| id |
caadria2024_387 |
| authors |
Sun, Jiapan, Fan, Bingbing, Li, Bin and Zhang, Yimeng |
| year |
2024 |
| title |
A Study of Viability and Characteristic of 3D-Printable Mortar With Yellow River Sand |
| source |
Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 3, pp. 161–170 |
| doi |
https://doi.org/10.52842/conf.caadria.2024.3.161
|
| summary |
This study explores the feasibility of formulating cement-based 3D printing mortar by incorporating Yellow River sand as an aggregate. Through systematic testing of the printing performance of Yellow River sand 3D mortar with varying proportions, preliminary insights into a formulation suitable for 3D printing of Yellow River sand mortar have been elucidated. Concurrently, the investigation employs the prepared desert sand 3D printing mortar with a robotic platform and an autonomously developed storage-extrusion 3D printing tool head to conduct 3D printing experiments for the designed samples. This comprehensive process validates the feasibility of 3D printing utilizing Yellow River sand mortar. Moreover, this research broadens the utilization scenarios of Yellow River sand and introduces an innovative approach and methodology for dredging and silt removal in the Yellow River. |
| keywords |
3D Mortar Printing, The Yellow River Sand, Printing Performance, Mix-ratio Optimization Design, Printing Validation, SDG 9, SDG 11. |
| series |
CAADRIA |
| email |
|
| full text |
 file.pdf (969,937 bytes) |
| references |
Content-type: text/plain
|
Deng, Q., Zou, S., Xi, Y., & Singh, A. (2023)
 Development and characteristic of 3D-printable mortar with waste glass powder
, Buildings, 13(6), 1476. https://doi.org/10.3390/buildings13061476
|
|
|
|
|
Gomaa, M., Jabi, W., Veliz Reyes, A., & Soebarto, V. (2021)
3D printing system for Earth-based construction: Case study of cob
, Automation in Construction, 124, 103577. https://doi.org/10.1016/j.autcon.2021.103577
|
|
|
|
|
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G., & Thorpe, T. (2012)
Mix design and fresh properties for high-performance printing concrete
, Materials and Structures, 45(8), 1221-1232. https://doi.org/10.1617/s11527-012-9828-z
|
|
|
|
|
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012)
Hardened properties of high-performance printing concrete
, Cement and Concrete Research, 42(3), 558-566. https://doi.org/10.1016/j.cemconres.2011.12.003
|
|
|
|
|
Liang, H., Xi, L., Xiao, L., Guo, Li.,& Wenzhan, J. (2020)
Research and application of performance based on desert sand 3D printing mortar
, Concrete, 374, 108-110. HYPERLINK "https://doi.org/10.3969/j.issn.1002-3550.2020.12.024" https://doi.org/10.3969/j.issn.1002-3550.2020.12.024
|
|
|
|
|
Ma, G., Li, Z., & Wang, L. (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
, Construction and Building Materials, 162, 613-627. https://doi.org/10.1016/j.conbuildmat.2017.12.051
|
|
|
|
|
Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018)
Hydration and rheology control of concrete for digital fabrication: Potential admixtures and Cement Chemistry
, Cement and Concrete Research, 112, 96-110. https://doi.org/10.1016/j.cemconres.2018.05.014
|
|
|
|
|
Palacios, J., Paredes, M., Castillo, T., & Paredes, O. (2020)
Mortar for 3D printers using River Sand, Portland cement and hydraulic lime
, Scientific Review Engineering and Environmental Studies (SREES), 29(4), 399-408. https://doi.org/10.22630/pniks.2020.29.4.34
|
|
|
|
|
Zhang, Y., Zhang, Y., Liu, G., Yang, Y., Wu, M., & Pang, B. (2018)
Fresh properties of a novel 3D printing concrete ink
, Construction and Building Materials, 174, 263-271. https://doi.org/10.1016/j.conbuildmat.2018.04.115
|
|
|
|
|
Zou, S., Xiao, J., Ding, T., Duan, Z., & Zhang, Q. (2021)
Printability and advantages of 3D printing mortar with 100% recycled sand
, Construction and Building Materials, 273, 121699. https://doi.org/10.1016/j.conbuildmat.2020.121699
|
|
|
|
| last changed |
2024/11/17 22:05 |
|
