| id |
ecaade2012_102 |
| authors |
Pavlícek, Jiri; Kaftan, Martin |
| year |
2012 |
| title |
Parametric Design System for Passive Houses |
| doi |
https://doi.org/10.52842/conf.ecaade.2012.2.487
|
| source |
Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 487-494 |
| summary |
The intention of this research is to develop a design system for geometrically complex passive houses. Research focuses especially on the link-up of the CAAD (Computer-aided architectural design) and the CAM process (Computer-aided manufacturing) and deals only with timber structures. The aim of the project is to develop a system that would automate a creation of the computer model of the geometrically complex timber structures and link it to fabrication process. It should be possible to use the system for houses of the size of a family house up to an apartment house. The advantages of the system ought to be the fabrication preciseness, economical availability, high speed of construction, eco-friendliness and above all absence of geometrical constraints. |
| wos |
WOS:000330320600051 |
| keywords |
Parametric; passive house; timber; CLT; geometry |
| series |
eCAADe |
| email |
|
| full text |
 file.pdf (1,750,146 bytes) |
| references |
Content-type: text/plain
|
Addis, B (1994)
 The Art of the Structural Engineer
, Artemis, London
|
|
|
|
|
Buri, HU And Weinand, Y (2010)
Origami – Folded Plane Structures
, Ph.D. Thesis, EPFL, Lausanne
|
|
|
|
|
Eigensatz, M et al. (eds.) (2010)
Case studies in cost-optimized paneling of architectural freeform surfaces
, Ceccato, C. et al. (eds.), Advances in Architectural Geometry 2010, Springer, Vienna, pp. 49–72
|
|
|
|
|
Glymph, J, Shelden, D, Ceccato, C, Mussel, J and Schober, H (2004)
A parametric strategy for free-form glass structures using quadrilateral planar facets
, Automation in Construction, 13(2), pp. 187–202
|
|
|
|
|
Liu, Y, Pottmann, H, Wallner, J, Yang, Y and Wang, W (2006)
Geometric modeling with conical meshes and developable surfaces
, Proc. of 33rd ACM SIGGRAPH, Borston, 681–689
|
|
|
|
|
Pottmann, H, Schiftner, A, Bo, P, Schmiedhofer, H, Wang, W, Baldassini, N and Wallner, J (2008)
Freeform surfaces from single curved panels
, ACM Transactions on Graphics, 27(3)
|
|
|
|
|
Schimek H, Calderon ER, Wilsche A (2012)
Sewing Timber Panels: An innovative digitally supported joint system for self-supported timber plate structures
, CAADRIA 2012 [Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia], pp. 213-222
|
|
|
|
|
Shelden, RD (2002)
Digital Surface Representation and the Constructability of Gehry’s Architecture
, Ph.D. thesis, Massachusetts Institute of Technology, Cambridge
|
|
|
|
|
Tsigkari M (2006)
Tessellation of arbitrarily shaped objects
, Master thesis, UCL, London
|
|
|
|
|
Wang, W and Liu, Y (2010)
A note on planar hexagonal meshes
, IMA Volumes in Mathematics and its Applications, 105(5), pp. 221–234
|
|
|
|
| last changed |
2022/06/07 07:59 |
|
