CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References
id ecaade2015_83
authors Fukuda, Tomohiro; Mori, Keisuke and Imaizumi, Jun
year 2015
title Integration of CFD, VR, AR and BIM for Design Feedback in a Design Process - An Experimental Study
source Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 665-672
doi https://doi.org/10.52842/conf.ecaade.2015.1.665
summary To improve indoor thermal environment, it is necessary to promote a lean design process, so forecasting and consensus building by experiment and numerical calculation from the design stage have become essential. Rapid advances in software and hardware allow feedback to be generated on novel design alternatives, rather than relying on simulation results based on past designs. However, this concept has not been fully verified. Therefore, this study presents an integrated design tool which consists of Computational Fluid Dynamics (CFD), Virtual Reality (VR), Augmented Reality (AR) and Building Information Modeling (BIM). The tool was applied to the problems of an actual housing design project. Both the content of design feedback on design problems revealed through simulations in the project, and the features in the feedback process were discussed.
wos WOS:000372317300072
series eCAADe
email
full text file.pdf (11,671,322 bytes)
references Content-type: text/plain
Details Citation Select
100%; open Azuma, R.T. (1997) Find in CUMINCAD A survey of augmented reality , Presence-Teleoperators and Virtual Environments, 6 (4), pp. 355-385

100%; open Blocken, B., Stathopoulos, T., Carmeliet, J. and Hensen, J. L. M. (2011) Find in CUMINCAD Application of CFD in building performance simulation for the outdoor environment: an overview , J. Building Perform. Simul., 4(2), pp. 157-184

100%; open Chung, D. H. J. and Malone-Lee, L. C. (2010) Find in CUMINCAD Computational fluid dynamics for efficient urban design , Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia (CAADRIA2010), Hong Kong, pp. 357-366

100%; open Fukuda, T. and Taguchi, M. (2013) Find in CUMINCAD Data Pipeline from BIM to Energy Simulator and Virtual Reality for Upgrading Interoperability , Proceedings of the First International Conference on Civil and Building Engineering Informatics (ICCBEI2013), Tokyo, pp. 403-409

100%; open He, J. and Hoyano, A. (2008) Find in CUMINCAD A numerical simulation method for analyzing the thermal improvement effect of super-hydrophilic photocatalyst-coated building surfaces with water film on the urban/built environment , Energy and Buildings, 10(6), pp. 968-978

100%; open Kaijima, S., Bouffanais, R. and Willcox, K. (2013) Find in CUMINCAD Computational Fluid Dynamics for Architectural Design , Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013), Singapore, pp. 169-178

100%; open Kato, H. and Billinghurst, M. (1999) Find in CUMINCAD Marker tracking and HMD calibration for a video-based augmented reality conferencing system , Proceedings of the 2nd International Workshop on Augmented Reality, San Francisco, CA, USA

100%; open Klein, G. and Murray, D. (2007) Find in CUMINCAD Parallel Tracking and Mapping for Small AR Workspaces , ISMAR '07 Proceedings of the 2007 6th IEEE and ACM International Symposium on Mixed and Augmented Reality, pp. 225-234

100%; open Milgram, P. and Kishino, F. (1994) Find in CUMINCAD A Taxonomy of Mixed Reality Visual Displays , IEICE TRANSACTIONS on Information and Systems, E77-D(12), pp. 1321-1329

100%; open Murakami, S. (2006) Find in CUMINCAD Environmental design of outdoor climate based on CFD , Fluid dynamics research, 38(2-3), pp. 108-126

100%; open Shahnawaz, V., Vance, J. and Kutti, S. (1999) Find in CUMINCAD Visualization of Post-Processed CFD Data in a Virtual Environment , 1999 ASME Design Engineering Technical Conference, DETC/CIE 9042

100%; open Sun, L., Fukuda, T. and Resch, B. (2014) Find in CUMINCAD A synchronous distributed cloud-based virtual reality meeting system for architectural and urban design , Frontiers of Architectural Research, 3(4), pp. 348-357

100%; open Watanabe, S. (2011) Find in CUMINCAD Simulating 3D Architecture and Urban Landscapes in Real Space , Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia (CAADRIA2011), New Castle, pp. 261-270

100%; open Yabuki, N., Furubayashi, S., Hamada, Y. and Fukuda, T. (2012) Find in CUMINCAD Collaborative Visualization of Environmental Simulation Result and Sensing Data Using Augmented Reality , 9th International Conference, CDVE 2012 (Cooperative Design, Visualization, and Engineering), Osaka, pp. 227-230

100%; open Yabuki, N., Miyashita, K. and Fukuda, T. (2011) Find in CUMINCAD An invisible height evaluation system for building height regulation to preserve good landscapes using augmented reality , Automation in Construction, 20(3), pp. 228-235

100%; open Yuan, M. L., Ong, S. K. and Nee, A. Y. C. (2006) Find in CUMINCAD Registration using natural features for augmented reality systems , Visualization and Computer Graphics, IEEE Transactions on, 12(4), pp. 569-580

last changed 2022/06/07 07:50
pick and add to favorite papersHOMELOGIN (you are user _anon_278537 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002