| id |
ecaade2022_51 |
| authors |
Lüling, Claudia and Carl, Timo |
| year |
2022 |
| title |
Fuzzy 3D Fabrics & Precise 3D Printing - Combining research with design-build investigations |
| source |
Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 67–76 |
| doi |
https://doi.org/10.52842/conf.ecaade.2022.1.067
|
| summary |
We present a synergetic combination of two previously separate process technologies to create novel lightweight structures. 3D textiles and 3D printing. We will outline the development of a novel material system that consisted of flexible and foldable 3D textiles that are combined with stiff, linear 3D printed materials. Our aim is to produce material-reduced lightweight elements for building applications with an extended functionality and recyclability. Within an ongoing research project (6dTEX), we explore a mono-material system, which uses the same base materials for both the filament for 3D printing and the yarn of the fabrication of the 3D textiles. Based on preliminary 3D printing tests on flat textiles key process parameters were identified. Expertise has been established for 3D printing on textiles as well as for using printable recycled polyester materials (PES textile and PETG filament. Lastly for 3D printing on non-combustible material (alkali-resistant (AR) glass textiles and for 3D concrete printing (3DCP). The described process- knowledge facilitates textile architectures with an extended vocabulary, ranging from flat to single curved and folded topologies. Whereas the foundations are laid in the research project on a meso scale, we also extended our explorations into an architectural macro scale. For this, we used a more speculative design-build studio that was based on a more loose combination of 3D textiles and 3D printed elements. Lastly, we will discuss, how this first architectural application beneficially informed the research project. |
| keywords |
Material-Based Design, Additive Manufacturing, Design-Build, Parametric Modelling, Form-Finding, Co-Creation, Lightweight Structures, Single-Origin Composites, Space Fabrics |
| series |
eCAADe |
| email |
|
| full text |
 file.pdf (1,484,433 bytes) |
| references |
Content-type: text/plain
|
Berdos,Y., Agkathidis, A. and Brown, A. (2019)
 Architectural hybrid material composites: computationally enabled techniques to control form generation
, Architectural Science Review, DOI: 10.1080/00038628.2019.1666357
|
|
|
|
|
Carl, T. Schein, M. (2019)
A Parametric Framework for Solar Tensile Structures - Bridging the Gap between Conception and Construction in Impact
, Design with all senses, Mette Ramsgaard Thomsen, Martin Tamke, Christoph Gengnagel, Billie Faircloth, Fabian Scheurer, (eds.), Springer
|
|
|
|
|
Gorlachova, M., Mahltig, B. (2021)
3D-printing on textiles - an investigation on adhesion properties of the produced composite materials
, Journal of Polymer Research, 28:207. Access: doi: 10.1007/s10965-021-02567-1
|
|
|
|
|
Grothe, Timo; Brockhagen, Bennet; Storck, Jan Lukas (2020)
Three-dimensional printing resin on different textile substrates using stereolithography: A proof of concept.
, Journal of Engineered Fibers and Fabrics, 15, p. 1-7. Access: doi: 10.1177/1558925020933440
|
|
|
|
|
Kalthoff, M.; Raupach, M.; Matschei, T. (2021)
Investigation into the Integration of Impregnated Glass and Carbon Textiles in a Laboratory Mortar Extruder (LabMorTex)
, Materials 14, 7406 - https://doi.org/10.3390/ma14237406
|
|
|
|
|
Koch, H.C., Schmelzeisen, D., Gries, T. (2021)
4D Textiles Made by Additive Manufacturing on Pre-Stressed Textiles-An Overview
, Actuators 2021, 10, 31. Zugriff: doi: 10.3390/act10020031
|
|
|
|
|
Lynn G., (1993)
Folding in Architecture Architectural Design
, Chichester : Wiley-Academy
|
|
|
|
|
Lüling, C., Rucker-Gramm, P., Weilandt, A. et al. (2022)
Advanced 3D Textile Applications for the Building Envelope
, Appl Compos Mater 29 p. 343-356, https://doi.org/10.1007/s10443-021-09941-8
|
|
|
|
|
Malengier, Benny; Hertleer, Carla; Cardon, Ludwig; Van Langenhove, Lieva (2018)
3D Printing on Textiles: Testing of Adhesion.
, J Fashion Technol Textile, 2018, p. 4. Access: doi:10.4172/2329-9568.S4-013
|
|
|
|
|
Naldoni, L., Casarotti, A., Erioli, A. (2018)
Temporary shell systems based on robotic mud deposition
, Proceedings of the IASS Symposium 2018 https://www.researchgate.net/publication/332290835_Temporary_shell_systems_based_on_robotic_mud_depositionNarula, A.; Pastore, C. M.; Schmelzeisen, D.; El Basri, S.; Schenk, J.; Shajoo, S., 2018: Effect of knit and print parameters on peel strength of hybrid 3-D printed textiles. Journal of Textiles and Fibrous Materials, 1:1-10. Access: doi:10.1177/2515221117749251
|
|
|
|
|
Pei, Eujin; Shen, Jinsong; Watling, Jennifer (2015)
Direct 3D printing of polymers onto textiles: Experimental studies and applications
, Rapid Prototyping Journal 21/5, p. 556-571. Access: doi: 10.1108/RPJ-09-2014-0126
|
|
|
|
|
Piker, D. (2013)
Kangaroo: Form Finding with Computational Physics
, Architectural Design, 83(2), p. 136-137
|
|
|
|
|
Preisinger, C., Heimrath, M. (2014)
Karamba - A toolkit for parametric structural design
, Structural Engineering International Vol 24 Issue 2
|
|
|
|
|
Rippmann, M., A. Liew, T. Van Mele, P. Block (2018)
Design, fabrication and testing of discrete 3D sand-printed floor prototypes
, Materials Today Communications Volume 15 Pages 254-259 https://doi.org/10.1016/j.mtcomm.2018.03.005
|
|
|
|
|
Voney, V., Odaglia, P., Schenker, F., Brumaud, C., Dillenburger, B., Habert, G; (2020)
IOP Conference Series
, Earth and Environmental Science Volume 588, 1.11 - 1.14
|
|
|
|
|
Čuk, Marjeta; Bizjak, Matejka; Muck, Deja; Kočevar, Tanja Nuša (2020)
3D printing and functionalization of textiles
, University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design. Access: doi: 10.24867/GRID-2020-p56
|
|
|
|
| last changed |
2024/04/22 07:10 |
|
