| id |
acadia19_198 |
| authors |
Tessmer, Lavender; Huang, Yijiang; Mueller, Caitlin |
| year |
2019 |
| title |
Additive Casting of Mass-Customizable Bricks |
| doi |
https://doi.org/10.52842/conf.acadia.2019.198
|
| source |
ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 198-207 |
| summary |
The strength of general-purpose fabrication tools is in the ease of repeatability and reconfiguration of geometry. However, there are some material processes that are difficult to directly integrate into fabrication processes with these machines. In particular, the common methods of material configuration through horizontal deposition in 3D printing exclude other types of material processes such as casting. This project demonstrates an additive manufacturing technique paired with a design input process for generating a wall of customized cast bricks. Taking advantage of the precision and adaptability of a robotic arm, the fabrication process pairs this general-purpose tool with a specialized auxiliary device to create variation in concrete casts. |
| series |
ACADIA |
| type |
normal paper |
| email |
|
| full text |
 file.pdf (6,245,000 bytes) |
| references |
Content-type: text/plain
|
Baudisch, Patrick, and Stefanie Mueller. (2017)
 Personal Fabrication
, Foundations and Trends® in Human–Computer Interaction 10 (3–4): 165–293. doi:10.1561/1100000055
|
|
|
|
|
Brown, Nathan C, and Caitlin T. Mueller. (2019)
Design Variable Analysis and Generation for Performance-Based Parametric Modeling in Architecture
, International Journal of Architectural Computing 17 (1): 36–52. doi:10.1177/1478077118799491
|
|
|
|
|
Buswell, R. A., W.R. Leal de Silva, S.Z. Jones, and J. Dirrenberger. (2018)
3D Printing Using Concrete Extrusion: A Roadmap for Research
, Cement and Concrete Research, SI: Digital Concrete 2018 112 (October): 37–49. doi:10.1016/j.cemconres.2018.05.006
|
|
|
|
|
Friedman, Jared, Heamin Kim, and Olga Mesa. (2014)
Experiments in Additive Clay Depositions
, Robotic Fabrication Architecture, Art and Design 2014, edited by Wes McGee and Monica Ponce de Leon, 261–72. Cham: Springer International Publishing. doi:10.1007/978-3-319-04663-1_18
|
|
|
|
|
Huang, Yijiang, Caelan R. Garrett, and Caitlin T. Mueller. (2018)
Automated Sequence and Motion Planning for Robotic Spatial Extrusion of 3D Trusses
, Construction Robotics 2 (1): 15–39. doi:10.1007/s41693-018-0012-z
|
|
|
|
|
Klein, John, Michael Stern, Giorgia Franchin, Markus Aurel Rasmus Kayser, Chikara Inamura, Shreya H. Dave, James Weaver, et al. (2015)
Additive Manufacturing of Optically Transparent Glass
, 3D Printing and Additive Manufacturing 2 (April). doi:10.1089/3dp.2015.0021
|
|
|
|
|
Peng, Huaishu, Rundong Wu, Steve Marschner, and François Guimbreti?re. (2016)
On-The-Fly Print: Incremental Printing While Modelling
, Proceedings of the 2016 CHI Conference on Human Factors Computing Systems, 887–896. CHI ’16. New York, NY, USA: ACM. doi:10.1145/2858036.2858106
|
|
|
|
|
Schulz, Adriana, Harrison Wang, Eitan Grinspun, Justin Solomon, and Wojciech Matusik. (2018)
Interactive Exploration of Design Trade-Offs
, ACM Trans. Graph. 37 (4): 131:1–131:14. doi:10.1145/3197517.3201385
|
|
|
|
|
Silver, Michael. (2018)
Robofutures: Rise of the Servant Zombies
, Towards a Robotic Architecture, edited by Mahesh Daas and Andrew John Wit. Novato, CA: Applied Research and Design Publishing.
|
|
|
|
|
Whiting, Emily, John Ochsendorf, and Frédo Durand. (2009)
Procedural Modeling of Structurally-Sound Masonry Buildings
, ACM SIGGRAPH Asia 2009 Papers, 112:1–112:9. SIGGRAPH Asia ’09. New York, NY, USA: ACM. doi:10.1145/1661412.1618458
|
|
|
|
|
Zhou, Yuqing, and Kazuhiro Saitou. (2018)
Gradient-Based Multi-Component Topology Optimization for Stamped Sheet Metal Assemblies (MTO-S)
, Struct. Multidiscip. Optim. 58 (1): 83–94. doi:10.1007/s00158-017-1878-y
|
|
|
|
|
Zivkovic, Sasa, and Christopher Battaglia. (2018)
Rough Pass Extrusion Tooling. CNC Post-Processing of 3D-Printed Sub-Additive Concrete Lattice Structures
, ACADIA 18: Recalibration; On Imprecisionand Infidelity; Proceedings of the 38th Annual Conference of the Association for Computer Aided Design Architecture, 302-311. Mexico City, Mexico 18-20 October, 2018. CUMINCAD. http://papers. cumincad.org/cgi-bin/works/paper/acadia18_302
|
|
|
|
| last changed |
2022/06/07 07:58 |
|
