| id |
ecaade2022_360 |
| authors |
Azambuja Varela, Pedro, Lacroix, Igor, Güzelci, Orkan Zeynel and Sousa, José Pedro |
| year |
2022 |
| title |
Democratizing Stereotomic Construction through AR Technologies - A reusable mold methodology to the production of customized voussoirs using HoloLens |
| source |
Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 225232 |
| doi |
https://doi.org/10.52842/conf.ecaade.2022.1.225
|
| summary |
Mass customizing of building components allows new conditions to explore aesthetic and sustainability in architecture. However, such possibilities tend to require the use of expensive and heavy digital fabrication machinery, which is seldomly available in most regions on the planet. In this context, this paper presents a research in progress that explores Augmented Reality (AR) to support craft production of customized stereotomic components. As a portable technology, the work examines the potential of AR to materialize design solutions that are geometrically complex and variable. Considering the current research on augmented fabrication processes, this work contributes to producing variable building components for stereotomic construction with a focus on earth-based materials. Extending the findings of a recently completed PhD thesis, the work replaces the use of a robot with the HoloLens glasses and Fologram application to produce low- cost and reusable molds. This augmented fabrication setup allows the human control of the production of variable molds, ready for casting and assembly of stereotomic components. This work addresses several of the NEB and UN SDGs goals. |
| keywords |
Stereotomy, Augmented Reality, Augmented Fabrication, Customized Production, New European Bauhuas |
| series |
eCAADe |
| email |
|
| full text |
 file.pdf (1,496,462 bytes) |
| references |
Content-type: text/plain
|
Abe, A.U., Hotta, H.K., Takami, T.Y., Ikeda, I.H. and Ikeda, I.Y. (2017)
 Digital Construction - Demonstration of Interactive Assembly Using Smart Descrete Papers with RFID and AR codes, Protocols, Flows, and Glitches
, Proceedings of the 22nd CAADRIA, Suzhou, China, pp. 75-84. Available at: http://papers.cumincad.org/data/works/att/caadria2017_131.pdf (Accessed 31 March 2022)
|
|
|
|
|
Azambuja Varela, P. and Sousa, J.P. (2017)
Fabricating Stereotomy - Variable moulds for cast voussoirs
, Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, pp. 193-200
|
|
|
|
|
Azambuja Varela, P. and Sousa, J.P. (2018)
Reinforced, Reusable, Reconfigurable Molds for Cast Voussoirs
, Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, pp. 771-780
|
|
|
|
|
Azambuja Varela, P. (2020)
Reconstruction of a Stereotomy - for a multi-semantic stereotomic approach
, PhD Thesis, University of Porto
|
|
|
|
|
Bhooshan, S., Dell'Endice, A., Du, C., Bouten, S., Van Mele, T. and Block, P. (2021)
Striatus-3D concrete printed masonry bridge
, Venice, Italy, 2021 [Online]. Available at: https://block.arch.ethz.ch/brg/project/striatus-3d-concrete-printed-masonry-bridge-venice-italy-2021 (Accessed 31 March 2022)
|
|
|
|
|
Chi, H.L., Kang, S.C. and Wang, X. (2013)
Research trends and opportunities of augmented reality applications in architecture, engineering, and construction
, Automation in Construction, 33, pp. 116-122. Available at: https://doi.org/10.1016/j.autcon.2012.12.017 (Accessed 31 March 2022)
|
|
|
|
|
Fazel, A. and Izadi, A. (2018)
An interactive augmented reality tool for constructing free-form modular surfaces
, Automation in Construction, 85, pp. 135-145. Available at: https://doi.org/10.1016/j.autcon.2017.10.015 (Accessed 31 March 2022)
|
|
|
|
|
Jahn, G., Newnham, C., and Beanland, M. (2018)
Making in Mixed Reality. Holographic design, fabrication, assembly and analysis of woven steel structures
, Proceeding of ACADIA 2018, Mexico City, Mexico, pp. 88-97. Available at: http://papers.cumincad.org/data/works/att/acadia18_88.pdf (Accessed 31 March 2022)
|
|
|
|
|
Jahn, G., Wit, A. and Samara, J.P. (2019)
[BENT] Holographic handcraft in large-scale steam-bent timber structures
, Proceedings of ACADIA 2019, Austin, Texas, pp. 2-11. Available at: http://papers.cumincad.org/data/works/att/acadia19_438.pdf (Accessed 31 March 2022)
|
|
|
|
|
Kolarevic, B. and Duarte, J. P. (2019)
Mass customizing and design democratization
, London & New York: Routledge
|
|
|
|
|
Mitterberger, D., Dörfler, K., Sandy, T., Salveridou, F., Hutter, M., Gramazio, F. and Kohler, M. (2020)
Augmented bricklaying
, Construction Robotics, 4(3), pp. 151-161
|
|
|
|
|
Morse, C., Martinez-Parachini, E., Richardson, P., Wynter, C. and Cerone, J. (2020)
Interactive design to fabrication, immersive visualization and automation in construction
, Construction Robotics, 4(3), pp. 163-173. Available at: https://doi.org/10.1007/s41693-020-00039-4 (Accessed 31 March 2022)
|
|
|
|
|
Pigram, D., Larsen, N. M. and Pedersen, O.E. (2012)
A Method for the Realization of Complex Concrete Gridshell Structures in Precast Concrete
, Proceedings of ACADIA 2012, pp. 209-216. Available at: http://cumincad.architexturez.net/system/files/pdf/acadia12_209.content.pdf (Accessed 31 March 2022)
|
|
|
|
|
Song, Y., Koeck, R. and Luo, S. (2021)
Review and analysis of augmented reality (AR) literature for digital fabrication in architecture
, Automation in Construction, 128, 103762. Available at: https://www.sciencedirect.com/science/article/pii/S0926580521002132 (Accessed 31 March 2022)
|
|
|
|
|
Song, Y. (2020)
BloomShell: augmented reality for the assembly and realtime modification of complex curved structure
, Proceedings of eCAADe 2020, Berlin, Germany, pp. 345-354. Available at: http://papers.cumincad.org/data/works/att/ecaade2020_030.pdf (Accessed 31 March 2022)
|
|
|
|
|
Sun, C., Zheng, Z., Wang, Y. and Sun, T. (2018)
Hybrid Fabrication: A Freeform Building Process with High Onsite Flexibility and Acceptable Accumulative Error
, Proceedings of ACADIA 2018, pp. 82-87. Available at: http://papers.cumincad.org/data/works/att/acadia18_82.pdf (Accessed 31 March 2022)
|
|
|
|
|
Wibranek, B. and Tessmann, O. (2019)
Digital Rubble Compression-Only Structures with Irregular Rock and 3D Printed Connectors in Proceedings of the IASS Annual Symposium 2019
, Barcelona, Spain, pp. 1-8. Available at: https://www.researchgate.net/publication/337077845_Digital_Rubble_-_Compression-Only_Structures_with_Irregular_Rock_and_3D_Printed_Connectors (Accessed 31 March 2022)
|
|
|
|
| last changed |
2024/04/22 07:10 |
|
