| id |
acadia21_194 |
| authors |
Robby, Klara; Erik, Kraft; Rupert, Demaine; Riccardo, Maleczek; Tomohiro, Foschi; , Tachi |
| year |
2021 |
| title |
Lotus: A curved folding design tool for Grasshopper |
| source |
ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 194-203. |
| doi |
https://doi.org/10.52842/conf.acadia.2021.194
|
| summary |
Curved-crease origami design is a novel area of research with applications in fields such as architecture, design, engineering, and fabrication ranging between micro and macro scales. However, the design of such models is still a difficult task which requires preserving isometry between the 3D form and 2D unfolded state. This paper introduces a new software tool for Rhino/Grasshopper for interactive computational curved-crease origami design. Using a rule-line based approach, this tool has two functions: rigid-ruling bending of a flat sheet, and a patch-by-patch additive construction method for cylindrical and conical surfaces along curved creases. |
| series |
ACADIA |
| type |
paper |
| email |
kmundil@mit.edu |
| full text |
 file.pdf (3,357,416 bytes) |
| references |
Content-type: text/plain
|
Cheng-Cheng Tang, Po Bo, Johannes Wallner, and Helmut Pottmann (2016)
 Interactive design of developable surfaces
, ACM Trans. Graph. 35 (2): 12:1–12:12
|
|
|
|
|
Duks Koschitz (2016)
Designing with curved creases.
, Advances in Architectural Geometry 2016, 82–103
|
|
|
|
|
Erik Demaine, Martin Demaine, Duks Koschitz, Tomohiro Tachi (2015)
A review on curved creases in art, design and mathematics
, Symmetry: Culture and Science 26 (2): 145–161
|
|
|
|
|
Georg Glaeser and F. Gruber (2007)
Developable surfaces in contemporary architecture
, Journal of Mathematics and the Arts 1 (3): 59–71
|
|
|
|
|
Helmut Pottmann, Andras Asperl, Michael Hofer, and Axel Kilian (2011)
Architectural Geometry
, Springer & Bentley Institute Press
|
|
|
|
|
Julian Lienhard (2014)
Bending-active structures: form-finding strategies using elastic deformation in static and kinetic systems and the structural potentials therein
, PhD thesis, Stuttgart,
|
|
|
|
|
Julie Chalfant (1997)
Analysis and design of developable surfaces for shipbuilding
, MSc Thesis, Massachusetts Institute of Technology
|
|
|
|
|
Jun Mitani, and T. Igarashi (2011)
Interactive Design of Planar Curved Folding by Refection
, Proceedings of the Pacific Conference on Computer Graphis and Applications. 77–81
|
|
|
|
|
Justin Solomon, Etienne Vouga, Max Wardetzky and Eitan Grinspun (2012)
Flexible developable surfaces
, Computer Graphics Forum 31 (5): 1567–1576
|
|
|
|
|
Klara Mundilova, and Tony Wills (2018)
Folding the Vesica Piscis
, Proceedings of the 21st Annual Conference of BRIDGES: Mathematics, Music, Art, Architecture, Culture. 535–538
|
|
|
|
|
Klara Mundilova (2019)
On mathematical paper-folding: Sliding developables and parametrizations of folds into cylinders and cones
, Computer-Aided Design 10: 34–41
|
|
|
|
|
Martin Kilian, Simon Flöry, Zhonggui Chen, Niloy Mitra, Alla Sheffer, and Helmut Pottmann (2008)
Curved folding
, ACM Transactions on Graphics (TOG) 27 (3): 1–9
|
|
|
|
|
Michael Rabinovich, Tim Hoffmann, Olga Sorkine-Hornung (2018)
Discrete geodesic nets for modeling developable surfaces
, ACM Trans. Graph. 37 (2): 16:1–16:17
|
|
|
|
|
Michael Rabinovich, Tim Hoffmann, Olga Sorkine-Hornung (2019)
Modeling curved folding with freeform deformations
, ACM Trans. Graph. 38 (6): 170:1–170:12
|
|
|
|
|
Riccardo Foschi, Robby Kraft, Rupert Maleczek, Klara Mundilova and Tomohiro Tachi (2021)
How to use parametric curved folding design methods – a case study and comparison
, To appear in Proceedings of the IASS Annual Symposium 2020/21
|
|
|
|
|
Robert Lang (2018)
Twists, Tilings and Tessellations: Mathematical Methods for Geometric Origami
, Natick, Mass.: A K Peters, Limited/ CRC Press
|
|
|
|
|
Rupert Maleczek, Gabriel Stern, Astrid Metzler and Clemens Preisinger (2019)
Large Scale Curved Folding Mechanisms
, Impact: Design with all Senses; Proceedings of the Design Modelling Symposium, Berlin 2019. 539–553
|
|
|
|
|
Rupert Maleczek, Klara Mundilova, and Tomohiro Tachi (2021)
Curved Crease Edge Rounding of Polyhedral Surfaces
, Advances in Architectural Geometry 2020. 131–153
|
|
|
|
|
Shajay Bhooshan, El-Sayed Mustafa, and Chandra Surajansh (2014)
Design-Friendly Strategies for Computational Form-Finding of Curved Folded Geometries: A Case Study
, Proceedings of the Symposium on Simulation for Architecture & Urban Design. San Diego: Society for Computer Simulation International. 117–124
|
|
|
|
|
Snezana Lawrence (2011)
Developable surfaces: Their history and application
, Nexus Network Journal 13 (3): 701–714
|
|
|
|
| last changed |
2023/10/22 12:06 |
|
