| id |
caadria2022_338 |
| authors |
Dias Guimaraes, Gabriela, Gu, Ning, Gomes da Silva, Vanessa, Ochoa Paniagua, Jorge, Rameezdeen, Rameez, Mayer, Wolfgang and Kim, Ki |
| year |
2022 |
| title |
Data, Stakeholders, and Environmental Assessment: A BIM-Enabled Approach to Designing-out Construction and Demolition Waste |
| doi |
https://doi.org/10.52842/conf.caadria.2022.2.587
|
| source |
Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 587-596 |
| summary |
Construction and Demolition waste has started to become a target in the path for a more sustainable industry mainly due to massive resource consumption, land depletion and emissions. As a substantial amount of waste originates due to inadequate decision-making during design, strategies to design-out waste are required. Accurate environmental impact of, not only the whole building, but construction materials and elements are crucial to the development of these strategies, but dependent on data availability, expert knowledge and proper sharing and storage of information. Hence, this study aims to investigate the relation between data, stakeholders and environmental assessment to properly build a design-out waste framework. An in-depth data collection from literature review and stakeholders' interviews guided the development of a conceptual framework to assist designers with information related to waste production and its reduction. After that, the necessary technical specifications for its adoption through a BIM environment were analysed. Its contribution is firstly on a shift of thinking during the design phase, as the goal is to provide environmental information so designers can take into consideration the long-term consequences of waste from different strategies and solutions; and secondly in the development of a computational tool that facilitates the design-out process. |
| keywords |
Construction and Demolition Waste, Design, BIM, Environmental Data, Stakeholders, SDG 11 |
| series |
CAADRIA |
| email |
gabriela.dias_guimaraes@mymail.unisa.edu.au |
| full text |
 file.pdf (494,267 bytes) |
| references |
Content-type: text/plain
|
Akinade, O. O., Oyedele, L. O., Ajayi, S. O., Bilal, M., Alaka, H. A., Owolabi, H. A. & Arawomo, O. O. (2018)
 Designing out construction waste using BIM technology: Stakeholders’ expectations for industry deployment
, Journal of Cleaner Production, 180, 375–385. https://doi.org/10.1016/j.jclepro.2018.01.022
|
|
|
|
|
Babbie, E. (2016)
The Practice of Social Research (14th ed)
, Boston, MA: Cengage Learning
|
|
|
|
|
Baker-Brown, D. (2017)
The Re-Use Atlas (1st ed
, RIBA Publishing
|
|
|
|
|
Calixto, V., Canuto, R., Noronha, M., Afrooz, A. A., Gu, N. & Celani, G. (2021)
A layered approach for the data-driven design of smart cities
, Projections - Proceedings of the 26th International Conference of the Association for Computer-Aided Architectural Design Research in Asia, CAADRIA 2021, 2, 739–748
|
|
|
|
|
Enshassi, A. (1996)
Materials control and waste on building sites: Data in the study was obtained from 86 housing projects on several locations in the Gaza Strip
, Building Research and Information, 24(1), 31–34. https://doi.org/10.1080/09613219608727495
|
|
|
|
|
Jalaei, F., Zoghi, M. & Khoshand, A. (2019)
Life cycle environmental impact assessment to manage and optimize construction waste using Building Information Modeling (BIM)
, International Journal of Construction Management. https://doi.org/10.1080/15623599.2019.1583850
|
|
|
|
|
Jin, R., Yuan, H. & Chen, Q. (2019)
Science mapping approach to assisting the review of construction and demolition waste management research published between 2009 and 2018
, Resources, Conservation and Recycling, 140(October 2018), 175–188. https://doi.org/10.1016/j.resconrec.2018.09.029
|
|
|
|
|
Keys, A. & Baldwin, an. (2000)
Designing to encourage waste minimisation in the construction industry
, Proceedings of CIBSE National Conference, Dublin. Retrieved from https://dspace.lboro.ac.uk/dspace/handle/2134/4945
|
|
|
|
|
Llatas, C. & Osmani, M. (2016)
Development and validation of a building design waste reduction model
, Waste Management, 56, 318–336. https://doi.org/10.1016/j.wasman.2016.05.026
|
|
|
|
|
Olanrewaju, S. D. & Ogunmakinde, O. E. (2020)
Waste minimisation strategies at the design phase: Architects’ response
, Waste Management, 118, 323–330. https://doi.org/10.1016/j.wasman.2020.08.045
|
|
|
|
|
Osmani, M., Glass, J. & Price, A. D. F. (2008)
Architects’ perspectives on construction waste reduction by design
, Waste Management, 28(7), 1147–1158. https://doi.org/10.1016/j.wasman.2007.05.011
|
|
|
|
|
Osmani, M., Price, A. D. F. & Glass, J. (2005)
Potential for construction waste minimisation through design
, Kungolos, A and Brebbia, CA and Beriatos, E (Ed.), Sustainable Development and Planning II, Vols 1 and 2 (pp. 575–584)
|
|
|
|
|
Wang, J., Li, Z. & Tam, V. W. Y. (2015)
Identifying best design strategies for construction waste minimization
, Journal of Cleaner Production, 92, 237–247. https://doi.org/10.1016/j.jclepro.2014.12.076
|
|
|
|
|
Wang, J., Wu, H., Duan, H., Zillante, G., Zuo, J. & Yuan, H. (2016)
Combining life cycle assessment and Building Information Modelling to account for carbon emission of building demolition waste: A case study
, Journal of Cleaner Production, 172, 3154–3166. https://doi.org/10.1016/j.jclepro.2017.11.087
|
|
|
|
|
Xu, J., Shi, Y., Xie, Y. & Zhao, S. (2019)
A BIM-Based construction and demolition waste information management system for greenhouse gas quantification and reduction
, Journal of Cleaner Production, 229, 308–324. https://doi.org/10.1016/j.jclepro.2019.04.158
|
|
|
|
|
Zheng, L., Wu, H., Zhang, H., Duan, H., Wang, J., Jiang, W. & Song, Q. (2017)
Characterizing the generation and flows of construction and demolition waste in China
, Construction and Building Materials, 136, 405–413. https://doi.org/10.1016/j.conbuildmat.2017.01.055
|
|
|
|
| last changed |
2022/07/22 07:34 |
|
