| id |
sigradi2009_1012 |
| authors |
Celani, Gabriela; Laura Cancherini |
| year |
2009 |
| title |
Digitalização tridimensional de objetos: um estudo de caso [Scanning Three-dimensional Objects: A Case Study] |
| source |
SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009 |
| summary |
The present research is an exploratory study about medium-range 3D-scanning technologies for architectural applications. Its purpose was to gather information that will subside the future acquisition of a 3D-scanning equipment for the Laboratory for Automation and Prototyping for Architecture and Construction, LAPAC, at the University of Campinas (UNICAMP). In order to test some of these technologies, some experiments were carried out. Museum sculptures were digitized and the results were 3D-printed. Preliminary results show that accurate technologies are still very expensive, but there are some alternative, more accessible technologies, based on photogrammetry, which can lead to fairly good results. |
| keywords |
Digitalização 3D; scanner 3D; photogrametria; maquete arquitetônica. |
| series |
SIGRADI |
| email |
|
| full text |
 file.pdf (634,854 bytes) |
| references |
Content-type: text/plain
|
Achille, C., Brumana, R., Fassi, F., Fregonese, L., Monti, C., Taffurelli, L. and Vio, E. (2007)
 TRANSPORTABLE 3D ACQUISITION SYSTEMS FOR CULTURAL HERITAGE: REVERSE ENGINEERING AND RAPID PROTOTYPING OF THE BRONZE LIONS OF THE SAINT ISIDORO CHAPEL IN THE BASILICA OF SAN MARCO IN VENICE
, XXI International CIPA Symposium, 01-06 October. Athenas
|
|
|
|
|
Barber, D., J. Mills and P. Bryan (2001)
Laser Scanning and Photogrammetry: 21st Century Metrology
, Proceedings of the Surveying and Documentation of Historic Buildings - Monuments - Sites Traditional and Modern Methods, CIPA 2001 International Symposium, Potsdam
|
|
|
|
|
Boehler, W., G. Heinz and A. Marbs (2001)
The Potential of Non-contact Close Range Laser Scanners for Cultural Heritage Recording
, XVIII CIPA International Symposium, Potsdam, Germany, Proceedings (2001). 8
|
|
|
|
|
Celani, G., Cancherini, L., Jardini, A., Oliveira, M., Lopes da Silva, J. V., e Piccoli, V. (2009)
3D digitation of museum sculptures for model-making purposes: difficulties and possible solutions
, Anais do VRAP 2009. Lisboa, 2009
|
|
|
|
|
Iuliano, L. and Minetola, P. (2005)
RAPID MANUFACTURING OF SCULPTURES REPLICAS: A COMPARISON BETWEEN 3D OPTICAL SCANNERS
, CIPA 2005 XX International Symposium. Torino, 2005
|
|
|
|
|
Sternberg, H., T. Kersten, I. Jahn, and R. Kinzel (2004)
Terrestrial 3D Laser Scanning - Data Acquisition and Object Modelling for Industrial As-Built Documentation and Architectural Applications
, The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol XXXV, Commission VII, Part B2. 2004. 942-947
|
|
|
|
| last changed |
2016/03/10 09:48 |
|
