| id |
caadria2019_664 |
| authors |
Zhou, Yifan, Zhang, Liming, Wang, Xiang, Chen, Zhewen and Yuan, Philip F. |
| year |
2019 |
| title |
Exploration of Computational Design and Robotic Fabrication with Wire-Arc Additive Manufacturing Techniques |
| source |
M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 143-152 |
| doi |
https://doi.org/10.52842/conf.caadria.2019.1.143
|
| summary |
This paper discussed the exploration of computational design and robotic fabrication with Wire-Arc Additive Manufacturing techniques in a robotic metal printing workshop in Digital Futures 2018. Based on the previous research on structural-performance based design and robotic fabrication, this year's workshop mainly focused on the Wire-Arc Additive Manufacturing techniques and its possible outcomes. A prototype chair was tested for preparation. And the final target of the workshop was to build a bridge about 11m across the river. Through this metal printed bridge project, several computational optimization methods were applied to fulfill the final design. And Wire-Arc Additive Manufacturing techniques with robotic fabrication were carried out during the fabrication process. |
| keywords |
computational design; robotic fabrication; wire-arc additive manufacturing techniques |
| series |
CAADRIA |
| email |
|
| full text |
 file.pdf (7,935,296 bytes) |
| references |
Content-type: text/plain
|
JOOSTEN, S (2015)
 Printing a stainless steel bridge: An exploration of structural properties of stainless steel additive manufactures for civil engineering purposes
, Master's Thesis, TUD
|
|
|
|
|
MURR, LE, RAMIREZ, SM, RAMIREZ, DA, MARTINEZ, E, HERNANDEZ, J, AMATO, KN, SHINDO, PW, MEDINA, FR and WICKER, RB (2012)
Metal fabrication by additive manufacturing using laser and electron beam melting technologies
, Journal of Materials Science & Technology, 28, pp. 1-14
|
|
|
|
|
WILLIAMS, SW, MARTINA, F, ADDISON, AC, DING, J, PARDAL, G and COLEGROVE, P (2016)
Wire+ arc additive manufacturing
, Materials Science and Technology, 24, p. 118
|
|
|
|
|
WOHLERS, T and GORNET, T (2014)
History of additive manufacturing
, Wohlers report, 24, p. 118
|
|
|
|
|
YUAN, PF, CHEN, Z and ZHANG, L (2018)
FORM FINDING FOR 3D PRINTED PEDESTRIAN BRIDGES
, Proceedings of the 23rd International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA) 2018
|
|
|
|
| last changed |
2022/06/07 07:57 |
|
