| id |
ecaade2017_059 |
| authors |
Narangerel, Amartuvshin, Lee, Ji-Hyun and Stouffs, Rudi |
| year |
2017 |
| title |
Thermal and Daylighting Optimization of Complex 3D Faceted Façade for Office Building |
| source |
Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 209-218 |
| doi |
https://doi.org/10.52842/conf.ecaade.2017.1.209
|
| summary |
Conventional façade design and its impact on building energy as well as indoor comfort is a well-researched topic in the architecture field. This paper examines the potential of a complex 3D shaped building envelope, elaborating on previous work by implementing energy simulation within the building façade optimization process. The multi-objective optimizations are conducted considering total thermal energy, electricity generation through BIPV, and daylighting in generic single person office rooms under meteorological data of Korea and Singapore. The performance of the non-dominants is analyzed and the results show an improvement in all objectives comparing with the preliminary study. |
| keywords |
Parametric facade design; muli-objective optimization; energy optimization; daylighting; form finding |
| series |
eCAADe |
| email |
|
| full text |
 file.pdf (8,938,540 bytes) |
| references |
Content-type: text/plain
|
Bader, J and Zitzler, E (2011)
 HypE: An Algorithm for Fast Hypervolume-Based Many-Objective Optimization.
, Evolutionary computation, 19(1), pp. 45-76
|
|
|
|
|
Bonomo, P, Chatzipanagi, A and Frontini, F (2015)
Overview and analysis of current BIPV products : new criteria for supporting the technological transfer in the building sector
, International Journal of Architecture Technology and Sustainability, 1, pp. 66-85
|
|
|
|
|
Dino, IG (2012)
Creative design exploration by parametric generative systems in architecture
, Metu Journal of the Faculty of Architecture, 29(1), pp. 207-224
|
|
|
|
|
Echenagucia, TM, Capozzoli, A, Cascone, Y and Sassone, M (2015)
The early design stage of a building envelope: Multi-objective search through heating, cooling and lighting energy performance analysis
, Applied Energy, 154, pp. 577-591
|
|
|
|
|
Gagne, J and Andersen, M (2012)
A generative facade design method based on daylighting performance goals
, Journal of Building Performance Simulation, 5(3), pp. 141-154
|
|
|
|
|
Goia, F, Haase, M and Perino, M (2013)
Optimizing the configuration of a facade module for office buildings by means of integrated thermal and lighting simulations in a total energy perspective
, Applied Energy, 108, pp. 515-527
|
|
|
|
|
Gonzalez, J and Fiorito, F (2015)
Daylight Design of Office Buildings: Optimisation of External Solar Shadings by Using Combined Simulation Methods
, Buildings, 5(2), pp. 560-580
|
|
|
|
|
Manzan, M (2014)
Genetic optimization of external fixed shading devices
, Energy and Buildings, 72, pp. 431-440
|
|
|
|
|
Ming-Chin, H, Chiang, CM, Chou, PC, Chang, KF and Lee, CY (2008)
Optimal sun-shading design for enhanced daylight illumination of subtropical classrooms
, Energy and Buildings, 40(10), pp. 1844-1855
|
|
|
|
|
Nabil, A and Mardaljevic, J (2005)
Useful daylight illuminance: a new paradigm for assessing daylight in buildings
, Lighting Research and Technology, 37(1), pp. 41-59
|
|
|
|
|
Narangerel, A, Lee, JH and Stouffs, R (2016)
Daylighting Based Parametric Design Exploration of 3D Facade Patterns
, 34th eCAADe Conference, At Oulu, Finland, 2, pp. 379-388
|
|
|
|
|
Rahimzadeh, SD, Garcia-Hansen, V, Drogemuller, R and Isoardi, G (2013)
Parametric Modelling for the efficient daylight strategies with complex geometries
, The 47th International Conference of the Architectural Science Association
|
|
|
|
|
Rutten, D (2013)
Galapagos: On the logic and limitations of generic solvers
, Architectural Design, 83(2), pp. 132-135
|
|
|
|
|
Stevanovic, S (2013)
Optimization of passive solar design strategies: A review
, Renewable and Sustainable Energy Reviews, 25, pp. 177-196
|
|
|
|
|
Turrin, M, Von Buelow, P and Stouffs, R (2011)
Design explorations of performance driven geometry in architectural design using parametric modeling and genetic algorithms
, Advanced Engineering Informatics, 25(4), pp. 656-675
|
|
|
|
|
van Berkel, B, Minderhoud, T, Piber, A and Gijzen, G (2014)
Desgin Innovation from PV-Module to Building Envelope: Architectural Layering and non Apparent Repetition
, 29th European Photovoltaic Solar Energy Conference and Exhibition, pp. 366-372
|
|
|
|
|
Wortmann, T and Nannicini, G (2016)
Black-box optimization for architectural design: An overview and quantitative comparison of metaheuristic , direct search , and model-based optimization methods
, CAADRIA 2016,, Melbourne, p. 177-186
|
|
|
|
|
Wortmann, T (2017)
Opossum
, Proceedings of the 22nd International Conference of the Association for Computer-Aided Architectural Design Research in Asia, Hong Kong, pp. 283-292
|
|
|
|
| last changed |
2022/06/07 07:58 |
|
