| id |
ecaade2017_094 |
| authors |
Jovanovic, Marko, Vucic, Marko, Mitov, Dejan, Tepavčević, Bojan, Stojakovic, Vesna and Bajsanski, Ivana |
| year |
2017 |
| title |
Case Specific Robotic Fabrication of Foam Shell Structures |
| source |
Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 135-142 |
| doi |
https://doi.org/10.52842/conf.ecaade.2017.2.135
|
| summary |
Most recent developments in the design of free form shells pursue new approaches in digital fabrication based on material properties and construction-aware design. In this research we proposed an alternative approach based on implementation of expanded polystyrene (EPS), a non-standard material for shells, in the process of industrial robot fabrication that enables fast and precise cutting of building elements. Main motivation for using EPS as a building material was driven by numerous advantages when compared to commonly used materials such as: recycleability, cost-efficiency, high earthquake resistance, durability and short assembly time. We describe case specific fabrication approach based on numerous production constraints (size of the panels, limited robot workspace, in situ conditions) that directly design the process. |
| keywords |
computational design; shell structures; robotic fabrication; hot-wire cutting; multi-robot control |
| series |
eCAADe |
| email |
|
| full text |
 file.pdf (5,018,879 bytes) |
| references |
Content-type: text/plain
|
Brander, D, Baerentzen, A, Clausen, K, Fisker, A, Gravesen, J, Lund, M, Norbjerg, T, Steenstrup, K and Sondergaard, A (2016)
 Designing for Hot-Blade Cutting; Geometric Approaches for High-Speed Manufacturing of Doubly-Curved Architectural Surfaces
, Advances in Architectural Geometry 2016, Zurich, pp. 306 - 327
|
|
|
|
|
Brander, D, Gravesen, J and N?rbjerg, T.B. (2017)
Approximation by planar elastic curves
, Advances in Computational Mathematics, 43, pp. 1-19
|
|
|
|
|
Eigensatz, M., Kilian, M., Schiftner, A., Mitra, N.J., Pottmann, H. and Pauly, M. (2010)
Paneling architectural freeform surfaces
, ACM transactions on graphics, 29, p. 45
|
|
|
|
|
Jovanovic, M, Rakovic, M, Tepavcevic, B, Borovac, B and Nikolic, M (2017)
Robotic fabrication of freeform foam structures with quadrilateral and puzzle shaped panels
, Automation in Construction, 74, pp. 28-38
|
|
|
|
|
La Magna, R, Waimer, F and Knippers, J (2016)
Coreless Winding and Assembled Core-Novel fabrication approaches for FRP based components in building construction
, Construction and Building Materials, 127, pp. 1009-1016
|
|
|
|
|
Mcgee, W, Feringa, J and S?ndergaard, A (2013)
Processes for an Architecture of Volume
, Rob| Arch 2012, pp. 62-71
|
|
|
|
|
Pigram, D and McGee, W (2011)
Formation Embedded Design
, Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), pp. 122-131
|
|
|
|
|
Pottmann, H., Schiftner, A., Bo, P., Schmiedhofer, H., Wang, W., Baldassini, N. and Wallner, J. (2008)
Freeform surfaces from single curved panels
, ACM Transactions on Graphics, 27, p. 76
|
|
|
|
|
Richardson, J.N., Adriaenssens, S., Coelho, R.F. and Bouillard, P. (2013)
Coupled form-finding and grid optimization approach for single layer grid shells
, Engineering structures, 52, pp. 230-239
|
|
|
|
|
Rippmann, M and Block, P (2011)
Digital Stereotomy: Voussoir geometry for freeform masonry-like vaults informed by structural and fabrication constraints
, Proceedings of the IABSE-IASS Symposium
|
|
|
|
|
Rippmann, M and Block, P (2011)
New design and fabrication methods for freeform stone vaults based on ruled surfaces
, Computational Design Modelling, pp. 181-189
|
|
|
|
|
Rippmann, M., Van Mele, T., Popescu, M., Augustynowicz, E., Echenagucia, M.,T., Barentin, C.C, Frick, U., Block, P. (2016)
The Armadillo Vault
, Advances in Architectural Geometry 2016, Zurich, pp. 344 - 363
|
|
|
|
|
Rust, R, Gramazio, F and Kohler, M (2016)
Force Adaptive Hot-Wire Cutting
, Advances in Architectural Geometry 2016
|
|
|
|
|
Rust, R, Jenny, D, Gramazio, F and Kohler, M (2016)
Spatial Wire Cutting: Cooperative robotic cutting of non-ruled surface geometries for bespoke building components, Living Systems and Micro-Utopias: Towards Continuous Designing
, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016), Melbourne, pp. 529-538
|
|
|
|
|
Wang, C.C. and Elber, G (2014)
Multi-dimensional dynamic programming in ruled surface fitting
, Computer-Aided Design, 51, pp. 39-49
|
|
|
|
|
Wang, T.H., Krishnamurti, R and Shimada, K (2014)
Restructuring surface tessellation with irregular boundary conditions
, Frontiers of Architectural Research, 3, pp. 337-347
|
|
|
|
|
Wu, K and Kilian, A (2016)
Developing Architectural Geometry Through Robotic Assembly and Material Sensing
, Robotic Fabrication in Architecture, Art and Design 2016, pp. 240-249
|
|
|
|
| last changed |
2022/06/07 07:52 |
|
