| id |
caadria2022_193 |
| authors |
Tsai, Tsung-Han, Chen, Ting-Chia, Huang, Ching-Wen, Lu, Yen-Cheng and Wang, Shih-Yuan |
| year |
2022 |
| title |
S.n.o.w_Sintering TPU via Nichrome Wire |
| source |
Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 243-252 |
| doi |
https://doi.org/10.52842/conf.caadria.2022.2.243
|
| summary |
This paper introduces and investigates NiChrome wire sintering, a novel fabrication technique in the field of additive manufacturing. With a combination of differentiated material states and material properties, this research generates forms with different sintering strategies through computation and fabrication systems. Rather than creating objects through selectively depositing melted material in a predetermined path, layer-by-layer, this rapid prototyping methodology generates 2D or 3D spatial wireframes by weaving NiChrome wire and sintering thermoplastic polyurethane (TPU) onto it by utilizing the instantaneous high temperature of NiChrome wire after electrification. A series of experiments is presented utilizing a proportional integral derivative (PID) temperature control system in cooperation with thermal camera equipment to ensure consistent results under the same conditions. In addition, the project focuses not only on developing NiChrome wire sintering systems but also on the applicabilities of this technique by fabricating wireframe surfaces under different situations. |
| keywords |
Nichrome Wire Sintering, Rapid Prototyping, Elastic Material, Digital Fabrication, SDG 12 |
| series |
CAADRIA |
| email |
|
| full text |
 file.pdf (2,259,526 bytes) |
| references |
Content-type: text/plain
|
Hajash, K., Sparrman, B., Guberan, C., Laucks, J. & Tibbits, S. (2017)
 Large-scale rapid liquid printing
, 3D Printing and Additive Manufacturing, 4(3), 123-132
|
|
|
|
|
Knippers, J., La Magna, R., Menges, A., Reichert, S., Schwinn, T. & Waimer, F. (2015)
ICD/ITKE research pavilion 2012: coreless filament winding based on the morphological principles of an arthropod exoskeleton
, Architectural Design, 85(5), 48-53
|
|
|
|
|
Pillwein, S., Leimer, K., Birsak, M. & Musialski, P. (2020)
On elastic geodesic grids and their planar to spatial deployment
, arXiv preprint arXiv:2007.00201
|
|
|
|
|
Yablonina, M., Prado, M., Baharlou, E., Schwinn, T. & Menges, A. C. H. I. M. (2017)
Mobile robotic fabrication system for filament structures
, Fabricate: Rethinking Design and Construction, 3
|
|
|
|
| last changed |
2022/07/22 07:34 |
|
