id |
caadria2022_100 |
authors |
Oghazian, Farzaneh, Brown, Nathan and Davis, Felecia |
year |
2022 |
title |
Calibrating a Formfinding Algorithm for Simulation of Tensioned Knitted Textile Architectural Models |
source |
Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 111-120 |
doi |
https://doi.org/10.52842/conf.caadria.2022.1.111
|
summary |
This paper presents an optimization-based calibration process for tuning a digital formfinding algorithm used with knitted textile materials in architectural tension structures. 3D scanning and computational optimization are employed to accurately approximate a physical model in a digital workflow that can be used to establish model settings for future exploration within a knit geometric typology. Several aspects of the process are investigated, including different optimization algorithms and various approaches to data extraction. The goal is to determine the appropriate optimization method and data extraction, as well as automate the process of adjusting formfinding settings related to the length of the meshes associated with the knitted textile behavior. The calibration process comprises three steps: extract data from a 3D scanned model; determine the bounds of formfinding settings; and define optimization variables, constraints, and objectives to run the optimization process. Knitted textiles made of natural yarns are organic materials and when used at the industrial level can satisfy DSG 9 factors to promote sustainable industrialization and foster innovation in building construction through developing sustainable architectural systems. The main contributions of this paper are calibrated digital models of knitted materials and a comparison of the most effective algorithms and model settings, which are a starting point to apply this process to a wider range of knit geometries. These models enhance the implementation and further development of novel architectural knitted systems. |
keywords |
Tensioned Knitted Textiles, Computational Design, Formfinding, Calibrating, Optimization, SDG 9 |
series |
CAADRIA |
email |
|
full text |
file.pdf (3,069,318 bytes) |
references |
Content-type: text/plain
|
Ahlquist, S. & Menges, A. (2013)
Frameworks for Computational Design of Textile Micro-Architectures and Material Behavior in Forming Complex Force-Active Structures
, ACADIA Conference
|
|
|
|
Baranovskaya, Y. S., Tamke, M. & Thomsen, M. R. (2020)
Simulation and Calibration of Graded Knitted Membranes
, ACADIA Conference
|
|
|
|
Brown, N. C., Jusiega, V. & Mueller, C. T. (2020)
Implementing data-driven parametric building design with a flexible toolbox
, Automation in Construction, 118, 16. doi:10.1016/j.autcon.2020.103252
|
|
|
|
Costa, A. & Nannicini, G. (2018)
RBFOpt: an open-source library for black-box optimization with costly function evaluations
, Mathematical Programming Computation, 10(4), 597-629
|
|
|
|
Cuvilliers, P., Yang, J. R., Coar, L. & Mueller, C. (2018)
A comparison of two algorithms for the simulation of bending-active structures
, International Journal of Space Structures, 33(2), 73-85
|
|
|
|
Davis, F. (2021)
Fabricating Networks: Transmissions and Receptions from Pittsburgh’s Hill District, Flower Antenna
, Available from: https://www.moma.org/audio/playlist/312/4039. Retrieved [04/05/2021]
|
|
|
|
Dutta, S. & Ghosh, S. (2019)
Analysis and Design of Tensile Membrane Structures: Challenges and Recommendations
, Practice Periodical on Structural Design and Construction, 24(3)
|
|
|
|
Oghazian, F. & Vazquez, E. (2021)
A Multi-Scale Workflow for Designing with New Materials in Architecture: Case Studies Across Materials and Scales
, CAADRIA 26
|
|
|
|
Oghazian, F., Farrokhsiar, P. & Davis, F. (2021)
A simulation process for implementation of knitted textiles in developing architectural tension structures
, IASS 2020/21
|
|
|
|
Oxman, N. & Rosenberg, J. L. (2007)
Material-based Design Computation an Inquiry into Digital Simulation of Physical Material Properties as Design Generators
, IJAC journal, 5(1), 25-44
|
|
|
|
Pal, A., Chan, W. L., Tan, Y. Y., Chia, P. Z. & Tracy, K. J. (2020)
Knit Concrete Formwork
, CAADRIA Conference
|
|
|
|
Sabin, J. E. (2013)
My thread Pavilion: Generative Fabrication in Knitting Processes
, ACADIA Conference
|
|
|
|
Schmeck, M. & Gengnagel, C. (2016)
Calibrated Modeling of Knitted Fabric as a Means of Simulating Textile Hybrid Structures
, Procedia Engineering, 155, 297-305. doi:https://doi.org/10.1016/j.proeng.2016.08.032
|
|
|
|
Tamke, M., Sinke Baranovskaya, Y., Monteiro, F., Lienhard, J., La Magna, R. & Ramsgaard Thomsen, M. (2020)
Computational knit – design and fabrication systems for textile structures with customised and graded CNC knitted fabrics
, Architectural Engineering and Design Management, 1-21
|
|
|
|
Thomsen, M. R., Tamke, M., Deleuran, A. H., Tinning, I. K. F., Evers, H. L., Gengnagel, C. & Schmeck, M. (2015)
Hybrid Tower, Designing Soft Structures
, Design Modelling Symposium 2015
|
|
|
|
Thomsen, M. R., Tamke, M., Karmon, A., Underwood, J., Gengnagel, C., Stranghöner, N. & Uhlemann, J. (2016)
Knit as Bespoke Material Practice for Architecture
, ACADIA
|
|
|
|
Wortmann, T. (2017)
OPOSSUM: Introducing and Evaluating a Model-based Optimization Tool for Grasshopper
, CAADRIA Conference
|
|
|
|
last changed |
2022/07/22 07:34 |
|