CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References
id acadia19_470
authors Meyboom, AnnaLisa; Correa, David; Krieg, Oliver David
year 2019
title Stressed Skin Wood Surface Structure
doi https://doi.org/10.52842/conf.acadia.2019.470
source ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 470-477
summary Innovation in parametric design and robotic fabrication is in reciprocal relationship with the investigation of new structural types that facilitated by this technology. The stressed skin structure has historically been used to create lightweight curved structures, mainly in engineering applications such as naval vessels, aircraft, and space shuttles. Stressed skin structures were first referred to by Fairbairn in 1849. In England, the first use of the structure was in the Mosquito night bomber of World War II. In the United States, stressed skin structures were used at the same time, when the Wright Patterson Air Force Base designed and fabricated the Vultee BT-15 fuselage using fiberglass-reinforced polyester as the face material and both glass-fabric honeycomb and balsa wood core. With the renewed interest in wood as a structural building material, due to its sustainable characteristics, new potentials for the use of stressed skin structures made from wood on building scales are emerging. The authors present a material informed system that is characterized by its adaptability to freeform curvature on exterior surfaces. A stressed skin system can employ thinner materials that can be bent in their elastic bending range and then fixed into place, leading to the ability to be architecturally malleable, structurally highly efficient, as well as easily buildable. The interstitial space can also be used for services. Advanced digital fabrication and robotic manufacturing methods further enhance this capability by enabling precisely fabricated tolerances and embedded assembly instructions; these are essential to fabricate complex, multi-component forms. Through a prototypical installation, the authors demonstrate and discuss the technology of the stressed skin structure in wood considering current digital design and fabrication technologies.
series ACADIA
type normal paper
email ameyboom@sala.ubc.ca
full text file.pdf (5,179,840 bytes)
references Content-type: text/plain
Details Citation Select
100%; open Alberta Research Council. (1987) Find in CUMINCAD Stressed skin panels FP 2.3.1 , Canadian Forestry Service, Northern Forestry Centre, Edmonton, Alberta

100%; open Allen, H.G. (1969) Find in CUMINCAD Analysis and Design of Structural Sandwich Panels , Oxford: Pergamon Press

100%; open Bitzer, T.N. (1997) Find in CUMINCAD Honeycomb Technology: Materials, Design, Manufacturing, Applications and Testing , Dordrecth: Springer Science & Business Media

100%; open Cheng, A., T. Gaudin, A. Meyboom, O. Neumann, and T. Tannert. (2015) Find in CUMINCAD Large Scale Wood Surface Structures , ACE 2015 : 3rd Annual International Conference on Architecture and Civil Engineering. Singapore

100%; open Correa, D., O.D. Krieg, and A. Meyboom. (2019) Find in CUMINCAD Beyond Form Definition: Material Informed Digital Fabrication in Timber Construction , Digital Wood Design. Lecture Notes Civil Engineering, vol 24, edited by F. Bianconi and M. Filippucci. Cham: Springer

100%; open del Coz Díaz, J.J., P.J. García Nieto, F. P. Álvarez Rabanal, and C.B. Biempica. (2008) Find in CUMINCAD Finite Element Analysis of Thin-Walled Composite Two-Span Wood-Based Loadbearing Stressed Skin Roof Panels and Experimental Validation , Thin-Walled Structures 46(3): 276-89. https://doi.org/10.1016/j.tws.2007.07.020

100%; open Drawsky, R.H. (1960) Find in CUMINCAD Stressed-Skin Panel Tests , 82. Tacoma, Washington, USA: Douglas Fir Plywood Association

100%; open Fairbairn, William. (1849) Find in CUMINCAD An Account of the Construction of the Britannia and Conway Tubular Bridges , London: J. Weale. Online resource. Accessed August 17, 2019. http://hdl.handle.net/2027/ mdp.39015095176528

100%; open Gerber, C. D. (2007) Find in CUMINCAD Wood Stressed-Skin Panels : An Investigation into Their Behaviour, Load Distribution and Composite Properties , PhD thesis, University of Technology, Sydney, Faculty of Engineering. https://opus.lib.uts.edu.au/handle/10453/37520

100%; open Luengo, E., E. Hermoso, J.C. Cabrero, and F. Arriaga. (2017) Find in CUMINCAD Bonding Strength Test Method Assessment for Cross-Laminated Timber Derived Stressed-Skin Panels (CLT SSP) , Materials and Structures 50(4): 204. https://doi.org/10.1617/s11527-017-1069-8

100%; open Marguerre, K. (1944) Find in CUMINCAD The Optimum Buckling Load of a Flexibly Supported Plate Composed of Two Sheets Joined by a Light Weight Filler, When under Longitudinal Compression , Deutsche Viertaljahrsschrist für Literalurwissenschaft und Giests Geschichte, D.V.L. (ZWB UM1360/2), 28 October

100%; open Michael Davies, J. (2006) Find in CUMINCAD Developments in Stressed Skin Design , Thin-Walled Structures, Tribute Edition to Rolf Baehre, 44(12): 1250–60. https://doi.org/10.1016/j.tws.2007.01.002

100%; open Nicholas, P., D. Stasiuk, E. N?rgaard, C. Hutchinson, and M.R. Thomsen. (2016) Find in CUMINCAD An Integrated Modelling and Toolpathing Approach for a Frameless Stressed Skin Structure, Fabricated Using Robotic Incremental Sheet Forming , Robotic Fabrication Architecture, Art and Design 2016, edited by D. Reinhardt, R. Saunders, and J. Burry, 62–77. Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-26378-6_5

100%; open Plantema, F.J. (1966) Find in CUMINCAD Sandwich Construction: The Bending and Buckling of Sandwich Beams, Plates and Shells , New York: John Wiley & Sons

100%; open Vinson, J.R. and S. Shore. (1965) Find in CUMINCAD Bibliography on Methods of Structural Optimization for Flat Sandwich Panels , Naval Air Engineering Center Report NAEC-ASC-1082

100%; open Vinson, J.R. (2001) Find in CUMINCAD Sandwich Structures , Applied Mechanics Reviews 54(3): 201-14. https://doi.org/10.1115/1.3097295

100%; open Zingre, K.T., E. Yang, and M.P. Wan. (2017) Find in CUMINCAD Dynamic Thermal Performance of Inclined Double-Skin Roof: Modeling and Experimental Investigation , Energy 133: 900-912

last changed 2022/06/07 07:58
pick and add to favorite papersHOMELOGIN (you are user _anon_371196 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002