| id |
caadria2020_332 |
| authors |
Taseva, Yoana, Eftekhar, Nik, Kwon, Hyunchul, Leschok, Matthias and Dillenburger, Benjamin |
| year |
2020 |
| title |
Large-Scale 3D Printing for Functionally-Graded Facade |
| source |
D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 183-192 |
| doi |
https://doi.org/10.52842/conf.caadria.2020.1.183
|
| summary |
Additive manufacturing (AM) technologies such as fused deposition modeling (FDM) have been gaining ground in architecture due to their potential to fabricate geometrically complex building components with integrated functionality. With that in mind, this paper showcases a novel design and fabrication strategy for the production of functionally graded façade elements. Three functional integrations are investigated: gradient infill structures (Figure 1), a non-orthogonal discretization approach for 3D-printed façade elements, and an integrated snapping panel-to-panel connection system. The presented process is then incorporated into a large-scale demonstrator consisting of eight individual façade-panel elements. This paper first presents a prototypical approach for a large-scale, graded 3D-printed facade system with non-standard discretization and then opens the discussion to further related challenges. |
| keywords |
Large-scale 3D Printing; Freeform Façade; Functional Integration; Complex 3D Assembly Connection |
| series |
CAADRIA |
| email |
|
| full text |
 file.pdf (5,375,491 bytes) |
| references |
Content-type: text/plain
|
Aghaei-Meibodi, M., Bernhard, M., Jipa, M. and Dillenburger, B. (2017)
 The Smart Takes from the Strong
, Proceedings of Fabricate, Stuttgart, Germany, p. 210-217
|
|
|
|
|
Bernhard, M., Hansmeyer, M. and Dillenburger, B. (2018)
Volumetric modelling for 3D printed architecture
, Advances in Architectural Geometry 2018, Gothenburg, Sweden, pp. 392-415
|
|
|
|
|
Bonenberger, P. R. (eds) (2016)
The First Snap-Fit Handbook: Creating and Managing Attachments for Plastics Parts
, Hanser Publishers, Munich
|
|
|
|
|
Jipa, A., Giacomarra, F., Giesecke, R., Chousou, G., Lomaglio, M. and Leschok, M. (2019)
3D-printed formwork for bespoke concrete stairs: from computational design to digital fabrication
, Proceedings of the ACM Symposium on Computational Fabrication, Pittsburg, PA
|
|
|
|
|
Klahn, C., Singer, D. and Meboldt, M. (2016)
Design Guidelines for Additive Manufactured Snap-Fit Joints
, Proceedings of CIRP 50, p. 264-269
|
|
|
|
|
Kwon, H. and Dillenburger, B. (2019)
Optimized Internal Structures for 3D-Printed Sandwich Elements
, Proceedings of IASS Annual Symposia, Barcelona, Spain, pp. 1278 - 1285
|
|
|
|
|
Kwon, H., Eichenhofer, M., Kyttas, T. and Dillenburger, B. (2018)
Digital Composites: Robotic 3D Printing of Continuous Carbon Fiber-Reinforced Plastics for Functionally-Graded Building Components
, Proceedings of RobArch, Zurich, Switzerland
|
|
|
|
|
Kwon, K., Kyttas, T. and Dillenburger, B. (2019)
Electrical skin: 3D-printed façade panel with integrated electric infrastructure
, Proceedings of Conference on Advanced Building Skins 2019, Bern, Switzerland, pp. 794-804
|
|
|
|
|
Mungenast, M. (2017)
Fluid Morphology - 3D-printed functional integrated building envelope
, Proceedings of 12th Conference of Advanced Building Skins, Bern, Switzerland, pp. 110-124
|
|
|
|
|
Ryder, G., Ion, B., Green, G., Harrison, D. and Wood, B. (2002)
Rapid design and manufacture tools in architecture.
, Automation in Construction, 1, pp. 279-290
|
|
|
|
|
Snooks, R. (2018)
Sacrificial Formation
, Daas, M. and Wit, A.J. (eds), Towards a Robotic Architecture, Applied Research + Design Publishing, Novato, CA, pp. 100-113
|
|
|
|
|
Strauss, H. (2013)
AM Envelope: The potential of Additive Manufacturing for façade construction
, Delft University of Technology, Faculty of Architecture, Architectural Engineering Technology Department., Delft, The Netherlands, pp. 95-101, 142-159
|
|
|
|
|
Yang, C. and Choi, J.-H. (2015)
Energy Use Intensity Estimation Method Based on Façade Features.
, Procedia Engineering, 118, p. 842-852
|
|
|
|
|
Zaera-Polo, A., Trüby, S., Koolhaas, R. and Boom, I., (2014)
Elements of Architecture: Facade
, Marsilio
|
|
|
|
| last changed |
2022/06/07 07:58 |
|
