| id |
ecaade2013_076 |
| authors |
Dolas, Caner; Dieckmann, Andreas and Russell, Peter |
| year |
2013 |
| title |
Building Your Own Urban Tool Kit |
| doi |
https://doi.org/10.52842/conf.ecaade.2013.2.485
|
| source |
Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 485-493 |
| summary |
The paper describes the development of a set of smart BIM components to facilitate and accelerate the creation of large-scale urban models in the early design phase in a BIM software environment. The components leverage the analytical, parametric and modelling capabilities of the BIM environment to support adaptive parameter-driven building geometry, patterning of different building types, early numerical and graphical design evaluation, various simulation methods and the exploration of design alternatives. The toolset consists of the most common building shapes, but can be extended with additional shapes and their respective area and volumetric calculations when necessary. The rapid large-scale deployment of the components has been achieved by diverting existing tools from their intended use. |
| wos |
WOS:000340643600049 |
| keywords |
BIM; urban planning; early design; rule-based design; parametric design. |
| series |
eCAADe |
| email |
|
| full text |
 file.pdf (1,873,133 bytes) |
| references |
Content-type: text/plain
|
Bazjanac, V and Crawley, DB (1997)
 The Implementation of Industry Foundation Classes in Simulation Tools for the Building Industry
, Building ’97 Simulation Conference, Prague (Czech Republic)
|
|
|
|
|
De Laat, R and Van Berlo, L (2011)
Integration of BIM and GIS: The Development of the CityGML GeoBIM Extension
, Kolbe, T.H., König, G., Nagel, C. (Eds.), Advances in 3D Geo-Information Sciences. Springer Berlin Heidelberg, pp. 211–225
|
|
|
|
|
Dieckmann, A and Kron, Z (2012)
Echo Chamber: Complex Parametric Arrays in Autodesk Revit
, Autodesk University 2012, Las Vegas, NV (USA)
|
|
|
|
|
Donath, D and Lobos, D (2006)
Massing Study Support: A New Tool for Early Stages of Architectural Design
, Architecture in Computro [26th eCAADe Conference Proceedings], Antwerpen (Belgium), pp. 101–108
|
|
|
|
|
Eastman, CM, Teicholz, P, Sacks, R and Liston, K (2008)
BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, and Contractors
, Wiley, Hoboken, NJ (USA)
|
|
|
|
|
El-Mekawy, M (2010)
Integrating BIM and GIS for 3D City Modelling – The Case of IFC and CityGML
, Licentiate Thesis
|
|
|
|
|
Gröger, G and Plümer, L (2012)
CityGML – Interoperable Semantic 3D City Models
, ISPRS Journal of Photogrammetry and Remote Sensing 71, 12–33
|
|
|
|
|
Isikdag, U and Zlatanova, S (2009)
Towards Defining a Framework for Automatic Generation of Buildings in CityGML Using Building Information Models
, Lee, J., Zlatanova, S. (Eds.), 3D Geo-Information Sciences. Springer Berlin Heidelberg, pp. 79–96
|
|
|
|
|
Kim, JB, Clayton, MJ and Yan, W (2011)
Parametric Form-Based Codes: Incorporation of Land-use Regulations into Building Information Models, in: Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
, Lincoln, NE (USA), pp. 217–223
|
|
|
|
|
Kolbe, TH, Gröger, G and Plümer, L (2005)
CityGML – Interoperable Access to 3D City Models
, Proceedings of the International Symposium on Geo-Information for Disaster Management, Delft (Netherlands)
|
|
|
|
|
Miller, L, Ho, HH and Light, D (2009)
Autodesk Revit for Urban Design
, Autodesk University 2009, Las Vegas, NV (USA)
|
|
|
|
|
Woodbury, R (2010)
Elements of Parametric Design
, Routledge, NY
|
|
|
|
| last changed |
2022/06/07 07:55 |
|
