Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3953

Reformat results as: short short into frame detailed detailed into frame

_id	lasg_whitepapers_2016_fulltext
id	lasg_whitepapers_2016_fulltext
year	2016
title	Living Architecture Systems Group White Papers 2016
source	Living Architecture Systems Group White Papers 2016 [ISBN 978-1-988366-10-4 (EPUB)] Riverside Architectural Press 2016: Toronto, Canada
summary	Living Architecture Systems Group "White Papers 2016" is a dossier produced for the occasion of the Living Architecture Systems Group launch event and symposium hosted on November 4 and 5 at the Sterling Road Studio in Toronto and the University of Waterloo School of Architecture at Cambridge. The "White Papers 2016" presents research contributions from the LASG partners, forming an overview of the partnership and highlighting oppportunities for future collaborations.
keywords	design, dissipative methods, design methods, synthetic cognition, neuroscience, metabolism, STEAM, organicism, field work, responsive systems, space, visualizations, sensors, actuators, signal flows, art and technology, new media art, digital art, emerging technologies, citizen building, bioinspiration, performance, paradigms, artificial nature, virtual design, regenerative design, 4DSOUND, spatial sound, biomanufacturing, eskin, delueze, bees, robotics
last changed	2019/07/29 14:02

_id	ddss2006-hb-467
id	DDSS2006-HB-467
authors	A. Fatah gen. Schieck, A. Penn, V. Kostakos, E. O'Neill, T. Kindberg, D. Stanton Fraser, and T. Jones
year	2006
title	Design Tools for Pervasive Computing in Urban Environments
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 467-486
summary	In this paper we report on ongoing research in which the implications of urban scale pervasive computing (always and everywhere present) are investigated for urban life and urban design in the heritage environment of the city of Bath. We explore a theoretical framework for understanding and designing pervasive systems as an integral part of the urban landscape. We develop a framework based on Hillier's Space Syntax theories and Kostakos' PSP framework which encompasses the analysis of space and spatial patterns, alongside the consideration of personal, social and public interaction spaces to capture the complex relationship between pervasive systems, urban space in general and the impact of the deployment of pervasive systems on people's relationships to heritage and to each other. We describe these methodological issues in detail before giving examples from early studies of the types of result we are beginning to find.
keywords	Urban space, Pervasive systems, Urban computing, Space Syntax, Interaction space
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2021_001
id	caadria2021_001
authors	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.)
year	2021
title	CAADRIA 2021: Projections, Volume 2
doi	https://doi.org/10.52842/conf.caadria.2021.2
source	PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, 764 p.
summary	Rapidly evolving technologies are increasingly shaping our societies as well as our understanding of the discipline of architecture. Computational developments in fields such as machine learning and data mining enable the creation of learning networks that involve architects alongside algorithms in developing new understanding. Such networks are increasingly able to observe current social conditions, plan, decide, act on changing scenarios, learn from the consequences of their actions, and recognize patterns out of complex activity networks. While digital technologies have already enabled architecture to transcend static physical boxes, new challenges of the present and visions for the future continue to call for both innovative responses integrating emerging technologies into experimental architectural practice and their critical reflection. In this process, the capability of adapting to complex social and environmental challenges through learning, prototyping and verifying solution proposals in the context of rapidly shifting realities has become a core challenge to the architecture discipline. Supported by advancing technologies, architects and researchers are creating new frameworks for digital workflows that engage with new challenges in a variety of ways. Learning networks that recognize patterns from massive data, rapid prototyping systems that flexibly iterate innovative physical solutions, and adaptive design methods all contribute to a flexible and networked digital architecture that is able to learn from both past and present to evolve towards a promising vision of the future.
series	CAADRIA
last changed	2022/06/07 07:49

_id	caadria2021_000
id	caadria2021_000
authors	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.)
year	2021
title	CAADRIA 2021: Projections, Volume 1
doi	https://doi.org/10.52842/conf.caadria.2021.1
source	PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, 768 p.
summary	Rapidly evolving technologies are increasingly shaping our societies as well as our understanding of the discipline of architecture. Computational developments in fields such as machine learning and data mining enable the creation of learning networks that involve architects alongside algorithms in developing new understanding. Such networks are increasingly able to observe current social conditions, plan, decide, act on changing scenarios, learn from the consequences of their actions, and recognize patterns out of complex activity networks. While digital technologies have already enabled architecture to transcend static physical boxes, new challenges of the present and visions for the future continue to call for both innovative responses integrating emerging technologies into experimental architectural practice and their critical reflection. In this process, the capability of adapting to complex social and environmental challenges through learning, prototyping and verifying solution proposals in the context of rapidly shifting realities has become a core challenge to the architecture discipline. Supported by advancing technologies, architects and researchers are creating new frameworks for digital workflows that engage with new challenges in a variety of ways. Learning networks that recognize patterns from massive data, rapid prototyping systems that flexibly iterate innovative physical solutions, and adaptive design methods all contribute to a flexible and networked digital architecture that is able to learn from both past and present to evolve towards a promising vision of the future.
series	CAADRIA
last changed	2022/06/07 07:49

_id	sigradi2020_953
id	sigradi2020_953
authors	Abdallah, Yomna K.; Estevez, Alberto T.
year	2020
title	Methodology of Implementing Transformative Bioactive Hybrids in Built Environment to Achieve Sustainability
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 953-961
summary	Discrete responsive systems lack functional autonomous transformation, in response to environmental conditions and users' demands; due to shortage in direct integration of biological intelligence. Bioactive hybrids are sufficient solutions as they perform independente self-replication, differentiation of cellular structure, active metabolism, spatial propagation, adaptation, transformation, and morphogenesis. In this paper, a methodology is proposed for the design, fabrication and implementation of these hybrids in the built environment; highlighting their sustainability potentials, by merging synthetic biology, bioengineering and bioprinting, to achieve multiscale active responsiveness. The current work is part of research in biosynthesizing fibroblasts as transformative material in architectural sustainability.
keywords	Transformative hybrids, Biodigital, Bioprinting, Robotic materials, Bioengineered systems
series	SIGraDi
email
last changed	2021/07/16 11:53

_id	acadia17_18
id	acadia17_18
authors	Abdel-Rahman, Amira; Michalatos, Panagiotis
year	2017
title	Magnetic Morphing
doi	https://doi.org/10.52842/conf.acadia.2017.018
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 18-27
summary	In an attempt to design shape-morphing multifunctional objects, this thesis uses programmable matter to design self-organizing multi-agent systems capable of morphing from one shape into another. The research looks at various precedents of self-assembly and modular robotics to design and prototype passive agents that could be cheaply mass-produced. Intelligence will be embedded into these agents on a material level, designing different local interactions to perform different global goals. The initial exploratory study looks at various examples from nature like plankton and molecules. Magnetic actuation is chosen as the external actuation force between agents. The research uses simultaneous digital and physical investigations to understand and design the interactions between agents. The project offers a systemic investigation of the effect of shape, interparticle forces, and surface friction on the packing and reconfiguration of granular systems. The ability to change the system state from a gaseous, liquid, then solid state offers new possibilities in the field of material computation, where one can design a "material" and change its properties on demand.
keywords	material and construction; construction/robotics; smart materials; smart assembly/construction; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:52

_id	sigradi2009_1086
id	sigradi2009_1086
authors	Abdelhameed, Wael; Yoshiro Kobayashi
year	2009
title	Urban Wiki: An online urban design system
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This research involves the framework and design of Urban Wiki, an online urban design system employing Wiki concept. The term Urban Wiki is created by the researchers; its concepts and methodology will be introduced and presented. Urban Wiki aims to creating a networking system of urban designs, enabling the collaborative work between users around the world. The presented system framework is created and tested by the researchers from two different locations in the world. The purpose of the research is to study how the users can share effectively designing/modeling large scale urban projects. An urban project of a village scale is used to demonstrate the potentials of Urban Wiki, presenting its functions and highlighting the possible uses in the urban area. Moreover, using the created models opens up various urban paths of designing, decision-making, and sharing. Techniques employed in the design of Urban Wiki can potentially be used to build up scalable, easily navigable and extensible models of large-scale entities.
keywords	Urban design; urban planning; networking; urban wiki; modeling systems
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_324
id	ecaade2015_324
authors	Abdelmohsen, Sherif and Massoud, Passaint
year	2015
title	Integrating Responsive and Kinetic Systems in the Design Studio: A Pedagogical Framework
doi	https://doi.org/10.52842/conf.ecaade.2015.2.071
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 71-80
summary	Responsive architecture is one of the growing areas of computational design that is not getting adequate attention in CAAD curricula. A pedagogical approach to designing responsive systems requires more than the typical knowledge, tools or skill sets in architectural design studios. This paper presents a framework for integrating responsive and kinetic systems in the architectural design studio. The framework builds on findings of two design studios conducted at The American University in Cairo, Egypt. In both studios, students were asked to design elements of responsive architecture that work towards the development of their projects. The paper demonstrates the process and outcomes of both studios. It then demonstrates how concepts of integrated project delivery are incorporated to propose a framework that engages students in designing, fabricating and operating responsive systems in different phases of the design process. A discussion follows regarding dynamics of design studio in light of the proposed framework.
wos	WOS:000372316000010
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=7e59e026-6e8f-11e5-9e59-876225eebea0
last changed	2022/06/07 07:54

_id	cf2015_279
id	cf2015_279
authors	Abdelmohsen, Sherif M. and Massoud, Passaint M.
year	2015
title	Making Sense of those Batteries and Wires: Parametric Design between Emergence and Autonomy
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 279-296.
summary	This paper reports on the process and outcomes of a digital design studio that integrates parametric design and generative systems in architectural and urban design projects. It explores the interrelationship between the emergence of innovative formal representations using parametric design systems on the one hand, and design autonomy; more specifically the conscious process of generating and developing an architectural concept, on the other. Groups of undergraduate students working on an architectural project are asked to identify a specific conceptual parti that addresses an aspect of architectural quality, define strategies that satisfy those aspects, and computational methodologies to implement those strategies, such as rule-based systems, self-organization systems, and genetic algorithms. The paper describes the educational approach and studio outcomes, discusses implications for CAAD education and curricula, and addresses issues to be considered for parametric and generative software development.
keywords	Parametric modeling, generative design, emergence, autonomy, design exploration, CAAD curriculum.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2013_215
id	sigradi2013_215
authors	Abdelmohsen, Sherif M.
year	2013
title	Reconfiguring Architectural Space using Generative Design and Digital Fabrication: A Project Based Course
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 391 - 395
summary	This paper discusses a course that addresses the integration between generative design and digital fabrication in the context of reconfiguring architectural space. The objective of the course, offered for 3rd year architecture students at the Department of Architecture, Ain Shams University, Egypt, was to design and fabricate interior design elements to be installed within the department lobby. Students worked in digital and physical environments to develop 8 group projects that featured concepts of shape grammars, L-systems, fractals and cellular automata. The potential of the realized projects is discussed in terms of 3D development of systems, contextual generative design, and pedagogical objectives.
keywords	Contextual generative design; Rule-based systems; Self-organizing systems; Digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac201412407
id	ijac201412407
authors	Abdelmohsen, Sherif M.
year	2014
title	An Inquiry into Designing in Context using Generative Systems
source	International Journal of Architectural Computing vol. 12 - no. 4, 477-494
summary	The use of generative systems has been widely investigated in the architectural design process through different procedures and levels of autonomy to generate form.The digression from abstract pre- existing notions of vocabulary and rules – even when resulting in emergent forms – to address complex real- world contexts is yet a challenging undertaking.This paper explores incorporating context in the process of designing using generative systems from ideation to fabrication, and explores the relationship between the emergent nature of generative design and the situated act of designing while using generative design tools.A course offered for 3rd year architecture students at the Department of Architecture, Ain Shams University, Egypt, was designed for this purpose. 110 students employed systems including shape grammars, L- systems, fractals and cellular automata, to design and fabricate 8 group projects.A discussion around emergence and situatedness is presented, with special attention to the designing process from ideation to fabrication.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
wos	WOS:000402063700058
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_370
id	ecaade2018_370
authors	Abdelmohsen, Sherif, Massoud, Passaint, El-Dabaa, Rana, Ibrahim, Aly and Mokbel, Tasbeh
year	2018
title	A Computational Method for Tracking the Hygroscopic Motion of Wood to develop Adaptive Architectural Skins
doi	https://doi.org/10.52842/conf.ecaade.2018.2.253
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 253-262
summary	Low-cost programmable materials such as wood have been utilized to replace mechanical actuators of adaptive architectural skins. Although research investigated ways to understand the hygroscopic response of wood to variations in humidity levels, there are still no clear methods developed to track and analyze such response. This paper introduces a computational method to analyze, track and store the hygroscopic response of wood through image analysis and continuous tracking of angular measurements in relation to time. This is done through a computational closed loop that links the smart material interface (SMI) representing hygroscopic response with a digital and tangible interface comprising a Flex sensor, Arduino kit, and FireFly plugin. Results show no significant difference between the proposed sensing mechanism and conventional image analysis tracking systems. Using the described method, acquiring real-time data can be utilized to develop learning mechanisms and predict the controlled motion of programmable material for adaptive architectural skins.
keywords	Hygroscopic properties of wood; Adaptive architecture; Programmable materials; Real-time tracking
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2006_paper8
id	ascaad2006_paper8
authors	Abdullah, Sajid; Ramesh Marasini and Munir Ahmad
year	2006
title	An Analysis of the Applications of Rapid Prototyping in Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Rapid prototyping (RP) techniques are widely used within the design/manufacturing industry and are well established in manufacturing industry. These digital techniques offer quick and accurate prototypes with relatively low cost when we require exact likeness to a particular scale and detail. 3D modeling of buildings on CAD-systems in the AEC sector is now becoming more popular and becoming widely used practice as the higher efficiency of working with computers is being recognized. However the building of scaled physical representations is still performed manually, which generally requires a high amount of time. Complex post-modernist building forms are more faithfully and easily represented in a solid visualization form, than they could be using traditional model making methods. Using RP within the engineering community has given the users the possibility to communicate and visualize designs with greater ease with the clients and capture any error within the CAD design at an early stage of the project or product lifecycle. In this paper, the application of RP in architecture is reviewed and the possibilities of modeling architectural models are explored. A methodology of developing rapid prototypes with 3D CAD models using methods of solid freeform manufacturing in particular Fused Deposition Modeling (FDM) is presented and compared against traditional model making methods. An economical analysis is presented and discussed using a case study and the potential of applying RP techniques to architectural models is discussed.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	41e5
authors	Abendroth, M., Decock, J. and Mestaoui, N.
year	2000
title	O_1:// the hypertextu(r)al matrix
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary	Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
wos	WOS:000402063700071
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	architectural_intelligence2022_6
id	architectural_intelligence2022_6
authors	Achim Menges, Fabian Kannenberg & Christoph Zechmeister
year	2022
title	Computational co-design of fibrous architecture
doi	https://doi.org/https://doi.org/10.1007/s44223-022-00004-x
source	Architectural Intelligence Journal
summary	Fibrous architecture constitutes an alternative approach to conventional building systems and established construction methods. It shows the potential to converge architectural concerns such as spatial expression and structural elegance, with urgently required resource effectiveness and material efficiency, in a genuinely computational approach. Fundamental characteristics of fibre composite are shared with fibre structures in the natural world, enabling the transfer of design principles and providing a vast repertoire of inspiration. Robotic fabrication based on coreless filament winding, a technique to deposit resin impregnated fibre filaments with only minimal formwork, as well as integrative computational design methods are imperative to the development of complex fibrous building systems. Two projects, the BUGA Fibre Pavilion as an example for long-span structures, and Maison Fibre as an example of multi-storey architecture, showcase the application of those techniques in an architectural context and highlight areas of further research opportunities. The highly interrelated aesthetic, structural and fabrication characteristics of fibre nets are difficult to understand and go beyond a designer’s comprehension and intuition. An AI powered, self-learning agent system aims to extend and thoroughly explore the design space of fibre structures to unlock the full design potential coreless filament winding offers. In order to ensure feedback between all relevant design and performance criteria and enable interdisciplinary convergence, these novel design methods are embedded in a larger co-design framework. It formalizes the interaction of involved interdisciplinary domains and allows for interactive collaboration based on a central data model, serving as a base for design optimisation and exploration. To further advance research on fibre composites in architecture, bio-based materials are considered, continuing the journey of discovery of fibrous architecture to fundamentally rethinking design and construction towards a novel, computational material culture in architecture.
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	cf2005_1_64_168
id	cf2005_1_64_168
authors	ACHTEN Henri
year	2005
title	Resolving some Ambiguities in Real-time Design Drawing Recognition by means of a Decision Tree for Agents
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 311-320
summary	In this paper, we present a theoretical study on automated understanding of the design drawing. This can lead to design support through the natural interface of sketching. In earlier work, 24 plan-based conventions of depiction have been identified, such as grid, zone, axial system, contour, and element vocabulary. These are termed graphic units. Graphic units form a good basis for recognition of drawings as they combine shape with meaning. We present some of the theoretical questions that have to be resolved before an implementation can be made. The contribution of this paper is: (i) identification of domain knowledge which is necessary for recognition; (ii) outlining combined strategy of multi-agent systems and online recognition; (iii) functional structure for agents and their organisation to converge on sketch recognition.
keywords	multi-agent system, decision tree, pattern recognition, sketch
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	eb8a
authors	Achten, H., De Vries, B. and Jessurun, J.
year	2000
title	DDDOOLZ. A Virtual Reality Sketch Tool for Early Design
doi	https://doi.org/10.52842/conf.caadria.2000.451
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 451-460
summary	This paper presents DDDoolz, a desktop-VR three-dimensional voxel sketchtool. DDDoolz is developed in the Design Systems Group to explore the use of Virtual Reality technology in the early design stage. The aim is to offer a sketch-like environment in VR with an unobtrusive interface. The paper presents DDDoolz, how it is used in education and with partners in architectural practice, and some future developments.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: