| id |
ecaadesigradi2019_239 |
| authors |
Garrido, Federico and Meyer, Joost |
| year |
2019 |
| title |
Dexterity-controlled Design Procedures |
| source |
Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 659-668 |
| doi |
https://doi.org/10.52842/conf.ecaade.2019.1.659
|
| summary |
This paper explores the development of design procedures in relationship to their digital proceedings, in order to interface human movement and parametric design procedures. The research studied the use of Leap Motion controller, a gesture recognition device using infrared sensors combined with time-based generative tools in Rhinoceros Grasshopper. A physical, artistic procedure was used as a reference to model a digital design procedure, including a series of parametric definitions combined with them in an attempt to produce complex three-dimensional designs in real time. In a later stage of this research, a modular, open source, digitizing arm was developed to capture hand movement and interact with an autonomous parametric definition, augmenting even more the range of applications of dexterity-based digital design. The challenge of this experimental investigation lies in the negotiation of the designer's needs for a complex yet open design process and the possibilities of defined soft- and hardware solutions. |
| keywords |
digital design; dexterity; parametric design; motion detection |
| series |
eCAADeSIGraDi |
| email |
|
| full text |
 file.pdf (23,411,692 bytes) |
| references |
Content-type: text/plain
|
Adamson, G (2007)
 Thinking through craft
, Berg Publishers, London
|
|
|
|
|
Hinton, K (2010)
The Craft of Digital Toolin
, Master's Thesis, Royal College of Art
|
|
|
|
|
Marin, G, Dominio, F and Zanuttigh, P (2014)
Hand gesture recognition with leap motion and kinect devices
, 2014 IEEE International Conference on Image Processing (ICIP), Paris, pp. 1565-1569
|
|
|
|
|
Payne, A (2011)
A five-axis robotic motion controller for designers
, Proceedings 31st Conference, Association for Computer-Aided Design in Architecture, Calgary / Banff, pp. 162-169
|
|
|
|
|
Warnier, C (eds) (2014)
Printing things: visions and essentials for 3D printing
, Gestalten, Berlin
|
|
|
|
|
Willis, K D D (2010)
Spatial sketch: bridging between movement & fabrication
, Proceedings of the fourth international conference on tangible, embedded, and embodied interaction, Cambridge, Massachusetts
|
|
|
|
| last changed |
2022/06/07 07:51 |
|
