| id |
ecaade2022_324 |
| authors |
Lin, Yu-Ting and Hsu, Pei-Hsien |
| year |
2022 |
| title |
Dynamic Inflatable Structures and Digital Fabrication Process |
| doi |
https://doi.org/10.52842/conf.ecaade.2022.1.311
|
| source |
Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 311–320 |
| summary |
Inflatable structures made of flat film materials have an advantage of low cost, lightweight and rapid deployment, but the variation of their forms is relatively limited, and it is a challenge to produce pneumatic deformations. This paper proposes a designing and manufacturing process of inflatable structures which are made of flat film materials and are able to perform dynamic movements. The process includes steps in which a target 3D surface is produced through programmed 2D paths heat-sealed on flat films of different thickness, leading to a structure composed of air chambers. A parametric modelling procedure and associated principles are developed for the relationship between the forms of a flat-film-based inflatable structure and the heat sealing patterns on the film. A system of double-layer air chambers was designed to control the direction of bending movements. In addition, the form variation of a designed inflatable structure can be achieved by a parametric design process described in this paper. |
| keywords |
Pneumatic Structural System, Inflatable Structure, Digital Fabrication, Design Tool, Kinetic Structure |
| series |
eCAADe |
| email |
|
| full text |
 file.pdf (1,580,771 bytes) |
| references |
Content-type: text/plain
|
Choi, K. Y., & Ishii, H. (2021)
 Therms-Up!: DIY Inflatables and Interactive Materials by Upcycling Wasted Thermoplastic Bags
, Proceedings of the Fifteenth International Conference on Tangible, Embedded, and Embodied Interaction (pp. 1-8). Available at: https://dl.acm.org/doi/abs/10.1145/3430524.3442457 (Accessed 30 March 2022)
|
|
|
|
|
Igarashi, Y., & Igarashi, T. (2009)
Designing plush toys with a computer
, Communications of the ACM, 52(12), 81-88. Available at: https://dl.acm.org/doi/abs/10.1145/1610252.1610275 (Accessed 30 March 2022)
|
|
|
|
|
Jiang, H., Liu, X., Chen, X., Wang, Z., Jin, Y., & Chen, X. (2016)
Design and simulation analysis of a soft manipulator based on honeycomb pneumatic networks
, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO) (pp. 350-356). IEEE. Available at: https://ieeexplore.ieee.org/abstract/document/7866347 (Accessed 30 March 2022)
|
|
|
|
|
Li, S., Vogt, D. M., Rus, D., & Wood, R. J. (2017)
Fluid-driven origami-inspired artificial muscles
, Proceedings of the national academy of sciences, 114(50), 13132-13137. Available at: https://www.pnas.org/doi/10.1073/pnas.1713450114 (Accessed 30 March 2022)
|
|
|
|
|
Mosadegh, B., Polygerinos, P., Keplinger, C., Wennstedt, S., Shepherd, R. F., Gupta, U., Shim, J., Bertoldi, K., Walsh, C. J., & Whitesides, G. M. (2014)
Pneumatic networks for soft robotics that actuate rapidly
, Advanced functional materials, 24(15), 2163-2170. Available at: https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.201303288 (Accessed 30 March 2022)
|
|
|
|
|
Ou, J., Skouras, M., Vlavianos, N., Heibeck, F., Cheng, C. Y., Peters, J., & Ishii, H. (2016)
aeroMorph-heat-sealing inflatable shape-change materials for interaction design
, Proceedings of the 29th Annual Symposium on User Interface Software and Technology (pp. 121-132). Available at: https://dl.acm.org/doi/abs/10.1145/2984511.2984520 (Accessed 30 March 2022)
|
|
|
|
|
Shepherd, R. F., Ilievski, F., Choi, W., Morin, S. A., Stokes, A. A., Mazzeo, A. D., Chen, X., Wang, M., & Whitesides, G. M. (2011)
Multigait soft robot
, Proceedings of the national academy of sciences, 108(51), 20400-20403. Available at: https://www.pnas.org/doi/abs/10.1073/pnas.1116564108 (Accessed 30 March 2022)
|
|
|
|
|
Skouras, M., Thomaszewski, B., Kaufmann, P., Garg, A., Bickel, B., Grinspun, E., & Gross, M. (2014)
Designing inflatable structures
, ACM Transactions on Graphics (TOG), 33(4), 1-10. Available at: https://dl.acm.org/doi/abs/10.1145/2601097.2601166 (Accessed 30 March 2022)
|
|
|
|
|
Sparrman, B., Kernizan, S., Laucks, J., Tibbits, S., & Guberan, C. (2019)
Liquid printed pneumatics
, ACM SIGGRAPH 2019 Emerging Technologies (pp. 1-2). Available at: https://dl.acm.org/doi/abs/10.1145/3305367.3340318 (Accessed 30 March 2022)
|
|
|
|
|
Yamada, Y., & Nakamura, T. (2020)
Actuatable flexible large structure using a laminated foam-based soft actuator
, 2020 IEEE/SICE International Symposium on System Integration (SII) (pp. 74-79). IEEE. Available at: https://ieeexplore.ieee.org/abstract/document/9026003 (Accessed 30 March 2022)
|
|
|
|
|
Yao, L., Niiyama, R., Ou, J., Follmer, S., Della Silva, C., & Ishii, H. (2013)
PneUI: pneumatically actuated soft composite materials for shape changing interfaces
, Proceedings of the 26th annual ACM symposium on User interface software and Technology (pp. 13-22). Available at: https://dl.acm.org/doi/abs/10.1145/2501988.2502037 (Accessed 30 March 2022)
|
|
|
|
| last changed |
2024/04/22 07:10 |
|
