| id |
ecaadesigradi2019_073 |
| authors |
Junk, Stefan, Niederhüfner, Michelle, Borkowska, Nina and Schrock, Steffen |
| year |
2019 |
| title |
Direct Digital Manufacturing of Architectural Models using Binder Jetting and Polyjet Modeling |
| doi |
https://doi.org/10.52842/conf.ecaade.2019.1.451
|
| source |
Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 451-456 |
| summary |
Today, architectural models are an important tool for illustrating drawn-on plans or computer-generated virtual models and making them understandable. In addition to the conventional methods for the manufacturing of physical models, a wide range of processes for Direct Digital Manufacturing (DDM) has spread rapidly in recent years. In order to facilitate the application of these new methods for architects, this contribution examines which technical and economic results are possible using 3D printed architectural models. Within a case study, it will be shown on the basis of a multi-storey detached house, which kind of data preparation is necessary. The DDM of architectural models will be demonstrated using two widespread techniques and the resulting costs will be compared. |
| keywords |
Architeetual model; CAAD; Direct Digital Manufacturing; Binder Jetting; Polyjet Modelling |
| series |
eCAADeSIGraDi |
| email |
|
| full text |
 file.pdf (4,274,671 bytes) |
| references |
Content-type: text/plain
|
Gibson, I, Kvam, T and Wai Ming, L (2002)
 Rapid prototyping for architectural models
, Rapid Prototyping Journal, 8 (2), p. 91-95
|
|
|
|
|
Hull, C and Willet, W (2017)
Building with Data: Architectural Models as Inspiration for Data Phyicalization
, Proceedings of CAHI 2017, pp. 1217-1228
|
|
|
|
|
Junk, S and Gawron, P (2018)
Implementation of Innovative Methods for the Digital Manufacturing of Architectural Models
, Int. Journal of Contemporary Architecture "The New ARCH", Vol. 5, No. 2, pp. 1-8
|
|
|
|
|
Mancanares, CG, Zancul, E, Cavalcante da Silva, J and Cauchick, MPA (2015)
Additive manufacturing process selection based on parts' selection criteria
, Int J Adv Manuf Technol, 80 (5-8), p. 1007-1014
|
|
|
|
|
Meijs, P (2014)
Rapid Prototyping and 3D Printing in Architecture
, Blurb books
|
|
|
|
|
Ryder, G, Ion, B, Green, G, Harrison, D and Wood, B (2002)
Rapid design and manufacture tools in architecture
, Automation in Construction, 11 (3), p. 279-290
|
|
|
|
|
Stavric, M, Siddanin, P and Tepavcevic, B (2013)
Architectural Scale Models in the Digital Age: Design, Representation and Manufacturing
, Springer
|
|
|
|
|
Wohlers, T (2017)
Wohlers report 2017. 3D printing and additive manufacturing state of the industry annual worldwide progress report. Fort Collins, Col.: Wohlers Associates.
, Wohlers Associates
|
|
|
|
|
Wong, KV and Hernandez, A (2012)
A Review of Additive Manufacturing
, ISRN Mechanical Engineering(4), pp. 1-10
|
|
|
|
|
Zegard, T and Paulino, GH (2016)
Bridging topology optimization and additive manufacturing
, Struct Multidisc Optim, 53 (1), p. 175-192
|
|
|
|
| last changed |
2022/06/07 07:52 |
|
