| id |
caadria2019_221 |
| authors |
Ladron de Guevara, Manuel, Borunda, Luis, Ficca, Jeremy, Byrne, Daragh and Krishnamurti, Ramesh |
| year |
2019 |
| title |
Robotic Free-Oriented Additive Manufacturing Technique for Thermoplastic Lattice and Cellular Structures |
| doi |
https://doi.org/10.52842/conf.caadria.2019.2.333
|
| source |
M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 333-342 |
| summary |
This paper presents a novel Additive Manufacturing application of situated Robotic Fused Deposition Modeling (RFDM) for thermoplastic cellular and lattice structures, called Free-Oriented Additive Manufacturing (FOAM), to accommodate variations in spatial conditions, deposition direction, and geometry in order to adapt to complex infrastructure settings, thus, breaking the conventional layer-by-layer stacking principle and the constant constraint of locking the tip of the nozzle to the negative Z direction when fabricating at an architectural scale. |
| keywords |
Robotic 3D Printing; Situated Fused Deposition; Thermoplastic Lattice Structures |
| series |
CAADRIA |
| email |
|
| full text |
 file.pdf (13,626,773 bytes) |
| references |
Content-type: text/plain
|
Ackoff, R.L. (1974)
 Redesigning the future
, Proceedings of an IFORS Specialized Conference on Operational Research and the Social Sciences, New York, p. 29
|
|
|
|
|
Blonder, A. and Grobman, Y.J. (2015)
Design and fabrication with fibre-reinforced polymers in architecture: a case for complex geometry.
, Architectural Science Review, 59, pp. 257-268
|
|
|
|
|
Bock, T. (2015)
The future of construction automation: Technological disruption and the upcoming ubiquity of robotics.
, Automation in Constructiotn, 59, pp. 113-121
|
|
|
|
|
Carpo, M. (2017)
The Second Digital Turn: Design Beyond Intelligence
, MIT Press
|
|
|
|
|
Felbrich, B., Wulle, F., Allgaier, C., Menges, A. and Verl, A. (2018)
A novel rapid additive manufacturing concept for architectural composite shell construction inspired by the shell formation in land snails
, Bioinspiration & biomimetics, 13(2), p. 26010
|
|
|
|
|
Garcia de Soto, B.G., Agustí-Juan, I., Hunhevicz, J., Graser, K., Habert, G. and Adey, B.T. (2018)
Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall
, Automation in Constructiotn, 92, pp. 297-311
|
|
|
|
|
Haas, C., Skibniewski, M. and Budny, E. (1995)
Robotics in civil enegineering
, Microcomputers in Civil Engineering, 10, pp. 371-381
|
|
|
|
|
Hack, NH, Lauer, WVL, Gramazio, FG and Kohler, MK (2014)
Mesh Mould: Differentiation for Enhanced Performance
, Proceedings of CAADRIA 2014, Hong Kong, pp. 139-148
|
|
|
|
|
Huang, Y., Carstensen, J., Tessmer, L. and Mueller, C. (2018)
Robotic Extrusion of Architectural Structures with Nonstandard Topology
, ROBARCH 2018, Zurich, pp. 377-389
|
|
|
|
|
Jimenez Garcia, M., Retsin, G. and Soler, V. (2017)
A Generalized Approach to Non- Layered Fused Filament Fabrication
, ACADIA 2017, pp. 562-571
|
|
|
|
|
Kwon, H., Eichenhofer, M., Kyttas, T. and Dillenburger, B. (2018)
Digital Composites: Robotic 3D Printing of Continuous Carbon Fiber-Reinforced Plastics for Functionally-Graded Building Components
, Robotic Fabrication in Architecture, Art and Design, pp. 363-376
|
|
|
|
|
Liu, S., Li, Y. and Li, N. (2018)
A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures
, Materials and Design, 137, pp. 235-244
|
|
|
|
|
Mitchell, A., Lafont, U., Holynska, M. and Semprimoschnig, C. (2018)
Additive Manufacturing-A Review of 4D Printing and Future Applications
, Additive Manufacturing, 24, pp. 606-626
|
|
|
|
|
Mueller, S., Im, S., Gurevich, S., Teibrich, A., Pfisterer, L., Guimbreti?re, F. and Baudisch, P. (2014)
WirePrint: 3D Printed Previews for Fast Prototyping
, Proceedings of the 27th annual ACM symposium on User interface software and technology - UIST, Honolulu, pp. 273-280
|
|
|
|
|
Ngo, T., Kashani, A., Imbalzano, G., Nguyen, K.T.G. and Hui, D. (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
, Composites Part B: Engineering, 143, pp. 172-196
|
|
|
|
|
Oxman, N., Laucks, J., Kayser, M., Tsai, E. and Firstenberg, E. (2013)
Freeform 3D printing: Towards a Sustainable Approach to Additive Manufacturing
, Green Design, Materials and Manufacturing Processes, 479, pp. 479-483
|
|
|
|
|
Oxman, R. (2008)
Digital architecture as a challenge for design pedagogy: theory, knowledge, models and medium
, Design Studies, 29, pp. 99-120
|
|
|
|
|
Tam, K. and Mueller, C. (2017)
Additive Manufacturing Along Principal Stress Lines
, 3D Printing and Additive Manufacturing, 4, pp. 63-81
|
|
|
|
|
Warszawski, A. (1984)
Application of Robotics to Building Construction
, Proceedings of the 1st International Symposium on Automation and Robotics in Construction (ISARC)
|
|
|
|
|
Willmann, J., Gramazio, F., Kohler, M. and Langenberg, S. (2013)
Digital by Material
, Rob|Arch 2012, Vienna, pp. 12-27
|
|
|
|
| last changed |
2022/06/07 07:52 |
|
