| authors |
Kawasumi, Norihiro and Yamaguchi, Shigeyuki |
| year |
1998 |
| title |
Reconstruction of an Architectural Three Dimensional Model from Orthographic Drawings |
| doi |
https://doi.org/10.52842/conf.caadria.1998.355
|
| source |
CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 355-364 |
| summary |
In this paper, we describe a semi-automatic reconstruction method of a three-dimensional
model from orthographic view drawings of architecture. There are several
approaches to reconstruct three-dimensional solids from two-dimensional drawings. But
most of them deal with mechanical drawings, not architectural drawings. We observed
three-dimensional modeling process of design practice and we tried to make clear model-ing
procedure from architectural drawings, such as plan and elevation views, and classified
into seven typical modeling operations on three-dimensional CAD system. Then we pro-posed
a reconstruction method to create a surface three-dimensional model from a set of
architectural plan and elevation drawings. Each elevation drawing is defined as polygon
elements. The reconstruction system makes each element of elevations built up and then
placed each around the contour of the plan drawing. Several illustrative examples are in-cluded
as results.
|
| keywords |
CAD, Interface, Modeling, Drawing Recognition |
| series |
CAADRIA |
| email |
|
| more |
http://www.caadria.org |
| full text |
 file.pdf (40,373 bytes) |
| references |
Content-type: text/plain
|
Aldefeld, B. (1983)
 On automatic recognition of 3D structures from 2D representations
, Computer-Aided Design 15(2) , pp. 59-64
|
|
|
|
|
Chun-Fong You and Shih-shing Yang (1996)
Reconstruction of Curvilinear Manifold Objects From Orthographic Views
, Computer & Graphics 20(2), pp. 275-293
|
|
|
|
|
Dori, D. Tombre, K. (1995)
From engineering drawings to 3D CAD models: are we ready now?
, Computer-Aided Design 27(4) , pp. 243-254
|
|
|
|
|
Gujar, Uday G. and Nagendra, I.V. (1989)
Construction of 3D solid objects from orthographic view
, Computer & Graphics 13(4) , pp. 505-521
|
|
|
|
|
Idesawa, Masanori (1972)
A System to Generate a Solid Figure from a three view
, Bulletin of Japan Society of Mechanical Engineering (16), pp. 216-225
|
|
|
|
|
Kawasumi, N. and Yamaguchi, S. (1997)
A Study of Intelligent Design Modeling Interface -The Method to Reconstruct the architectural 3D model from orthographic view
, Proceedings of the Twentieth Simposium on Computer Technology of Information, Systems and Applications, pp.169-174
|
|
|
|
|
Kawasumi, N., Toizumi, K. and Yamaguchi, S. (1995)
A Study of Methods about the Reconstruction of Architectural 3D Models from 2D CAD Drawings. Proceedings of the eighteenth Simposium on Computer Technology of Information
, Systems and Applications, pp.211-216
|
|
|
|
|
Kawasumi, N., Toizumi, K. and Yamaguchi, S. (1996)
A Study of the System to Reconstruct of Architectural 3D Models from 2D Drawings
, Proceedings of AIJ Kinki Chapter, pp. 617-620
|
|
|
|
|
Markowsky, G. and Wesley, M.A. (1980)
Fleshing Out Wire Frames
, IBM Journal Research & Development 24(5) , pp. 582-597
|
|
|
|
|
Nagendra, I.V. Uday G. Gujar (1988)
3-D Objects from 2-D orthographic views - A SURVEY -
, Computer & Graphics 12(1) , pp. 111-114
|
|
|
|
|
Numao, Masayuki Masuda, Hiroshi (1996)
Current Status of the Technologies for Constructing Solid Models from Orthographic Views
, Journal of Japanese Society for Artificial Intelligence 11(4), pp. 542-549
|
|
|
|
|
Qing-Wen Yan, C L Philip Chen, Zesheng Tang (1994)
Efficient algorithm for the reconstruction of 3D objects from orthographic projections
, Computer-Aided Design 26(9), pp. 699-717
|
|
|
|
|
Wesley, M.A. Markowsky, G. (1981)
Fleshing Out Projections
, IBM Journal Research & Development 25(6) , pp. 934-954
|
|
|
|
| last changed |
2022/06/07 07:52 |
|
