| id |
caadria2019_658 |
| authors |
Lange, Christian and Holohan, Donn |
| year |
2019 |
| title |
CeramicINformation Pavilion - Rethinking structural brick specials through an indexical 3D printing method |
| doi |
https://doi.org/10.52842/conf.caadria.2019.1.103
|
| source |
M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 103-112 |
| summary |
Complex brick construction is defined by its relationship to labor; it requires skilled workers in planning, manufacturing and assembly. In the modern era, this has been perceived as a significant drawback, and as such has resulted in brick construction being partially superseded by more rapid methods of fabrication, despite its inherent robustness and longevity. This paper describes the second stage of an ongoing research project which attempts to revitalize the material system of the brick special through the development of an intelligent 3d printing method that works in conjunction with a layman assembly procedure for a new class of self-supporting nonstandard brick structures. In this project, an indexed and geometrically informed jointing system, together with a parametric and digital workflow, enables rapid assembly on site without a requirement for complex site setup or skilled labor. |
| keywords |
Digital Fabrication; 3D clay printing; Brick Specials; Computational Design |
| series |
CAADRIA |
| email |
cjlange@hku.hk |
| full text |
 file.pdf (14,801,358 bytes) |
| references |
Content-type: text/plain
|
Bechthold, M, Seibold, Z, K, Hinz, Garcia del Castillo y Lopez, JL, Alonso, N and Mhatre, S (2018)
 Ceramic Morphologies
, Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture, ACADIA 2018, Mexico, pp. 351-358
|
|
|
|
|
Feringa, J (2014)
Entrepreneurship in architectural robotics - the simultaneity of craft, economics and design
, AD, Made by robots, 229, pp. 60-65
|
|
|
|
|
McGee, W and Ponce de Leon, M (2014)
Introduction to Rob Arch 2014
, McGee, W and Ponce de Leon, M (eds), Rob Arch 2014, Robotic Fabriction in Architecture, Art and Design, Springer Wien New York, pp. vii-x
|
|
|
|
|
Peters, B (2014)
Building Bytes: 3D-printed bricks
, Gramazio, F, Kohler, M and Langenberg, M (eds), Fabricate: Negotiating Design & Making, gta Verlag, Zurich, pp. 112-119
|
|
|
|
|
Rael, R and San Fratello, V (eds) (2018)
Printing Architecture: Innovative Recipes for 3D Printing
, Princeton Architectural Press
|
|
|
|
|
Rael, R and San Fratello, V (2017)
Clay Bodies: Crafting the Future with 3D Printing
, AD, Architectural Design, 3D Printed Body Architecture, 87(6), pp. 92-97
|
|
|
|
| last changed |
2022/06/07 07:52 |
|
