| id |
acadia22_356 |
| authors |
Leschok, Matthias; Dillenburger, Benjamin |
| year |
2022 |
| title |
3D Printed Formwork for Mycelium Bound Composites |
| source |
ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 356-365. |
| summary |
This paper presents investigations on 3D printed formwork for MBC using different polymers. The method is demonstrated via two large-scale prototypes, and major findings are critically discussed. It is shown that different polymer materials can be used for growing MBC, and that the choice of material affects the final component. The research aims to promote the creation of low-embodied energy and fully biodegradable building components by exploring 3D printed formwork for mycelium-bound composites. |
| series |
ACADIA |
| type |
paper |
| email |
|
| full text |
 file.pdf (5,018,621 bytes) |
| references |
Content-type: text/plain
|
A. Ghazvinian, and B. Gürsoy (2022)
 Mycelium-Based Composite Graded Materials: Assessing the Effects of Time and Substrate Mixture on Mechanical Properties
, Biomimetics 7 (2): 48
|
|
|
|
|
A. Jipa, C. Calvo Barentin, G. Lydon, M. Rippmann, M. Lomaglio, A. Schlüter, and P. Block (2019)
3D-Printed Formwork for Integrated Funicular Concrete Slabs
, Proceedings of the IASS AnnualSymposium 2019 – Structural Membranes 2019. Barcelona, Spain
|
|
|
|
|
A. Jipa, F. Giacomarra, R. Giesecke, G. Chousou, M. Pacher, B. Dillenburger, M. Lomaglio, and M. Leschok (2019)
3D-Printed Formwork for Bespoke Concrete Stairs: From Computational Design to Digital Fabrication
, Proceedings of the ACM Symposium onComputational Fabrication. Pittsburgh Pennsylvania: ACM. 1–12
|
|
|
|
|
A. Van Wylick, E. Elsacker, L. L. Yap, E. Peeters, and L. De Laet (2022)
Mycelium Composites and Their Biodegradability: An Exploration on the Disintegration of Mycelium-Based Materials in Soil
, ConstructionTechnologies and Architecture 1: 652–659
|
|
|
|
|
D. Correa, A. Papadopoulou, C. Guberan, N. Jhaveri, S. Reichert, A. Menges, and S. Tibbits (2015)
3D-Printed Wood: Programming Hygroscopic Material Transformations
, 3D Printing and AdditiveManufacturing 2 (3): 106–16
|
|
|
|
|
E. Elsacker, A. Sondergaard, A. Van Wylick, E. Peeters, and L. De Laet (2021)
Growing Living and Multifunctional Mycelium Composites for Large-Scale Formwork Applications Using Robotic Abrasive Wire- Cutting
, Construction and Building Materials 283 (May): 122732
|
|
|
|
|
E. Elsacker, S. Vandelook, A. Van Wylick, J. Ruytinx, L. De Laet, and E. Peeters (2020)
A Comprehensive Framework for the Production of Mycelium-Based Lignocellulosic Composites
, Science of The TotalEnvironment 725 (July): 138431
|
|
|
|
|
E. Karana, D. Blauwhoff, E.-J. Hultink, and S. Camere (2018)
When the Material Grows: A Case Study on Designing (with) Mycelium-Based Materials
, International Journal of Design 12 (2): 119–136
|
|
|
|
|
E. Özdemir, L. Kiesewetter, K. Antorveza, T. Cheng, S. Leder, D. Wood, and A. Menges (2022)
Towards Self-Shaping Metamaterial Shells: A Computational Design Workflow for Hybrid Additive Manufacturing of Architectural Scale Double-Curved Structures
, Proceedings of the 2021 DigitalFUTURES. Singapore: Springer Singapore. 275–285
|
|
|
|
|
F. Heisel, J. Lee, K. Schlesier, M. Rippmann, N. Saeidi, A. Javadian, A. Reza Nugroho, T. Van Mele, P. Block, and D. E. Hebel (2017)
MYCOTREE Design, Cultivation and Application of Load-Bearing Mycelium Components: The MycoTree at the 2017 Seoul Biennale of Architecture and Urbanism
, International Journal of Sustainable EnergyDevelopment 6 (1): 296–303
|
|
|
|
|
G. V. Angelova, M. S. Brazkova, and A. I. Krastanov (2021)
Renewable Mycelium Based Composite, Sustainable Approach for Lignocellulose Waste Recovery and Alternative to Synthetic Materials: A Review
, Zeitschrift Für Naturforschung C 76 (11–12): 431–42
|
|
|
|
|
J. Burger, E. Lloret-Fritschi, F. Scotto, T. Demoulin, L. Gebhard, J. Mata-Falcón, F. Gramazio, M. Kohler, and R. J. Flatt (2020)
Eggshell: Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
, 3D Printing and Additive Manufacturing 7 (2): 48–59
|
|
|
|
|
Jonathan Dessi-Olive (2019)
Monolithic Mycelium: Growing Vault Structures
, Construction Materials & Technologies for Sustainability. 18th International Conference. Nairobi, Kenya
|
|
|
|
|
M Mungenast (2017)
Fluid Morphology; 3D-Printed Functional Integrated Building Envelope
, Proceedings of the 12th Conference ofAdvanced Building Skins. Bern, Switzerland. 109–24
|
|
|
|
|
M. L. Hallensleben, R. Fuss, and F. Mummy (2015)
Polyvinyl Compounds, Others
, Ullmann’s Encyclopedia of Industrial Chemistry. Weinheim, Germany: Wiley-VCH Verlag. 1–23
|
|
|
|
|
M. Leschok, and B. Dillenburger (2019)
Dissolvable 3DP Formwork; Water-Dissolvable 3D Printed Thin-Shell Formwork for Complex Concrete Components
, ACADIA 19: Ubiquity and Autonomy,Proceedings of the Association for Computer Aided Design inArchitecture. University of Texas, Austin. 188–197
|
|
|
|
|
M. Leschok, and B. Dillenburger (2020)
Sustainable Thin-Shell 3D Printed Formwork for Concrete
, Impact: Design With All Senses. Cham: Springer International Publishing. 487–501
|
|
|
|
|
N. De Belie, E. Gruyaert, A. Al-Tabbaa, P. Antonaci, C. Baera, D. Bajare, A. Darquennes, et al (2018)
A Review of Self-Healing Concrete for Damage Management of Structures
, Advanced Materials Interfaces 5(17): 1800074
|
|
|
|
|
N. Oxman, J. Laucks, M. Kayser, and C. D. Gonzalez Uribe (2013)
Biological Computation for Digital Design and Fabrication
, Computation and Performance (International Conference of eCAADe). Delft: eCAADe and Delft University of Technology. 585–594
|
|
|
|
|
P. Loh, M. Qu, and D. Leggett (2020)
Future Prototyping: Catalogue: Architecture, Art, Engineering, Culture, Fashion
, Melbourne, Australia: Melbourne School of Design, the University of Melbourne
|
|
|
|
| last changed |
2024/02/06 14:00 |
|
