| id |
caadria2016_589 |
| authors |
Grigoriadis, Kostas |
| year |
2016 |
| title |
Translating Digital to Physical Gradients |
| doi |
https://doi.org/10.52842/conf.caadria.2016.589
|
| source |
Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 589-598 |
| summary |
As the practice of using notations to translate from two to three-dimensions is becoming superseded by the direct relaying of building information digitally, the separation between designing and building is diminishing. A key aspect in lessening further this divi- sion, is heterogeneous materiality that supersedes component thinking and effectively tectonics. Being an embodiment of the redundancies of tectonic assembly, a curtain wall detail has been redesigned with a heterogeneous and continuous multi-material using CFD. The main research problem following this redesign has been the conversion of material data from the CFD program into a 3D-printable format and in order to achieve a closer linkage between design and building. This has been pursued by initially converting the fused material parameters into fluid weight data and eventually into RGB colour values. The re- sulting configuration was output initially as a multi-colour print and effectively fabricated in a multi-material. |
| keywords |
Multi-materials; CFD; 3D-printing; autography |
| series |
CAADRIA |
| email |
|
| full text |
 file.pdf (31,734,462 bytes) |
| references |
Content-type: text/plain
|
Carpo, M. (2011)
 The Alphabet and the Algorithm (Writing Architecture)
, MIT Press, Cambridge, Mass
|
|
|
|
|
Gordon, J. E. (1988)
The Science of Structures and Materials
, Scientific American Library, New York
|
|
|
|
|
Grigoriadis, K. (2015)
Simulating fusion: an epistemological analysis of a new design tool for an imminent multi-material future
, M. Tamke, et al (eds), Modelling Behaviour: Design Modelling Symposium 2015, Springer, Switzerland, 283-294
|
|
|
|
|
Mahboob, H., Sajjadi, S. A. and Zebarjad, S. M. (2008)
Synthesis of Al-Al2O3 Nano-Composite by Mechanical Alloying and Evaluation of the Effect of Ball Milling Time on the Microstructure and Mechanical Properties
, ICMN08 2008: International Conference on MEMS & Nanotechnology, Kuala Lumpur, 240-245
|
|
|
|
|
Yu, C. L., Wang, X. F., Tong, X., Jiang, H. T. and Wang, G. W. (2007)
Integrated Liquid-Phase Sintering of Glass-Alumina Functionally Graded Materials
, Science of Sintering, 39(2), 133-144
|
|
|
|
| last changed |
2022/06/07 07:51 |
|
