| id |
acadia20_564 |
| authors |
Cutajar, Sacha; Costalonga Martins, Vanessa; van der Hoven, Christo; Baszyński, Piotr; Dahy, Hanaa |
| year |
2020 |
| title |
Towards Modular Natural Fiber-Reinforced Polymer Architecture |
| source |
ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 564-573. |
| doi |
https://doi.org/10.52842/conf.acadia.2020.1.564
|
| summary |
Driven by the ecological crisis looming over the 21st century, the construction sector must urgently seek alternative design solutions to current building practices. In the wake of emergent digital technologies and novel material strategies, this research proposes a lightweight architectural solution using natural fiber-reinforced polymers (NFRP), which elicit interest for their inherent renewability as compared to high-performance yarns. Two associated fabrication techniques are deployed: tailored fiber placement (TFP) and coreless filament winding (CFW), both favored for their additive efficiencies granted by strategic material placement. A hypothesis is formed, postulating that their combination can leverage the standalone complexities of molds and frames by integrating them as active structural elements. Consequently, the TFP enables the creation of a 2D stiffness-controlled preform to be bent into a permanent scaffold for winding rigid 3D fiber bodies via CFW. A proof of concept is generated via the small-scale prototyping and testing of a stool, with results yielding a design of 1 kg capable of carrying 100 times its weight. Laying the groundwork for a scaled-up architectural proposal, the prototype instigates alterations to the process, most notably the favoring of a modular global design and lapped preform technique. The research concludes with a discussion on the resulting techno-implications for automation, deployment, material life cycle, and aesthetics, rekindling optimism towards future sustainable practices. |
| series |
ACADIA |
| type |
paper |
| email |
|
| full text |
 file.pdf (5,119,661 bytes) |
| references |
Content-type: text/plain
|
Abergel, Thibaut, Brian Dean, and John Dulac (2017)
 Towards a Zero-Emission, Efficient, and Resilient Buildings and Construction Sector: Global Status Report 2017
, Paris: UN Environment and International Energy Agency
|
|
|
|
|
Aldinger, Lotte, Georgia Margariti, Axel Körner, Seiichi Suzuki, and Jan Knippers (2018)
Tailoring Self-Formation Fabrication and Simulation of Membrane-Actuated Stiffness Gradient Composites
, Proceedings of IASS Annual Symposia, 1–8. International Association for Shell and Spatial Structures (IASS)
|
|
|
|
|
Costalonga Martins, Vanessa, Sacha Cutajar, Christo van der Hoven, Piotr Baszyński, and Hanaa Dahy (2020)
FlexFlax Stool: Validation of Moldless Fabrication of Complex Spatial Forms of Natural Fiber-Reinforced Polymer (NFRP) Structures through an Integrative Approach of Tailored Fiber Placement and Coreless Filament Winding Techniques
, Applied Sciences 10 (9): 3278
|
|
|
|
|
Dahy, Hanaa, Jan Petrš, and Piotr Baszyński (2020)
Biocomposites from Annually Renewable Resources Displaying Vision of Future Sustainable Architecture Design and Fabrication of Two 1:1 Demonstrators
, Fabricate 2020: Making Resilient Architecture, edited by J. Burry, J. Sabin, B. Sheil, and M. Skavara, 66–73. London: UCL Press
|
|
|
|
|
Felbrich, Benjamin, Nikolas Frueh, Marshall Prado, Saman Saffarian, James Solly, Lauren Vasey, Jan Knippers, and Achim Menges (2017)
Multi-Machine Fabrication: An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long Span Composite Structures
, ACADIA 2017: Disciplines and Disruption [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)], Cambridge, MA, 2–4 November 2017, edited by T. Nagakura, S. Tibbits, M. Ibanez, and C. Mueller, 248–259. CUMINCAD
|
|
|
|
|
Herakovich, Carl T (2012)
Composite Materials: Lamination Theory
, Wiley Encyclopedia of Composites, edited by L. Nicolais, 1–5. John Wiley & Sons
|
|
|
|
|
Knippers, Jan, Achim Menges, Hanaa Dahy, Nikolas Früh, Abel Groenewolt, Axel Körner, Katja Rinderspacher et al (2018)
The ITECH Approach: Building (s) to Learn
, Proceedings of IASS Annual Symposia, 1–8. International Association for Shell and Spatial Structures (IASS)
|
|
|
|
|
Menges, Achim, and Jan Knippers (2015)
Fibrous Tectonics
, Architectural Design 85 (5): 40–47
|
|
|
|
|
Pallasmaa, Juhani (2012)
The Eyes of the Skin: Architecture and the Senses
, John Wiley & Sons
|
|
|
|
|
Pickering, K. L., M. G. Aruan Efendy, and T. M. Le (2016)
A Review of Recent Developments in Natural Fibre Composites and Their Mechanical Performance
, Composites Part A: Applied Science and Manufacturing, Special Issue on Biocomposites, 83 (April): 98–112
|
|
|
|
|
Prado, Marshall, Moritz Dorstelmann, Tobias Schwinn, Achim Menges, and Jan Knippers (2014)
Core-Less Filament Winding: Robotically Fabricated Fiber Composite Building Components
, Robotic Fabrication in Architecture, Art and Design 2014, edited by Wes McGee and Monica Ponce de Leon, 275–289. Cham, Switzerland: Springer
|
|
|
|
|
Rana, Sohel, and Raul Fangueiro (2016)
Fibrous and Textile Materials for Composite Applications
, Cham, Switzerland: Springer
|
|
|
|
|
Rihaczek, Gabriel, Maximilian Klammer, Okan Başnak, Jan Petrš, Benjamin Grisin, Hanaa Dahy, Stefan Carosella, and Peter Middendorf (2020)
Curved Foldable Tailored Fiber Reinforcements for Moldless Customized Bio-Composite Structures. Proof of Concept: Biomimetic NFRP Stools
, Polymers 12 (9): 2000
|
|
|
|
|
Semper, Gottfried (2004)
Style in the Technical and Tectonic Arts, or, Practical Aesthetics
, Getty Publications
|
|
|
|
|
Spuybroek, Lars (2016)
The Sympathy of Things: Ruskin and the Ecology of Design
, Bloomsbury Publishing
|
|
|
|
|
Yablonina, Maria, and Achim Menges (2019)
Towards the Development of Fabrication Machine Species for Filament Materials
, Robotic Fabrication in Architecture, Art and Design 2018, edited by Jan Willmann, Philippe Block, Marco Hutter, Kendra Byrne, and Tim Schork, 152–166. Cham: Springer
|
|
|
|
|
Zechmeister, Christoph, Serban Bodea, Niccolo Dambrosio, and Achim Menges (2019)
Design for Long-Span Core-Less Wound, Structural Composite Building Elements
, Impact: Design With All Senses, edited by Christoph Gengnagel, Olivier Baverel, Jane Burry, Mette Ramsgaard Thomsen, and Stefan Weinzierl, 401–415. Cham: Springer
|
|
|
|
| last changed |
2023/10/22 12:06 |
|
