensurable potential held in Japanese Katagami patterns in order to translate them into three-dimensional speculative architectures and architectural components that afford architects other design approaches differentiated from systemic and typical space configurations. While many designers are diving in the generative and computational design world by developing new personal methods, we would like to recycle the existing production of Katagami patterns into three-dimensional architectural elements that will perpetuate work of Katagami artists beyond time, borders, and scope of applicability. Given that the current digital shift has given us more computation power, we are broadening Katagami with new fabrication strategies and new methods to explore, produce, and stock geometry and data. In this paper, we rely on the Processing library IGeo (developed by Satoru Sugihara) to build bottom-up agent-based algorithms to study the architectural potential of Katagami patterns as a top-down clean and simple initial topology that avoids imitation of standard templates applied during the process of configuring and planning architectural space.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2011_416
id	sigradi2011_416
authors	Castro, Carlos; Vega, Juan Ignacio; Al-haddad, Tristán
year	2011
title	Botterfold, cubierta celosía autosoportante [Botterfold, self-supporting sun break cover]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 206-209
summary	Botterfold is a reflective self-supporting mono component sun break cover that research the architectural design and materialization using digital technologies of parametric modeling and fabrication. Its structure is made up of 1200 differentiated aluminum components milling, folded, assembled and riveted. It is designed in Grasshopper plug-in for Rhinoceros 3d modeling. It generates a responsive definition to the variation of
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	acadia15_47
id	acadia15_47
authors	Chaaraoui, Rizkallah; Askarinejad, Ali
year	2015
title	Anisoptera; Anisopteran Deformation and the Latent Geometric Patterns of Wood Envelopes
doi	https://doi.org/10.52842/conf.acadia.2015.047
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 47-56
summary	Advancements in technologies provide Architects, today, with the means to expose new expressive forms using traditional materials. It is therefore possible to design dynamic actuating systems, where several different expressions, or differentiations inherent in the same material, are able to modify its topology and enhance its properties. Wood, traditionally used in construction, is given static expression during its life cycle, where an alignment, or assembly detail, helps retain its original shape. This research outlines the integration of specific and individual anatomical information of wood during the design process. It aids in utilizing the analyzed biological variability and natural irregularities of wood within a material-based architecture, in view of developing a lightweight, and light-filtering dynamic skin. Additionally, the research helps to explore an understanding of the differentiated material composition of wood as its major capacity, rather than its deficiency. Moreover, it analyzes form, material, and structure, as complex interrelations that are embedded in, and explored through an integral design process that seeks to employ typically disregarded, highly differentiated flat materials, in view of enhancing their latent dimensional deformation potential. The main focus of this research is to explore that latent geometric deformation of emerging patterns based on an array of heterogeneous wood veneers in relation to their Hygroscopic and Anisotropic properties. These properties are expressed through a set of flat skins and Mobius arrangements, articulating complex geometric ranges that reveal additional properties, such as bendability and flexibility.
keywords	Shape-shifting, Geometric patterns, Anisotropic, Hygroscopic, Open systems, Building envelope
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2022_245
id	caadria2022_245
authors	Chai, Hua, Guo, Zhixian, Wagner, Hans Jakob, Stark, Tim, Menges, Achim and Yuan, Philip F.
year	2022
title	In-Situ Robotic Fabrication of Spatial Glulam Structures
doi	https://doi.org/10.52842/conf.caadria.2022.2.041
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 41-50
summary	While current approaches in timber construction stress the advantages of off-site prefabrication, glued laminated timber(glulam) structures is limited to the constraints of standardized, prefabricated mostly linear elements, which also lends itself only to building typologies that offer an increased level of standardization and regularity. The design freedom of timber structures is incomparable to that of reinforced concrete structures, which mostly gains from the in-situ fabrication process. An in-situ robotic timber fabrication platform allows the on-site construction of glulam structures with highly differentiated networks of beams composed of robotically assembled discrete linear elements. Based on the possibilities of such mobile robotic fabrication process, this paper explores novel architectural typologies of spatial glulam structures. The research is conducted from several aspects including joint tectonics, design method, and robotic fabrication process. A large-scale pavilion is designed and fabricated to verify the feasibility of the proposed system. This research could provide a novel mode of in-situ robotic timber fabrication and corresponding glulam structure system for timber construction.
keywords	Mobile Robot, Timber Structure, In-situ Fabrication, Computational Design, SDG 9
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	caadria2018_156
id	caadria2018_156
authors	Chee, Ryan Wei Shen, Tan, Wei Lin, Goh, Wei Hern, Amtsberg, Felix and Dritsas, Stylianos
year	2018
title	Locally Differentiated Concrete by Digitally Controlled Injection
doi	https://doi.org/10.52842/conf.caadria.2018.1.195
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 195-204
summary	This paper presents a digital fabrication process for concrete which may be deployed for surface texturing, volumetric modification of material properties and 2D and 3D forming. We process concrete in its slurry state by locally injecting chemicals in solution which cause vigorous effervescent reaction to take place. By precise and controlled dispensing, using computer software and robotic hardware developed, we produce local differentiation in the finally set concrete artefacts. Our work contributes to additive and subtractive 3D manufacturing as well as functionally graded materials fabrication.
keywords	Digital Fabrication; Additive Manufacturing; Functionally Graded Materials; Architectural Robotics.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2020_348
id	ecaade2020_348
authors	Chiujdea, Ruxandra Stefania and Nicholas, Paul
year	2020
title	Design and 3D Printing Methodologies for Cellulose-based Composite Materials
doi	https://doi.org/10.52842/conf.ecaade.2020.1.547
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 547-554
summary	A growing awareness of architecture's environmental responsibility is encouraging a shift from an industrial age to an ecological one. This shift emphasises a new era of materiality, characterised by a special focus on bio-polymers. The potential of these materials is to address unsustainable modes of resource consumption, and to rebalance our relationship with the natural. However, bio-polymers also challenge current design and manufacturing practices, which rely on highly manufactured and standardized materials. In this paper, we present material experiments and digital design and fabrication methodologies for cellulose-based composites, to create porous biodegradable panels. Cellulose, the most abundant bio-polymer on Earth, has potential for differentiated architectural applications. A key limit is the critical role of additive fabrication methods for larger scale elements, which are a subject of ongoing research. In this paper, we describe how controlling the interdependent relationship between the additive manufacturing process and the material grading enables the manipulation of the material's performance, and the related control aspects including printing parameters such as speed, nozzle diameter, air flow, etc., as well as tool path trajectory. Our design exploration responds to the emerging fabrication methods to achieve different levels of porosity and depth which define the geometry of a panel.
keywords	cellulose-based composite material; additive manufacturing; material grading; digital fabrication; spatial print trajectory; porous panels
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia13_033
id	acadia13_033
authors	Correa, David; David Krieg, Oliver; Menges, Achim; Reichert, Steffen; Rinderspacher, Katja
year	2013
title	HygroSkin: A prototype project for the development of a constructional and climate responsive architectural system based on the elastic and hygroscopic properties of wood
doi	https://doi.org/10.52842/conf.acadia.2013.033
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 33-42
summary	This paper focuses on the implementation of a computational design and robotic fabrication method that integrates the elastic and hygroscopic behavior of wood as active drivers in the design process, using the material’s differentiated characteristics as its main capacity. The project builds on previous work by the authors, furthering their research on the formal and performative transfer of such behaviors into informed architectural systems. Wood’s fibrous structure, relatively low stiffness and high structural capacity are instrumentalized into self-forming mechanisms through conical elastic deformation, while the same organic makeup and corresponding hygroscopic properties have also been programmed, formally articulated and integrated into a climate responsive architectural system. This research will be presented alongside a full-scale architectural project (Figure 1, Figure 2).
keywords	computational design; robotic fabrication; wood construction; elastic bending; hygroscopic actuation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	acadia14_311
id	acadia14_311
authors	Crolla, Kristof; Williams, Nicholas
year	2014
title	Smart Nodes: A System for Variable Structural Frames with 3D Metal-Printed Nodes
doi	https://doi.org/10.52842/conf.acadia.2014.311
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 311-316
summary	The SmartNodes research explores the potentials for highly-designed, customized connection nodes to be used in combination with standardized components in enabling a system of highly differentiated structures. This paper reports on the design workflow and research in progress towards the development of a prototype structure.
keywords	3D Metal Printing, Frame Structures, Embedded Intelligence, Digital Manufacturing, Mass-Customization, Digital Design Workflow, Works in Progress.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	acadia21_270
id	acadia21_270
authors	Dambrosio, Niccolo; Schlopschnat, Christoph; Zechmeister, Christoph; Rinderspacher, Katja; Duque Estrada, Rebeca; Knippers, Jan; Kannenberg, Fabian; Menges, Achim; Gil Peréz, Marta
year	2021
title	Maison Fibre
doi	https://doi.org/10.52842/conf.acadia.2021.270
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 270-279.
summary	This research demonstrates the development of a hybrid FRP-timber wall and slab system for multi-story structures. Bespoke computational tools and robotic fabrication processes allow for adaptive placement of material according to specific local requirements of the structure thus representing a resource-efficient alternative to established modes of construction. This constitutes a departure from pre-digital, material-intensive building methods, based on isotropic materials towards genuinely digital building systems using lightweight, hybrid composite elements. Design and fabrication methods build upon previous research on lightweight fiber structures conducted at the University of Stuttgart and expand it towards inhabitable, multi-story building systems. Interdisciplinary design collaboration based on reciprocal computational feedback allows for the concurrent consideration of architectural, structural, fabrication and material constraints. The robotic coreless filament winding process only uses minimal, modular formwork and allows for the efficient production of morphologically differentiated building components. The research results were demonstrated through Maison Fibre, developed for the 17th Architecture Biennale in Venice. Situated at the Venice Arsenale, the installation is composed of 30 plate like elements and depicts a modular, further extensible scheme. While this first implementation of a hybrid multi-story building system relies on established glass and carbon fiber composites, the methods can be extended towards a wider range of materials ranging from ultra-high-performance mineral fiber systems to renewable natural fibers.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2016_114
id	ecaade2016_114
authors	Erdine, Elif and Kallegias, Alexandros
year	2016
title	Calculated Matter - Algorithmic Form-Finding and Robotic Mold-Making
doi	https://doi.org/10.52842/conf.ecaade.2016.1.163
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 163-168
summary	The paper addresses a specific method for the production of custom-made, differentiated moulds for the realization of a complex, doubly-curved wall element during an international three-week architectural programme, Architectural Association (AA) Summer DLAB. The research objectives focus on linking geometry, structure, and robotic fabrication within the material agency of concrete. Computational workflow comprises the integration of structural analysis tools and real-time form-finding methods in order to inform global geometry and structural performance simultaneously. The ability to exchange information between various simulation, modelling, analysis, and fabrication software in a seamless fashion is one of the key areas where the creation of complex form meets with the simplicity of exchanging information throughout various platforms. The paper links the notions of complexity and simplicity throughout the design and fabrication processes. The aim to create a complex geometrical configuration within the simplicity of a single material system, concrete, presents itself as an opportunity for further discussion and development.
wos	WOS:000402063700018
keywords	robotic fabrication; custom form-work; generative design; structural analysis; concrete
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_192
id	ecaade2013_192
authors	Erdine, Elif
year	2013
title	Biomimetic Strategies in Tower Design
doi	https://doi.org/10.52842/conf.ecaade.2013.1.559
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 559-568
summary	The paper argues that the tower needs to respond to its environment by changing from a closed building typology towards a heterogeneous, differentiated open system that can adapt to the changing conditions within and around it. This argument is supported by focusing on the analogies and principles of specific biological examples in order to propose computationally-generated self-organizing systems. The goal of analyzing these models is to integrate their structural and geometrical characteristics with the aim of overcoming high lateral loading conditions in towers, as well as elaborating on the existence of multi-functionality and integration throughout the subsystems of the tower. A series of computational models which abstract the biological properties and articulate them with a generative approach through the use of agent-based systems are implemented according to designated evaluation criteria.
wos	WOS:000340635300058
keywords	Tower; biomimetics; integration; differentiation; generative algorithms.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia19_554
id	acadia19_554
authors	Farzaneh, Ali; Weinstock, Michael
year	2019
title	Mathematical Modeling of Cities as Complex Systems
doi	https://doi.org/10.52842/conf.acadia.2019.554
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 554-563
summary	Within the domain of computational modelling for cities, the study of complex systems has stimulated a body of research (through mathematical and scientific modelling) that has given greater insight into the characteristic of cities. These characteristics share principles in their hierarchical organisation and formation over time with that of complex living systems. The central focus of the research lies in two parts: the first is the understanding of cities as complex systems that share principles with complex living systems; the second is the computational modelling of cities as complex systems. This paper presents a computational model capable of generating urban tissues of differentiated spatial and morphological patterns that emerge over time. The generative process is driven by simultaneous interaction and exchanges between block and network systems.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2012_107
id	caadria2012_107
authors	Gerber, David and A. Senel Solmaz
year	2012
title	PARA-Typing the making of difference: Associative parametric design methodologies for teaching the prototyping of material affect
doi	https://doi.org/10.52842/conf.caadria.2012.233
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 233–242
summary	PARA-Typing the Making of Difference presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. These design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation. Then through associative parametric design technologies and methodologies, modular fields were design explored and developed in concert with material properties and constraints. Utilising digital fabrication full-scale installations were designed, manufactured, and constructed as tiled walls that created differentiated space within site-specific configurations.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; tectonics
series	CAADRIA
email
last changed	2022/06/07 07:51

For more results click below: