| id |
ecaade2020_456 |
| authors |
Farinea, Chiara, Awad, Lana, Dubor, Alex and El Atab, Mohamad |
| year |
2020 |
| title |
Integrating biophotovoltaic and cyber-physical technologies into a 3D printed wall |
| doi |
https://doi.org/10.52842/conf.ecaade.2020.2.463
|
| source |
Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 463-472 |
| summary |
The research presented in this paper investigates the development of "3D printed ceramic green wall", a technological Nature Based Solution (NBS) aimed at regenerating urban areas by improving spatial quality and sustainability through clean and autonomous energy production. Building upon previous research, the challenge of this system is to adapt additive manufacturing processes of ceramic 3D printing with biophotovoltaic systems while simultaneously developing digital and cyber-physical frameworks to generate site and user responsive design and autonomous solutions that optimize system performance and energy generation. The paper explores the complex design negotiations between these drivers, focusing particularly on their performance optimization, and finally highlights the system potential as exemplified through a successful implementation of a 1:1 site responsive wall prototype. |
| keywords |
Nature based solutions; biophotovoltaic systems; additive manufacturing; responsive design; cyber-physical networks; augmented reality |
| series |
eCAADe |
| email |
|
| full text |
 file.pdf (18,479,854 bytes) |
| references |
Content-type: text/plain
|
Bauduceau, N. (2013)
 Towards an EU research and innovation policy agenda for nature-based solutions & re-naturing cities: Final report of the Horizon 2020 expert group on
, Publications Office of the European Union, Brussels
|
|
|
|
|
Beesley, P. and Hastings, S. (eds) (2019)
Living Architecture Systems Group LASG Symposium 2019 Proceedings
, Riverside Architectural Press, Toronto
|
|
|
|
|
Biswas, K, Rose, J, Eikevik, L, Guerguis, M, Enquist, P, Lee, B, Love, L, Green, J and Jackson, R (2017)
Additive Manufacturing Integrated Energy-Enabling Innovative Solutions for Buildings of the Future
, Journal of Solar Engineering, 139, pp. 2-12
|
|
|
|
|
Briscoe, D. (2014)
Parametric Planting: Green Wall System Research + Design using BIM
, Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), Los Angeles, pp. 333-338
|
|
|
|
|
Chee, FP, Chen, CA, Chang, J, Choo, YY and Dayou, J (2016)
Data Acquisition System for In Situ Monitoring of Chemoelectrical Potential in Living Plant Fuel Cells
, Journal of Biophysics, 1, pp. 2-7
|
|
|
|
|
Decker, M., Hahn, G. and Harris, L. M. (2016)
Bio-Enabled Façade Systems: Managing Complexity of Life through Emergent Technologies
, Proceedings of the 34th eCAADe, Oulu, pp. 603-612
|
|
|
|
|
Dubor, A., Cabay, E. and Chronis, A. (2017)
Energy Efficient Design for 3D Printed Earth Architecture
, De Rycke, K., Gengnagel, C., Baverel, O., Burry, J., Mueller, C., Man Nguyen, M., Rahm, P. and Ramsgaard Thomsen, M. (eds), Humanizing Digital Reality: Design Modelling Symposium Paris 2017, Springer Singapore, Singapore, pp. 383-393
|
|
|
|
|
He, Y, Zhang, Y, Zhang, C and Zhou, H (2020)
Energy-saving potential of 3D printed concrete building with integrated living wall
, Energy and Buildings, 222, pp. 2-13
|
|
|
|
|
Isolda, A. J. and Habert, G. (2016)
An environmental perspective on digital fabrication in architecture and construction
, Living Systems and Micro-Utopias: Towards Continuous Designing (CAADRIA 2016), Melbourne, pp. 797-806
|
|
|
|
|
Kargul, J, Bubak, G and Andryianau, G (2018)
Biophotovoltaic Systems Based on Photosynthetic Complexes
, Urben, P (eds), Chemistry, Molecular Sciences and Chemical Engineering, Elsevier
|
|
|
|
|
Seibold, Z., Hinz, K., García del Castillo y López, J. L., Martínez Alonso, N., Mhatre, S. and Bechthold, M. (2018)
Ceramic Morphologies. Precision and control in paste-based additive manufacturing
, Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), Mexico City, pp. 350-357
|
|
|
|
|
Tay, YWD, Panda, B, Paul, SC, Mohamed, NAN, Tan, MJ and Leong, KF (2017)
3D printing trends in building and construction industry
, Virtual and Physical Prototyping, 12, pp. 261-276
|
|
|
|
|
van Woensel, R. N. P., van Oirschot, T., Burgmans, M. J. H., Mohammadi, M. and Hermans, K. (2018)
Printing Architecture: an overview of existing and promising additive manufacturing methods and their application in the building industry
, International Journal of the Constructed Environment, 9(1), pp. 57-81
|
|
|
|
|
Wey, LT, Bombelli, P, Chen, X, Lawrence, JM, Rabideau, C, Rowden, SJL, Zhang, JZ and How, CJ (2019)
The Development of Biophotovoltaic Systems for Power Generation and Biological Analysis
, ChemElectroChem, 6, pp. 5375-5386
|
|
|
|
| last changed |
2022/06/07 07:55 |
|
