| id |
caadria2020_037 |
| authors |
Yoon, Jungwon and Choi, Seok-won |
| year |
2020 |
| title |
Thermo-Shading - Digital Design and Additive Manufacturing of SMP Prototypes |
| doi |
https://doi.org/10.52842/conf.caadria.2020.1.035
|
| source |
D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 35-44 |
| summary |
We present results on the development of an intelligent and informed SMP prototypes, as proof-of-concept models to assess applicability of thermo-responsive materials in adaptive façades. SMP has the intrinsic properties to detect environmental heat changes and react by changing its form into memorized shapes. Among different morphology and deformation behaviours of SMP components, this design-to-fabrication study focuses on design and 3D printing fabrication of prototypes. Additionally, casting was tested to validate the rapid prototyping of additive manufacturing. Furthermore, two different activation systems of SMP were presented to compare mechanisms between a surface-active system and an actuator system. |
| keywords |
SMP; AM; thermo-responsive |
| series |
CAADRIA |
| email |
|
| full text |
 file.pdf (7,568,454 bytes) |
| references |
Content-type: text/plain
|
Arun, D.I., Chakravarthy, P., Arochia Kumar, R. and Santhosh, B (eds) (2018)
 Shape Memory Materials
, CRC Press
|
|
|
|
|
Chang, TW, Huang, HY and Datta, S (2019)
Design and fabrication of a responsive carrier component envelope
, Buildings, 9(84), pp. 1-14
|
|
|
|
|
Chun, J, Lee, J and Park, D (2018)
TOPO-JOINT: Topology Optimization Framework for 3D-Printed Building Joints
, Learning, Adapting and Prototyping, Proceedings of the 23rd International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA) 2018, pp. 205-214
|
|
|
|
|
Correa, D, Papadopoulou, A, Guberan, C, Jhaveri, N, Reichert, S, Menges, A and Tibbits, S (2015)
3D-Printed Wood: Programming Hygroscopic Material Transformations
, 3D Printing and Additive Manufacturing, 2(3), pp. 106-116
|
|
|
|
|
Dritsas, S, Vijay, Y, Teo, R, Halim, S, Sanandiya, N and Ferenandez, JG (2019)
Additive manufacturing with natural composites: From material intelligence to informed digital fabrication
, Intelligent & Informed, Proceedings of the 24th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA) 2019, pp. 263-272
|
|
|
|
|
Gao, W, Zhang, Y, Ramanujan, D, Ramani, K, Chen, Y, Williams, CB, Wang, CC, Shin, YC, Zhang, S and Zavattieri, PD (2015)
The status, challenges, and future of additive manufacturing in engineering
, CAD Computer Aided Design, 69, pp. 65-89
|
|
|
|
|
Garcia Rosales, CA, Kim, H, Garcia Duarte, MF, Chavez, L, Casta\~neda, M, Tseng, TLB and Lin, Y (2019)
Characterization of shape memory polymer parts fabricated using material extrusion 3D printing technique
, Rapid Prototyping Journal, 25(2), pp. 322-331
|
|
|
|
|
Ge, Qi, Sakhaei, Amir Hosein, Lee, Howon, Dunn, Conner K., Fang, Nicholas X. and Dunn, Martin L. (2016)
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
, Scientific Reports, 6(July), pp. 1-11
|
|
|
|
|
Gupta, SS, Jayashankar, DK, Sanandiya, ND, Ferenandez, JG and Tracy, K (2019)
Prototyping of chitosan-based shape-changing structures
, Intelligent & Informed, Proceedings of the 24th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA) 2019, pp. 441-450
|
|
|
|
|
Kolarevic, B (2004)
Back to the Future: Performative Architecture
, International Journal of Architectural Computing, 2(1), pp. 43-50
|
|
|
|
|
Lee, AY, An, J and Chua, CK (2017)
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
, Engineering, 3(5), pp. 663-674
|
|
|
|
|
Lienhard, J, Poppinga, S, Masselter, T, Milwish, M, Speck, T and Knippers, J (2011)
Flectofin: A hingeless flapping mechanism inspired by nature
, Bioinspiration and Biomimetics, 6(4), pp. 1-7
|
|
|
|
|
Loonen, R.C.G.M., Trcka, M, Costola, D and Hansen, J.L.M. (2013)
Climate adaptive building shells: State-of-the-art and future challenges
, Renewable and Sustainable Energy Reviews, 25, pp. 483-493
|
|
|
|
|
Mitchell, A, Lafont, U, Holynska, M and Semprimoschnig, C (2018)
Additive manufacturing - A review of 4D printing and future applications
, Additive Manufacturing, 24(October), pp. 606-626
|
|
|
|
|
Thompson, MK, Moroni, G, Vaneker, T, Fadel, G, Campbell, RI, Gibson, I, Bernard, A, Schulz, J, Graf, P, Ahuja, B and Martina, F (2016)
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
, CIRP Annals - Manufacturing Technology, 65(2), pp. 737-760
|
|
|
|
|
Tibbits, S. (2014)
4D printing: Multi-material shape change
, Architectural Design, 84(1), pp. 116-121
|
|
|
|
|
Tofail, SA, Koumoulos, EP, Bandyopadhyay, A, Bose, S, O'Donoghue, L and Charitidis, C (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
, Materials Today, 21(1), pp. 22-37
|
|
|
|
|
Yoon, J (2018)
Climate-adaptive Facade Design with Smart Materials : Evaluation and Strategies of Thermo-Responsive Smart Material Applications for Building Skins in Seoul
, PLEA 2018 HONG KONG, pp. 620-626
|
|
|
|
|
Yoon, J (2019)
SMP Prototype Design and Fabrication for Thermo-responsive Facade Elements
, Journal of Facade Design and Engineering, 7, pp. 41-61
|
|
|
|
|
Yoon, J (2019)
Additive Manufacturing of SMP for deployable structures
, Proceedings of International Conference on Emerging Technologies In Architectural Design (ICETAD2019), Toronto, Canada, pp. 64-71
|
|
|
|
| last changed |
2022/06/07 07:57 |
|
