| id |
caadria2020_409 |
| authors |
Naboni, Roberto and Paparella, Giulio |
| year |
2020 |
| title |
Circular Concrete Construction Through Additive FDM Formwork |
| source |
D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 233-242 |
| doi |
https://doi.org/10.52842/conf.caadria.2020.1.233
|
| summary |
One of the major downsides of concrete construction is the difficulty to be adapted, modified and deconstructed. In this work, we look at the potential enabled by the use of Additive Formwork based on Fused Deposition Modelling, in order to design and manufacture structural elements which can be assembled and disassembled easily. We call this new typology of structures Circular Concrete Construction. The paper illustrates an integrated computational workflow, which encompasses design and fabrication. Technological aspects of the 3D printed formwork and its application in reversible node and strut connections are described, with reference to the material and structural aspects, as well as prototyping experiments. The work is a proof of concept that opens perspectives for a new type of reversible concrete construction. |
| keywords |
Circular Concrete Construction; Additive Formwork; Additive Manufacturing; Digital Fabrication |
| series |
CAADRIA |
| email |
|
| full text |
 file.pdf (8,362,617 bytes) |
| references |
Content-type: text/plain
|
3XN Architects, et al. (2016)
 Bladerunner, 1st Edition
, KLS PurePrint, Denmark
|
|
|
|
|
Aghaei-Meibodi, M, Bernhard, M, Jipa, A and Dillenburger, B (2017)
The smart takes from the strong.
, Menges, A et al. (eds), Fabricate, UCL Press, pp. 210-217
|
|
|
|
|
Brander, D, B?rentzen, JA, Clausen, K, Fisker, AS, Gravesen, J, Lund, MN, N?rbjerg, TB, Steenstrup, KH and S?ndergaard, A (2016)
Designing for hot-blade cutting: Geometric Approaches for High-Speed Manufacturing of Doubly-Curved Architectural Surfaces
, Adriaenssens, S et al. (eds), Advances in Architectural Geometry 2016, vdf Hochschulverlag AG an der ETH Zürich, Switzerland, pp. 306-327
|
|
|
|
|
De Soto, B, Augusti-Juan, I, Hunhevicz, J, Joss, S, Graser, K, Habert, G and Adey, B (2018)
Productivity of digital fabrication in construction: Cost and time analysis of robotically built wall
, Automation in construction, 92, pp. 297-311
|
|
|
|
|
Jipa, A, Bernhard, M, Dillenburger, B, Ruffray, N, Wangler, T and Flatt, R (2017)
skelETHon Formwork 3D Printed Plastic Formwork for Load-Bearing Concrete Structures
, Proceedings of XXI Congreso de la Sociedad Ibero-americana de Gráfica Digital, Concepción, Chile, pp. 345-352
|
|
|
|
|
Jipa, A, Meibodi, MA, Giesecke, R, Shammas, D, Leschok, M, Bernhard, M and Dillenburger, B (2018)
3D-printed formwork for prefabricated concrete slabs
, Proceedings of the 1st International Conference on 3D Construction Printing, pp. 1-9
|
|
|
|
|
Leshok, M and Dillenburger, B (2019)
Dissolvable 3DP Formwork. Water-Dissolvable 3D Printed Thin-Shell Formwork for Complex Concrete Components.
, ACADIA 19 - UBIQUITY AND AUTONOMY: Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture., pp. 188-197
|
|
|
|
|
Naboni, R and Breseghello, L (2018)
Fused Deposition Modelling Formworks for Complex Concrete Constructions
, Proceedings of Sigradi 2018, XXII Congress of the Iberoamerican Society of Digital Graphics, S?o Carlos, Brasil
|
|
|
|
|
Naboni, R and Breseghello, L (2019)
Additive Formwork for Concrete Shell Constructions
, Proceedings of the IASS Annual Symposium 2019 - Structural Membranes 2019. Form and Force, Barcelona, Spain
|
|
|
|
|
Peters, R (2014)
Additive Formwork
, ACADIA 2014 - Design Agency: Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture, pp. 517-522
|
|
|
|
|
S?ndergaard, A, Feringa, J, N?rbjerg, T, Steenstrup, K, Brander, D, Graversen, J, Markvorsen, S, B?rentzen, A, Petkov, K, Hattel, J, Clausen, K, Jensen, K, Knudsen, L and Kortbek, J (2016)
Robotic Hot-Blade Cutting. An Industrial Approach to Cost-Effective Production of Double Curved Concrete Structures
, Reinhardt, D et al. (eds), RobArch2016 - Robotic Fabrication in Architecture, Art and Design 2016., Springer International Publishing, Switzerland, pp. 151-164
|
|
|
|
|
S?ndergaard, A (2014)
Odico Formwork Robotics
, AD Architectural Design. Special Issue: Made by Robots: Challenging Architecture at a Larger Scale., 84, pp. 66-67
|
|
|
|
|
Salama, W (2017)
Design of concrete buildings for disassembly: An explorative review
, International Journal of Sustainable Built Environment, 6, pp. 617-635
|
|
|
|
|
Wangler, T, Lloret, E, Reiter, L, Hack, N, Gramazio, F, Kohler, M, Bernhard, M, Dillenburger, B, Buchli, J, Roussel, N and Flatt, R (2016)
Digital Concrete: Opportunities and Challenges
, RILEM Technical Letters, 1, pp. 67-75
|
|
|
|
| last changed |
2022/06/07 07:59 |
|
